Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• Re: st: Comparing two response variables
  • From: Joerg Luedicke <[email protected]>
• st: opreg and levpet not working
  • From: Jerry Slice <[email protected]>
• Re: st: how to encode 2 var's?
  • From: Eric Booth <[email protected]>
• Re: st: Comparing two response variables
  • From: Debs Majumdar <[email protected]>
• st: Postdoc positions at UC Berkeley
  • From: Sophia Rabe-Hesketh <[email protected]>
• Re: st: autoregressive conditional poisson (ACP) model
  • From: Robert A Yaffee <[email protected]>
• st: Analysis fo two count vars
  • From: Marlis Gonzalez Fernandez <[email protected]>
• Re: st: how to encode 2 var's?
  • From: Muyang Zhang <[email protected]>
• st: how to encode 2 var's?
  • From: Muyang Zhang <[email protected]>
• RE: st: Comparing two response variables
  • From: "Wooldridge, Jeffrey" <[email protected]>
• Re: st: Comparing two response variables
  • From: Richard Williams <[email protected]>
• Re: st: Comparing two response variables
  • From: Joerg Luedicke <[email protected]>
• Re: st: Collapsing data to daily data
  • From: Brigham Whitman <[email protected]>
• st: Comparing two response variables
  • From: Debs Majumdar <[email protected]>
• Re: st: autoregressive conditional poisson (ACP) model
  • From: "Kristen Shorette" <[email protected]>
• st: From: Matthew Aronson <[email protected]>
  • From: [email protected]
• st: T-tests with Bonferroni after -predict-
  • From: "Bardsley, Phil" <[email protected]>
• Re: st: autoregressive conditional poisson (ACP) model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: RE: Panel Data with Clustered Errors
  • From: "Wooldridge, Jeffrey" <[email protected]>
• st: What analysis to use -count variables
  • From: Marlis Gonzalez Fernandez <[email protected]>
• Re: st: logistic modeling with longitudinal data (NLSY)
  • From: [email protected] (Brendan Halpin)
• Re: st: Category sizes in IF statements - how?
  • From: [email protected] (Brendan Halpin)
• Re: st: How to convert exponential format into numeric values in stata
  • From: Richard Goldstein <[email protected]>
• st: Panel Data with Clustered Errors
  • From: Dmitriy Krichevskiy <[email protected]>
• st: How to convert exponential format into numeric values in stata
  • From: Indu Khurana <[email protected]>
• Re: st: Collapsing data to daily data
  • From: Muyang Zhang <[email protected]>
• Re: st: Collapsing data to daily data
  • From: Austin Nichols <[email protected]>
• st: Collapsing data to daily data
  • From: Brigham Whitman <[email protected]>
• Re: st: Category sizes in IF statements - how?
  • From: [email protected] (Brendan Halpin)
• Re: st: voronoi diagrams in stata
  • From: Austin Nichols <[email protected]>
• RE: st: technical question on the removal of outliers
  • From: Nick Cox <[email protected]>
• st: RE: Precision in outsheet and outfile
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Category sizes in IF statements - how?
  • From: Eric Booth <[email protected]>
• Re: st: Category sizes in IF statements - how?
  • From: Alan Neustadtl <[email protected]>
• st: Category sizes in IF statements - how?
  • From: Jan Fredrik Hovden <[email protected]>
• st: logistic modeling with longitudinal data (NLSY)
  • From: Matthew Aronson <[email protected]>
• Re: st: technical question on the removal of outliers
  • From: Robert A Yaffee <[email protected]>
• st: estimate random effect after -xtlogit-
  • From: "Cohen, Elan" <[email protected]>
• st: autoregressive conditional poisson (ACP) model
  • From: "Kristen Shorette" <[email protected]>
• st: autoregressive conditional poisson (ACP) model
  • From: "Kristen Shorette" <[email protected]>
• Re: st: Poisson regression - Test of goodness of fit
  • From: Steven Samuels <[email protected]>
• Re: st: technical question on the removal of outliers
  • From: Steven Samuels <[email protected]>
• Re: st: Putting multiple ROC curves on a single graph
  • From: Roger Newson <[email protected]>
• Re: st: Fama-Macbech regression procedure
  • From: Maarten buis <[email protected]>
• RE: st: Fama-Macbech regression procedure
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: Fama-Macbech regression procedure
  • From: Syed Basher <[email protected]>
• RE: st: Fama-Macbech regression procedure
  • From: Nick Cox <[email protected]>
• Re: st: Fama-Macbech regression procedure
  • From: Luo Di <[email protected]>
• RE: st: ROC/logistic regression questions
  • From: "Liao, Junlin" <[email protected]>
• Re: st: Fama-Macbech regression procedure
  • From: Maarten buis <[email protected]>
• st: Fama-Macbech regression procedure
  • From: Luo Di <[email protected]>
• Re: st: ROC/logistic regression questions
  • From: "Clyde Schechter" <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: Julian Reif <[email protected]>
• st: Putting multiple ROC curves on a single graph
  • From: "Barth Riley" <[email protected]>
• st: ROCs based on xtmelogit model
  • From: "Barth Riley" <[email protected]>
• st: testing fixed effects versus random effects for clustered data using overiden
  • From: Ridhima Gupta <[email protected]>
• st: FW: estimated autocorrelation coefficient changes sign when dummy variables are included
  • From: Lopa Chakraborti <[email protected]>
• st: voronoi diagrams in stata
  • From: [email protected]
• Re: st: RE: graph interaction curve
  • From: Fabio Zona <[email protected]>
• st: Poisson regression - Test of goodness of fit
  • From: Alexandra Boing <[email protected]>
• Re: st: RE: graph interaction curve
  • From: Maarten buis <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Nick Cox <[email protected]>
• Re: st: technical question on the removal of outliers
  • From: Nick Cox <[email protected]>
• Re: st: "cmp" command and rho LR test statistic for SUR bivariate probit model
  • From: Maarten buis <[email protected]>
• Re: st: technical question on the removal of outliers
  • From: Robert A Yaffee <[email protected]>
• st: "cmp" command and rho LR test statistic for SUR bivariate probit model
  • From: David Quinn <[email protected]>
• st: ROC/logistic regression questions
  • From: "Barth Riley" <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Melissa King <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Chris Hajzler <[email protected]>
• Re: st: seperate text in a variable repeatedly across many variables
  • From: Nick Cox <[email protected]>
• Re: st: Mlogit: Log pseudolikelihood bug?
  • From: Maarten buis <[email protected]>
• Re: st: Mlogit: Log pseudolikelihood bug?
  • From: "Robert L. Hellpap" <[email protected]>
• st: Need help with glcurve
  • From: <[email protected]>
• Re: st: Mlogit: Log pseudolikelihood bug?
  • From: Maarten buis <[email protected]>
• st: biprobit vs treatreg2
  • From: "Andrea Morescalchi" <[email protected]>
• st: Mlogit: Log pseudolikelihood bug?
  • From: "Robert L. Hellpap" <[email protected]>
• Re: st: xtmixed model
  • From: Gordon Hughes <[email protected]>
• Re: st: very small sample comarsion
  • From: Gordon Hughes <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Gordon Hughes <[email protected]>
• RE: re:RE: re:RE: st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• Re: st: Social network
  • From: Emmanuel Koku <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: "Brian P. Poi" <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: Stas Kolenikov <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: Julian Reif <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: "Brian P. Poi" <[email protected]>
• Re: st: technical question on the removal of outliers
  • From: Eric Booth <[email protected]>
• Re: st: GMM with 93+ regressors produces error
  • From: Stas Kolenikov <[email protected]>
• st: technical question on the removal of outliers
  • From: [email protected]
• Re: st: Social network
  • From: "Rom Litwin" <[email protected]>
• st: GMM with 93+ regressors produces error
  • From: Julian Reif <[email protected]>
• Re: st: seperate text in a variable repeatedly across many variables
  • From: Nick cox <[email protected]>
• st: Need help with glcurve
  • From: Stata Stata <[email protected]>
• Re: st: Social network
  • From: Stas Kolenikov <[email protected]>
• Re: st: seperate text in a variable repeatedly across many variables
  • From: "Ben Ammar" <[email protected]>
• Re: st: Social network
  • From: Eric Booth <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: Alan Riley <[email protected]>
• st: SSC Archive
  • From: Christopher Baum <[email protected]>
• RE: st: Stata SE 11.1 memory problem
  • From: "Liao, Junlin" <[email protected]>
• st: xtmixed model
  • From: "Grove-White, Dai" <[email protected]>
• st: Social network
  • From: [email protected]
• re:RE: re:RE: st: FW: comparing xtregar coefficients across models
  • From: Christopher Baum <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Nick cox <[email protected]>
• st: nested loop in mata
  • From: "Frederick Guy" <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: Rebecca Pope <[email protected]>
• Re: st: Log Transformation of Variable
  • From: Eric Booth <[email protected]>
• re: st: randomly select n:1 matched controls per case without replacement?
  • From: "Ariel Linden. DrPH" <[email protected]>
• st: Log Transformation of Variable
  • From: Melissa King <[email protected]>
• Re: st: Re: very small sample comarsion
  • From: Ronan Conroy <[email protected]>
• RE: re:RE: st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• Re: st: how to cite others' code?
  • From: Rebecca Pope <[email protected]>
• re:RE: st: FW: comparing xtregar coefficients across models
  • From: Christopher Baum <[email protected]>
• st: Re: very small sample comarsion
  • From: ajjee <[email protected]>
• RE: st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• RE: st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• Re: st: to write _n in [./.] form
  • From: Christopher Baum <[email protected]>
• st: Re: need help converting smcl to a text document
  • From: Mary Kniskern <[email protected]>
• Re: st: very small sample comarsion
  • From: Ronan Conroy <[email protected]>
• Re: st: how to cite others' code?
  • From: Christopher Baum <[email protected]>
• Re: st: chow test multicollinearity
  • From: Ronan Conroy <[email protected]>
• Re: st: FW: comparing xtregar coefficients across models
  • From: Christopher Baum <[email protected]>
• st: need help converting smcl to a text document
  • From: Mary Kniskern <[email protected]>
• Re: st: chow test multicollinearity
  • From: Fabio Zona <[email protected]>
• st: very small sample comarsion
  • From: ajjee <[email protected]>
• st: chow test multicollinearity
  • From: [email protected]
• Re: st: to write _n in [./.] form
  • From: Nick cox <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: [email protected]
• Re: st: how to cite others' code?
  • From: Rebecca Pope <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: Rebecca Pope <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: Eric Booth <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: [email protected]
• Re: st: database store
  • From: Argyn Kuketayev <[email protected]>
• st: Point Biserial Correlation Calculation
  • From: "Baur, Joshua" <[email protected]>
• Re: st: Stata SE 11.1 memory problem
  • From: Eric Booth <[email protected]>
• Re: st: questions about Fixed Effect models
  • From: Syed Basher <[email protected]>
• st: Stata SE 11.1 memory problem
  • From: [email protected]
• Re: st: to write _n in [./.] form
  • From: Anders Alexandersson <[email protected]>
• RE: st: RE: questions about Fixed Effect models
  • From: "Wooldridge, Jeffrey" <[email protected]>
• Re: st: RE: questions about Fixed Effect models
  • From: Austin Nichols <[email protected]>
• st: estimated autocorrelation coefficient changes sign when dummy variables are included
  • From: Lopa Chakraborti <[email protected]>
• st: RE: questions about Fixed Effect models
  • From: "Wooldridge, Jeffrey" <[email protected]>
• Re: st: RE: graph interaction curve
  • From: Nick cox <[email protected]>
• Re: st: Open-file Security Warning
  • From: Anders Alexandersson <[email protected]>
• st: xtregar coefficients changes sign from random effects to fixed effects
  • From: Lopa Chakraborti <[email protected]>
• Re: st: how to cite others' code?
  • From: Richard Williams <[email protected]>
• Re: st: how to cite others' code?
  • From: Nick cox <[email protected]>
• Re: st: RE: graph interaction curve
  • From: Maarten buis <[email protected]>
• st: how to cite others' code?
  • From: Rebecca Pope <[email protected]>
• RE: st: Open-file Security Warning
  • From: "Westby, Christian Michael. (JSC-SK)[USRA]" <[email protected]>
• st: questions about Fixed Effect models
  • From: Stata Email <[email protected]>
• st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• st: estimated autocorrelation coefficient changes sign when dummy variables are included
  • From: Lopa Chakraborti <[email protected]>
• Re: st: FW: comparing xtregar coefficients across models
  • From: Richard Williams <[email protected]>
• st: FW: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• st: to write _n in [./.] form
  • From: ajjee <[email protected]>
• Re: st: Open-file Security Warning
  • From: Anders Alexandersson <[email protected]>
• Re: st: RE: graph interaction curve
  • From: Fabio Zona <[email protected]>
• st: Open-file Security Warning
  • From: "Westby, Christian Michael. (JSC-SK)[USRA]" <[email protected]>
• Re: st: RE: graph interaction curve
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Fwd: st: database store
  • From: Andrew Dyck <[email protected]>
• st: RE: graph interaction curve
  • From: Nick Cox <[email protected]>
• st: graph interaction curve
  • From: Fabio Zona <[email protected]>
• st: comparing xtregar coefficients across models
  • From: Lopa Chakraborti <[email protected]>
• Re: st: simultaneous bivariate probit with mutual endogeneity
  • From: Michele Mancini <[email protected]>
• st: re: conflicting tests for normality
  • From: Kouji Asakura <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Stas Kolenikov <[email protected]>
• Re: st: simultaneous bivariate probit with mutual endogeneity
  • From: Austin Nichols <[email protected]>
• Re: st: Kernel density plots with p-weights?
  • From: Austin Nichols <[email protected]>
• st: Kernel density plots with p-weights?
  • From: "Wesley Joe" <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Joerg Luedicke <[email protected]>
• Re: st: re: conflicting tests for normality
  • From: Nick Cox <[email protected]>
• st: simultaneous bivariate probit with mutual endogeneity
  • From: Michele Mancini <[email protected]>
• Re: st: re: conflicting tests for normality
  • From: Maarten buis <[email protected]>
• st: re: conflicting tests for normality
  • From: Kouji Asakura <[email protected]>
• st: randomly select n:1 matched controls per case without replacement?
  • From: "Pruitt, Sandi" <[email protected]>
• st: Heteroskedasticity Test in Panel Data - Panel and Non-Panel Test
  • From: Chris Parker <[email protected]>
• Re: st: WBOPENDATA
  • From: JP Azevedo <[email protected]>
• Re: st: Interpreting negative Rho with bivariate probit (partial)
  • From: Maarten buis <[email protected]>
• Re: st: database store
  • From: Neil Shephard <[email protected]>
• st: Interpreting negative Rho with bivariate probit (partial)
  • From: Jean-Christophe Boucher <[email protected]>
• st: Mata : getting covariance matrix with moptimize()
  • From: To Maxime <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Maarten buis <[email protected]>
• Re: st: seperate text in a variable repeatedly across many variables
  • From: Nick Cox <[email protected]>
• st: seperate text in a variable repeatedly across many variables
  • From: "Ben Ammar" <[email protected]>
• Re: st: Generating (simple) spatial variables (excluding the country of observation)
  • From: Waedlich Felix <[email protected]>
• st: Re: database store
  • From: "Joseph Coveney" <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Joerg Luedicke <[email protected]>
• Re: st: graphing Kaplan Meier confidence interval band
  • From: Phil Clayton <[email protected]>
• st: how to use sample weights when pooling cross-sectional surveys
  • From: ANNAMARIA MILAZZO <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Shikha Sinha <[email protected]>
• Re: st: Wald test in Random Coefficient Model
  • From: Joerg Luedicke <[email protected]>
• st: surprising (at least to me) behavior when using -predict- after -mim-
  • From: Jordan H <[email protected]>
• st: Wald test in Random Coefficient Model
  • From: Shikha Sinha <[email protected]>
• st: database store
  • From: Argyn Kuketayev <[email protected]>
• st: back out quantile at given value
  • From: D-Ta <[email protected]>
• st: RE: scale parameter form saved by glm
  • From: Curtis Huffman Espinosa <[email protected]>
• st: RE: How to display multiple stars in correlation matrix
  • From: Nick Cox <[email protected]>
• Re: st: multicollinearity with survey data
  • From: rachel grant <[email protected]>
• st: RE: RE: scale parameter form saved by glm
  • From: Nick Cox <[email protected]>
• st: RE: scale parameter form saved by glm
  • From: Nick Cox <[email protected]>
• Re: st: Fwd: Another question about zero inflated models
  • From: rachel grant <[email protected]>
• RE: st: Bootstrapping Harrell's C - problem with freezing model to establish optimism - stepwise etc.
  • From: "Jon Kroll Bjerregaard" <[email protected]>
• Re: st: Fwd: Another question about zero inflated models
  • From: Joerg Luedicke <[email protected]>
• Re: st: Fwd: Another question about zero inflated models
  • From: rachel grant <[email protected]>
• Re: st: Fwd: Another question about zero inflated models
  • From: Joerg Luedicke <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• st: scale parameter form saved by glm
  • From: Curtis Huffman Espinosa <[email protected]>
• Re: st: Fwd: Another question about zero inflated models
  • From: rachel grant <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Maarten buis <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• st: ROC procedure
  • From: "Liao, Junlin" <[email protected]>
• st: Fwd: Another question about zero inflated models
  • From: rachel grant <[email protected]>
• st: graphing Kaplan Meier confidence interval band
  • From: Nicolás Rojas <[email protected]>
• st: Significance of mixed-effect parameter - arithmetic right, meaning wrong
  • From: "Allan Reese (Cefas)" <[email protected]>
• Antwort: st: -eststo- -esttab- and $ in LaTex code
  • From: Johannes Geyer <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• AW: st: setting subcosts using sqom-ado
  • From: "Tisch Anita" <[email protected]>
• RE: st: RE: initial value of a regressor in panel data
  • From: Humaira Asad <[email protected]>
• Re: st: List of variables with all missing (.) values?
  • From: Nick Cox <[email protected]>
• st: Testing heteroheteroskedasticity in the error distribution after "spatreg"
  • From: Miren Lorea Mendiola Egaña <[email protected]>
• st: Estimating spatial models: error with lagmyvar
  • From: Miren Lorea Mendiola Egaña <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Nick Cox <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• Re: st: List of variables with all missing (.) values?
  • From: Nick Cox <[email protected]>
• Re: st: List of variables with all missing (.) values?
  • From: Maarten buis <[email protected]>
• RE: st: WBOPENDATA
  • From: José Benzinho <[email protected]>
• st: List of variables with all missing (.) values?
  • From: Michael Costello <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Nick Cox <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• Re: st: Simulating an AR(1) in Stata
  • From: Nick Cox <[email protected]>
• Re: st: Adding up constraints in a nonlinear system of share equations
  • From: Nick Cox <[email protected]>
• st: RE: initial value of a regressor in panel data
  • From: Jan Bryla <[email protected]>
• Antwort: st: -eststo- -esttab- and $ in LaTex code
  • From: Richard Ochmann <[email protected]>
• st: IV in duration model
  • From: Stefania Marcassa <[email protected]>
• Re: st: setting subcosts using sqom-ado
  • From: Ulrich Kohler <[email protected]>
• st: poisgof
  • From: Alexandra Boing <[email protected]>
• st: Simulating an AR(1) in Stata
  • From: Syed Basher <[email protected]>
• RE: st: Adding up constraints in a nonlinear system of share equations
  • From: Alex Olssen <[email protected]>
• st: Seemingly unrelated regression for panel data
  • From: Wen Wang <[email protected]>
• st: RE: Postfile "forgets" the postfile
  • From: "Keith Dear" <[email protected]>
• Re: st: GLLAMM fit statistic?
  • From: Joerg Luedicke <[email protected]>
• st: GLLAMM fit statistic?
  • From: Jessi Bishop-royse <[email protected]>
• Re: st: Adding up constraints in a nonlinear system of share equations
  • From: "Brian P. Poi" <[email protected]>
• Re: st: Generating (simple) spatial variables (excluding the country of observation)
  • From: Nick Cox <[email protected]>
• Re: st: Postfile "forgets" the postfile
  • From: Sebastian Eppner <[email protected]>
• st: Postfile "forgets" the postfile
  • From: Sebastian Eppner <[email protected]>
• st: Postfile "forgets" the postfile
  • From: Sebastian Eppner <[email protected]>
• st: Adding up constraints in a nonlinear system of share equations
  • From: Alex Olssen <[email protected]>
• RE: st: RE: saving coefficient matrix for two models
  • From: "Michael Palmer" <[email protected]>
• Re: st: Adjusting Brian Poi's nlsurquaid.ado by removing symmetry conditions and `at' in -nl-
  • From: "Brian P. Poi" <[email protected]>
• AW: st: RE: testing for significant changes in r squared within
  • From: "Jan Mammen" <[email protected]>
• st: initial value of a regressor in panel data
  • From: Humaira Asad <[email protected]>
• RE: st: Bootstrapping Harrell's C - problem with freezing model to establish optimism - stepwise etc.
  • From: "Jon Kroll Bjerregaard" <[email protected]>
• Re: st: Multiple Imputation for panel data
  • From: Clive Nicholas <[email protected]>
• Re: st: multicollinearity with survey data
  • From: Steven Samuels <[email protected]>
• st: -eststo- -esttab- and $ in LaTex code
  • From: Michael Crain <[email protected]>
• Re: st: RE: Re: Generating the sum of a variable
  • From: W R Goe <[email protected]>
• RE: st: Bootstrapping Harrell's C - problem with freezing model to establish optimism - stepwise etc.
  • From: "Jon Kroll Bjerregaard" <[email protected]>
• st: Generating (simple) spatial variables (excluding the country of observation)
  • From: Waedlich Felix <[email protected]>
• st: How to display multiple stars in correlation matrix
  • From: "Alvaro Filipe da Costa" <[email protected]>
• RE: st: multicollinearity with survey data
  • From: Christine Gourin <[email protected]>
• RE: st: multicollinearity with survey data
  • From: Christine Gourin <[email protected]>
• RE: st: Adjusting Brian Poi's nlsurquaid.ado by removing symmetry conditions and `at' in -nl-
  • From: Alex Olssen <[email protected]>
• Re: st: Re: Generating the sum of a variable
  • From: [email protected] (Brendan Halpin)
• st: RE: Re: Generating the sum of a variable
  • From: Nick Cox <[email protected]>
• st: Re: Generating the sum of a variable
  • From: W R Goe <[email protected]>
• RE: st: RE: Atribute variable value to String
  • From: Nick Cox <[email protected]>
• Re: st: RE: Atribute variable value to String
  • From: Lucas Ferreira Mation <[email protected]>
• st: RE: vexing m:m merge
  • From: "Sarah Edgington" <[email protected]>
• st: vexing m:m merge
  • From: Lloyd Dumont <[email protected]>
• Re: st: RE: numlabel gives syntax error on one specific dataset
  • From: Austin Nichols <[email protected]>
• st: xtdpd without LDV, and with excluded instruments
  • From: Hewan Belay <[email protected]>
• RE: st: RE: numlabel gives syntax error on one specific dataset
  • From: Nick Cox <[email protected]>
• Re: st: RE: numlabel gives syntax error on one specific dataset
  • From: Austin Nichols <[email protected]>
• Re: st: WBOPENDATA
  • From: JP Azevedo <[email protected]>
• st: UPDATE: wbopendata
  • From: JP Azevedo <[email protected]>
• Re: st: RE: testing for significant changes in r squared within
  • From: Joerg Luedicke <[email protected]>
• Re: st: saving list of commands
  • From: Maarten buis <[email protected]>
• Re: st: saving list of commands
  • From: Maarten buis <[email protected]>
• Re: st: saving list of commands
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: unfolding mds in stata 10.1?
  • From: [email protected]
• st: setting subcosts using sqom-ado
  • From: "Tisch Anita" <[email protected]>
• st: saving list of commands
  • From: Fabio Zona <[email protected]>
• RE: st: -endog-test under xtivreg2: Jansen's J-stats
  • From: DE SOUZA Eric <[email protected]>
• RE: st: RE: testing for significant changes in r squared within
  • From: Nick Cox <[email protected]>
• Re: st: RE: numlabel gives syntax error on one specific dataset
  • From: Graham Wright <[email protected]>
• RE: st: RE: numlabel gives syntax error on one specific dataset
  • From: Nick Cox <[email protected]>
• st: RE: Stata installation licence
  • From: "Liao, Junlin" <[email protected]>
• Re: st: RE: testing for significant changes in r squared within
  • From: Jan Mammen <[email protected]>
• Re: st: RE: numlabel gives syntax error on one specific dataset
  • From: Maarten buis <[email protected]>
• Re: st: RE: numlabel gives syntax error on one specific dataset
  • From: Graham Wright <[email protected]>
• Re: st: testing for significant changes in r squared within
  • From: Maarten buis <[email protected]>
• Re: st: -endog-test under xtivreg2: Jansen's J-stats
  • From: Ari Dothan <[email protected]>
• Re: st: Stata installation licence
  • From: [email protected]
• st: RE: numlabel gives syntax error on one specific dataset
  • From: Nick Cox <[email protected]>
• Re: st: svy adjustment for rates
  • From: Steven Samuels <[email protected]>
• Re: st: multicollinearity with survey data
  • From: Steven Samuels <[email protected]>
• Re: st: interaction graph
  • From: "Airey, David C" <[email protected]>
• st: RE: testing for significant changes in r squared within
  • From: Nick Cox <[email protected]>
• st: numlabel gives syntax error on one specific dataset
  • From: Graham Wright <[email protected]>
• st: testing for significant changes in r squared within
  • From: Jan Mammen <[email protected]>
• RE: st: margins with post option
  • From: Maarten buis <[email protected]>
• st: RE: Multiple Imputation for panel data
  • From: Nick Cox <[email protected]>
• re: st: -endog-test under xtivreg2: Jansen's J-stats
  • From: Christopher Baum <[email protected]>
• RE: st: margins with post option
  • From: "Cohen, Elan" <[email protected]>
• st: -endog-test under xtivreg2: Jansen's J-stats
  • From: Ari Dothan <[email protected]>
• Re: st: Adjusting Brian Poi's nlsurquaid.ado by removing symmetry conditions and `at' in -nl-
  • From: "Brian P. Poi" <[email protected]>
• re: st: svy adjustment for rates
  • From: "Sujit Rathod" <[email protected]>
• Re: st: interaction graph
  • From: Maarten buis <[email protected]>
• Re: st: RE: Hansen's overidentification test interpretation in xtivreg2
  • From: Ari Dothan <[email protected]>
• Re: st: interaction graph
  • From: Maarten buis <[email protected]>
• Re: st: Multiple Imputation for panel data
  • From: [email protected] (Brendan Halpin)
• st: Stata installation licence
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: multicollinearity with survey data
  • From: rachel grant <[email protected]>
• Re: st: interaction graph
  • From: Fabio Zona <[email protected]>
• Re: st: interaction graph
  • From: Nick Cox <[email protected]>
• Re: st: Multilevel longitudinal analysis with censored data
  • From: Gordon Hughes <[email protected]>
• Re: st: interaction graph
  • From: [email protected]
• st: RE: Hansen's overidentification test interpretation in xtivreg2
  • From: DE SOUZA Eric <[email protected]>
• Re: st: interaction graph
  • From: Nick Cox <[email protected]>
• Re: st: interaction graph
  • From: Fabio Zona <[email protected]>
• st: which graph export vector format
  • From: <[email protected]>
• Re: st: RE: saving coefficient matrix for two models
  • From: Maarten buis <[email protected]>
• st: Hansen's overidentification test interpretation in xtivreg2
  • From: Ari Dothan <[email protected]>
• Re: st: Identical VIF values
  • From: Phil Clayton <[email protected]>
• st: Identical VIF values
  • From: Dave Wilson <[email protected]>
• RE: st: multicollinearity with survey data
  • From: Christine Gourin <[email protected]>
• st: RE: saving coefficient matrix for two models
  • From: "Michael Palmer" <[email protected]>
• st: Adjusting file associations so do-files open in editor?
  • From: Richard Murphy <[email protected]>
• st: Adjusting Brian Poi's nlsurquaid.ado by removing symmetry conditions and `at' in -nl-
  • From: Alex Olssen <[email protected]>
• Re: st: Multiple Imputation for panel data
  • From: Clive Nicholas <[email protected]>
• Re: st: RE: Atribute variable value to String
  • From: Nick Cox <[email protected]>
• re:Re: re: st: Installation for linux "cannot execute binary file"
  • From: Christopher Baum <[email protected]>
• re: st: Atribute variable value to String
  • From: Christopher Baum <[email protected]>
• st: RE: Atribute variable value to String
  • From: "David Radwin" <[email protected]>
• Re: st: Installation for linux "cannot execute binary file"
  • From: Phil Clayton <[email protected]>
• Re: st: margins with post option
  • From: Richard Williams <[email protected]>
• Re: st: Installation for linux "cannot execute binary file"
  • From: Nick Mosely <[email protected]>
• Re: st: margins with post option
  • From: David Muller <[email protected]>
• st: margins with post option
  • From: "Cohen, Elan" <[email protected]>
• Re: st: Installation for linux "cannot execute binary file"
  • From: Phil Clayton <[email protected]>
• st: Atribute variable value to String
  • From: Lucas Ferreira Mation <[email protected]>
• Re: re: st: Installation for linux "cannot execute binary file"
  • From: Nick Mosely <[email protected]>
• re:re: st: Installation for linux "cannot execute binary file"
  • From: Christopher F Baum <[email protected]>
• Re: st: Installation for linux "cannot execute binary file"
  • From: Nick Mosely <[email protected]>
• re: st: Installation for linux "cannot execute binary file"
  • From: Christopher F Baum <[email protected]>
• st: Multiple Imputation for panel data
  • From: "Sun, Yan (IFPRI)" <[email protected]>
• st: Installation for linux "cannot execute binary file"
  • From: Nick Mosely <[email protected]>
• Re: st: RE: Handling big samples
  • From: [email protected]
• Re: st: Compress a closed file
  • From: Steven Dubnoff <[email protected]>
• st: Multilevel longitudinal analysis with censored data
  • From: Bernadette Puckett <[email protected]>
• Re: st: multicollinearity with survey data
  • From: Steven Samuels <[email protected]>
• st: AW: RE: AW: RE: Scatter connection
  • From: "Rilke Rainer Michael" <[email protected]>
• st: RE: AW: RE: Scatter connection
  • From: Nick Cox <[email protected]>
• Re: st: Scatter connection
  • From: Maarten buis <[email protected]>
• st: AW: RE: Scatter connection
  • From: "Rilke Rainer Michael" <[email protected]>
• Re: st: AW: RE: Scatter connection
  • From: Maarten buis <[email protected]>
• st: RE: Scatter connection
  • From: Nick Cox <[email protected]>
• st: Scatter connection
  • From: "Rilke Rainer Michael" <[email protected]>
• st: multicollinearity with survey data
  • From: Christine Gourin <[email protected]>
• Re: st: Handling big samples
  • From: Maarten buis <[email protected]>
• st: Monthly returns compounded annually for various companies
  • From: Alexander Vogt <[email protected]>
• st: RE: Handling big samples
  • From: "Liao, Junlin" <[email protected]>
• RE: st: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• st: Handling big samples
  • From: [email protected]
• RE: st: Stata11SE: hsearch, build error
  • From: "Liao, Junlin" <[email protected]>
• Re: st: Compress a closed file
  • From: Daniel Feenberg <[email protected]>
• Re: st: Partially suppressing output
  • From: Maarten buis <[email protected]>
• st: RE: Partially suppressing output
  • From: Nick Cox <[email protected]>
• Re: st: Stata11SE: hsearch, build error
  • From: Maarten buis <[email protected]>
• st: Partially suppressing output
  • From: Dmitriy Krichevskiy <[email protected]>
• st: RE: Stata11SE: hsearch, build error
  • From: Nick Cox <[email protected]>
• st: Stata11SE: hsearch, build error
  • From: Sami Alkhawaldeh <[email protected]>
• Re: st: svy adjustment for rates
  • From: Steven Samuels <[email protected]>
• Re: st: strgroup
  • From: Neil Shephard <[email protected]>
• Re: st: LEVINSHON-PETRIN COMMANDS
  • From: Markus Eberhardt <[email protected]>
• RE: st: strgroup
  • From: Emily Farchy <[email protected]>
• Re: st: LEVINSHON-PETRIN COMMANDS
  • From: Neil Shephard <[email protected]>
• st: Re: Sargan Test
  • From: momo <[email protected]>
• Re: st: Graph for longitudinal data - calculation based on mortality approach
  • From: Nick Cox <[email protected]>
• st: Graph for longitudinal data - calculation based on mortality approach
  • From: "Timo Beck" <[email protected]>
• st: LEVINSHON-PETRIN COMMANDS
  • From: "[email protected]" <[email protected]>
• Re: st: Compress a closed file
  • From: "Michael N. Mitchell" <[email protected]>
• RE:st: strpos: cleaning string variables (statalist-digest V4 #4072)
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: Compress a closed file
  • From: Nick Cox <[email protected]>
• Re: st: Compress a closed file
  • From: Mohamad Al Ississ <[email protected]>
• st: randon coefficients and level 2 variables in GLLAMM
  • From: Paul Norris <[email protected]>
• st: Compress a closed file
  • From: Mohamad Al Ississ <[email protected]>
• Re: st: ts unit root test
  • From: Markus Eberhardt <[email protected]>
• Re: st: ts unit root test
  • From: Nick Cox <[email protected]>
• st: ts unit root test
  • From: api <[email protected]>
• Re: st: strgroup
  • From: Nick Cox <[email protected]>
• Re: st: RE: strpos: cleaning string variables
  • From: Nick Cox <[email protected]>
• st: sample selection with endogeneity and clusters
  • From: Sarang Deo <[email protected]>
• RE: st: strgroup
  • From: Richard Williams <[email protected]>
• st: using qqvalue with studentized residuals
  • From: "Airey, David C" <[email protected]>
• Re: st: Poisson Regression
  • From: [email protected] (Brendan Halpin)
• Re: st: RE: strpos: cleaning string variables
  • From: Emily Farchy <[email protected]>
• Re: st: AW: strpos: cleaning string variables
  • From: Emily Farchy <[email protected]>
• RE: st: strgroup
  • From: "Liao, Junlin" <[email protected]>
• RE: st: strgroup
  • From: Nick Cox <[email protected]>
• RE: st: strgroup
  • From: "Liao, Junlin" <[email protected]>
• Re: st: WBOPENDATA
  • From: JP Azevedo <[email protected]>
• st: RE: AW: strpos: cleaning string variables
  • From: Nick Cox <[email protected]>
• st: RE: RE: change directory from list
  • From: Nick Cox <[email protected]>
• RE: st: strgroup
  • From: "Liao, Junlin" <[email protected]>
• RE: st: strgroup
  • From: Nick Cox <[email protected]>
• st: AW: strpos: cleaning string variables
  • From: "Hanno Scholtz" <[email protected]>
• st: RE: RE: Read variable labels
  • From: "Liao, Junlin" <[email protected]>
• st: AW: RE: change directory from list
  • From: "Hanno Scholtz" <[email protected]>
• st: RE: change directory from list
  • From: Nick Cox <[email protected]>
• st: RE: strpos: cleaning string variables
  • From: Nick Cox <[email protected]>
• RE: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• st: change directory from list
  • From: "Hanno Scholtz" <[email protected]>
• st: strpos: cleaning string variables
  • From: Emily Farchy <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• st: RE: Read variable labels
  • From: Nick Cox <[email protected]>
• RE: st: strgroup
  • From: Emily Farchy <[email protected]>
• st: RE: Read variable labels
  • From: Nick Cox <[email protected]>
• st: Re: Sargan Test
  • From: momo <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• st: Read variable labels
  • From: "Liao, Junlin" <[email protected]>
• RE: st: construct a loop
  • From: Nick Cox <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• Re: st: strgroup
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• Re: st: strgroup
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: strgroup
  • From: Emily Farchy <[email protected]>
• RE: st: strgroup
  • From: Nick Cox <[email protected]>
• st: strgroup
  • From: Emily Farchy <[email protected]>
• RE: st: best practice for dates and times
  • From: Maarten buis <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: AW: Search for string values in dataset??
  • From: Nick Cox <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• RE: st: construct a loop
  • From: Nick Cox <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• Re: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• RE: st: RE: RE: AW: Search for string values in dataset??
  • From: Nick Cox <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• st: unbalanced panel estimates with lags and dep var censoring
  • From: Lloyd Dumont <[email protected]>
• st: RE: Comparing two different Correlation Coefficents
  • From: Nick Cox <[email protected]>
• Re: st: Search for string values in dataset??
  • From: "Daniel Klein" <[email protected]>
• st: RE: RE: AW: Search for string values in dataset??
  • From: "Liao, Junlin" <[email protected]>
• Re: st: RE: RE: AW: Search for string values in dataset??
  • From: Eric Booth <[email protected]>
• [no subject]
  • From: [email protected]
• st: RE: RE: AW: Search for string values in dataset??
  • From: "Liao, Junlin" <[email protected]>
• st: RE: AW: Search for string values in dataset??
  • From: "Liao, Junlin" <[email protected]>
• Re: st: Comparing two different Correlation Coefficents
  • From: Roger Newson <[email protected]>
• Re: st: best practice for dates and times
  • From: "Joseph Coveney" <[email protected]>
• st: AW: Search for string values in dataset??
  • From: "Wiemann, Markus" <[email protected]>
• st: Search for string values in dataset??
  • From: miyu Lee <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• RE: st: best practice for dates and times
  • From: Maarten buis <[email protected]>
• st: Comparing two different Correlation Coefficents
  • From: "Rilke Rainer Michael" <[email protected]>
• RE: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• Re: st: Bootstrapping Harrell's C - problem with freezing model to establish optimism - stepwise etc.
  • From: Roger Newson <[email protected]>
• RE: st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• st: -datacheck- data management utility available via SSC
  • From: <[email protected]>
• Re: st: RE: using xtivreg2 for FE
  • From: Murod Aliyev <[email protected]>
• RE: st: RE: using xtivreg2 for FE
  • From: DE SOUZA Eric <[email protected]>
• Re: st: hbar graph & colour
  • From: María Edo <[email protected]>
• Re: st: RE: using xtivreg2 for FE
  • From: Maarten buis <[email protected]>
• Re: st: RE: using xtivreg2 for FE
  • From: Murod Aliyev <[email protected]>
• Re: st: hbar graph & colour
  • From: "Seed, Paul" <[email protected]>
• st: svy adjustment for rates
  • From: "Sujit Rathod" <[email protected]>
• Re: st: question on zero inflated regression
  • From: Nicola Man <[email protected]>
• st: calculating value weighted portfolio returns
  • From: [email protected]
• st: sample selection with endogeneity and clusters
  • From: Sarang Deo <[email protected]>
• st: RE: using xtivreg2 for FE
  • From: "Schaffer, Mark E" <[email protected]>
• Subject: RE: RE: st: A bug in egen and gen?
  • From: "Clyde Schechter" <[email protected]>
• st: Spatial logit/probit model
  • From: "Chiang Hsieh, Lin-Han" <[email protected]>
• st: WBOPENDATA
  • From: José Benzinho <[email protected]>
• st: Data Sets
  • From: Anneliese Schmaus <[email protected]>
• Re: st: construct a loop
  • From: "Daniel Klein" <[email protected]>
• Re: st: hbar graph & colour
  • From: Nick Cox <[email protected]>
• Re: st: Re: ntimeofday-- format and calculation problems with date and time
  • From: Nick Cox <[email protected]>
• Re: st: construct a loop
  • From: Nick Cox <[email protected]>
• Re: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• st: Re: ntimeofday-- format and calculation problems with date and time
  • From: "Joseph Coveney" <[email protected]>
• st: ntimeofday-- format and calculation problems with date and time
  • From: Alison McCarthy <[email protected]>
• Re: st: hbar graph & colour
  • From: Sergiy Radyakin <[email protected]>
• st: hbar graph & colour
  • From: María Edo <[email protected]>
• Re: st: best practice for dates and times
  • From: Michael McCulloch <[email protected]>
• Re: st: construct a loop
  • From: "Daniel Klein" <[email protected]>
• Re: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• Re: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• Re: st: best practice for dates and times
  • From: Nick Cox <[email protected]>
• st: best practice for dates and times
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• re: RE: st: hpfilter no longer creates a filtered series
  • From: Christopher Baum <[email protected]>
• RE: st: hpfilter no longer creates a filtered series
  • From: Edinaldo Tebaldi <[email protected]>
• Re: st: construct a loop
  • From: Nick Cox <[email protected]>
• Re: st: copying last reported value
  • From: Nick Cox <[email protected]>
• re: st: copying last reported value
  • From: Christopher Baum <[email protected]>
• re: st: hpfilter no longer creates a filtered series
  • From: Christopher Baum <[email protected]>
• st: export to excel after stmh command
  • From: Nikolaos Pandis <[email protected]>
• st: copying last reported value
  • From: mai7777 <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• st: hpfilter no longer creates a filtered series
  • From: Edinaldo Tebaldi <[email protected]>
• st: RE: RE: construct a loop
  • From: "Liao, Junlin" <[email protected]>
• st: RE: construct a loop
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: using xtivreg2 for FE
  • From: Murod Aliyev <[email protected]>
• Re: st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• Re: st: construct a loop
  • From: "Daniel Klein" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• st: construct a loop
  • From: Nikolaos Pandis <[email protected]>
• Re: st: Data Sets
  • From: Robert A Yaffee <[email protected]>
• Re: st: FW: How can I analyse a timeseries dataset appropriately?
  • From: Gordon Hughes <[email protected]>
• st: Bootstrapping Harrell's C - problem with freezing model to establish optimism - stepwise etc.
  • From: "Jon Kroll Bjerregaard" <[email protected]>
• Re: st: graphs into latex lose their text
  • From: Nick Sanders <[email protected]>
• RE: st: graphs into latex lose their text
  • From: "Porter, Stephen R [EL PS]" <[email protected]>
• re: st: graphs into latex lose their text
  • From: Christopher Baum <[email protected]>
• st: Specification tests
  • From: Ehsan Latif <[email protected]>
• st: graphs into latex lose their text
  • From: "Porter, Stephen R [EL PS]" <[email protected]>
• Re: st: Data Sets
  • From: Conor Hughes <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Sarah Edgington" <[email protected]>
• Re: st: RE: RE: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: Maarten buis <[email protected]>
• Re: st: RE: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: Roger Newson <[email protected]>
• st: RE: RE: RE: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: "Liao, Junlin" <[email protected]>
• st: RE: RE: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: Data Sets
  • From: martine etienne <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: David Kantor <[email protected]>
• RE: st: A bug in egen and gen?
  • From: David Kantor <[email protected]>
• st: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: "Liao, Junlin" <[email protected]>
• st: RE: RE: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: Nick Cox <[email protected]>
• RE: st: Stata 11 Random Effects--Std. Errors
  • From: sofia <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: STATA 11 Fixed Effects Autocorrelation
  • From: sofia <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• Re: st: Data Sets
  • From: Markus Eberhardt <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: st: Query on "predict"
  • From: "Siyam, Amani" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: David Kantor <[email protected]>
• RE: RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: A bug in egen and gen?
  • From: "Joseph Coveney" <[email protected]>
• Re: st: Query on "predict"
  • From: Scott Merryman <[email protected]>
• Re: st: Query on "predict"
  • From: Richard Williams <[email protected]>
• re: RE: st: A bug in egen and gen?
  • From: Christopher Baum <[email protected]>
• Antwort: st: re: Sargan test
  • From: Johannes Geyer <[email protected]>
• st: Data Sets
  • From: [email protected]
• st: re: Sargan test
  • From: Christopher Baum <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Marcello Pagano <[email protected]>
• Re: st: Query on "predict"
  • From: Maarten buis <[email protected]>
• st: Query on "predict"
  • From: "Siyam, Amani" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• st: From: ipianah nic <[email protected]>
  • From: [email protected]
• st: incidence rates
  • From: ipianah nic <[email protected]>
• RE: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• st: From: ipianah nic <[email protected]>
  • From: [email protected]
• RE: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• st: Sargan Test
  • From: momo <[email protected]>
• st: gllamm bivariate probit randome effects
  • From: "Frank Muehsam" <[email protected]>
• Re: st: checking model fit with svy estimation on
  • From: Bart van Rijsbergen <[email protected]>
• Re: st: stpower cox with a binary covariate
  • From: Anders Gaarsdal Holst <[email protected]>
• RE: RE: st: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: Zhiqiang Wang <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Mark Nichols <[email protected]>
• Re: st: checking model fit with svy estimation on
  • From: Steven Samuels <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: how to add error bars to each data marker on a line graph (or the size of the data marker reflect the confidence interval)?
  • From: Xin Lu <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: checking model fit with svy estimation on
  • From: Cheney <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Sarah Edgington" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: instrumental variable for binary outcome panel data
  • From: Michael Weinerman <[email protected]>
• RE: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Maarten buis <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• Re: st: question on zero inflated regression
  • From: rachel grant <[email protected]>
• Re: st: stpower cox with a binary covariate
  • From: Steven Samuels <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Sarah Edgington" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: RE: how to calculate the accumulative work experience for panel data
  • From: Nick Cox <[email protected]>
• Re: st: RE: how to calculate the accumulative work experience for panel data
  • From: Hey Sky <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• st: stpower cox with a binary covariate
  • From: Anders Gaarsdal Holst <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: re:st: pscore question
  • From: Dan Kimmel <[email protected]>
• Re: st: RE: how to calculate the accumulative work experience for panel data
  • From: Nick Cox <[email protected]>
• RE: st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• RE: st: how to construct a mean squared Euclidean measure?
  • From: "[email protected]" <[email protected]>
• RE: st: how to construct a mean squared Euclidean measure?
  • From: "[email protected]" <[email protected]>
• Re: st: GLLAMM SYNTAX MEDIATION
  • From: Stas Kolenikov <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Stas Kolenikov <[email protected]>
• st: Restriction options when doing propensity score matcing
  • From: Dimitrije Tišma <[email protected]>
• RE: st: GLLAMM SYNTAX MEDIATION
  • From: "Smith, Stephanie Moller" <[email protected]>
• st: FW: How can I analyse a timeseries dataset appropriately?
  • From: "Claus D. Hansen" <[email protected]>
• Re: re:st: pscore question
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: A bug in egen and gen?
  • From: Nick Cox <[email protected]>
• st: A bug in egen and gen?
  • From: "Liao, Junlin" <[email protected]>
• Re: st: how to construct a mean squared Euclidean measure?
  • From: David Kantor <[email protected]>
• Re: st: Individual log likelihoods
  • From: Maarten buis <[email protected]>
• Re: st: RE: how to calculate the accumulative work experience for panel data
  • From: Hey Sky <[email protected]>
• Re: st: how to construct a mean squared Euclidean measure?
  • From: Mike Lacy <[email protected]>
• st: Evaluating Portfolio Performance
  • From: Sheldon Marker <[email protected]>
• Re: st: GLLAMM SYNTAX MEDIATION
  • From: Stas Kolenikov <[email protected]>
• st: RE: how to calculate the accumulative work experience for panel data
  • From: Nick Cox <[email protected]>
• RE: st: RE: Membership (component) Determinant using FMM Command
  • From: Nick Cox <[email protected]>
• Re: st: RE: Membership (component) Determinant using FMM Command
  • From: Allen Young <[email protected]>
• st: RE: Individual log likelihoods
  • From: Nick Cox <[email protected]>
• st: Individual log likelihoods
  • From: Davide Contu <[email protected]>
• RE: st: GLLAMM SYNTAX MEDIATION
  • From: "Smith, Stephanie Moller" <[email protected]>
• Re: st: GLLAMM SYNTAX MEDIATION
  • From: Stas Kolenikov <[email protected]>
• st: how to calculate the accumulative work experience for panel data
  • From: Hey Sky <[email protected]>
• st: GLLAMM SYNTAX MEDIATION
  • From: "Smith, Stephanie Moller" <[email protected]>
• st: clustered standard errors with panel & hierarchical data within year
  • From: Veronika <[email protected]>
• st: Tables from -episens-
  • From: Alberto R Osella <[email protected]>
• RE: st: question on zero inflated regression
  • From: Nick Cox <[email protected]>
• Re: st: question on zero inflated regression
  • From: rachel grant <[email protected]>
• st: RE: RE: RE: RE: how to construct a mean squared Euclidean measure?
  • From: "[email protected]" <[email protected]>
• st: RE: RE: RE: how to construct a mean squared Euclidean measure?
  • From: Nick Cox <[email protected]>
• st: RE: RE: how to construct a mean squared Euclidean measure?
  • From: "[email protected]" <[email protected]>
• Re: st: question on zero inflated regression
  • From: Maarten buis <[email protected]>
• Re: st: question on zero inflated regression
  • From: rachel grant <[email protected]>
• st: Good Practices reporting Dynamic Panel Data results
  • From: Pablo Esteban Jimenez <[email protected]>
• Re: st: question on zero inflated regression
  • From: Nicola Man <[email protected]>
• Re: st: how to get the mean value for this panel data?
  • From: Hey Sky <[email protected]>
• Re: st: how to get the mean value for this panel data?
  • From: David Kantor <[email protected]>
• st: how to get the mean value for this panel data?
  • From: Hey Sky <[email protected]>
• re: Re: Re: RE: st: How to run 2SLS twice
  • From: Christopher Baum <[email protected]>
• Re: Re: RE: st: How to run 2SLS twice
  • From: Mauro Caselli <[email protected]>
• Re: st: graph bar - how to add 'external' label above stacked bar chart
  • From: Nick Cox <[email protected]>
• Re: st: graph bar - how to add 'external' label above stacked bar chart
  • From: Phil Clayton <[email protected]>
• Re: st: Poisson regression- Test of goodness of fit
  • From: Owen Gallupe <[email protected]>
• st: graph bar - how to add 'external' label above stacked bar chart
  • From: Vianney <[email protected]>
• Re: st: Means of the first differences
  • From: Nick Cox <[email protected]>
• Re: st: RE: Membership (component) Determinant using FMM Command
  • From: Partha Deb <[email protected]>
• st: re: rolling correlation help
  • From: Christopher F Baum <[email protected]>
• st: Means of the first differences
  • From: Ehsan Latif <[email protected]>
• st: RE: RE: RE: RE: IV Command and Reported Results Problem
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: IV Command and Reported Results Problem
  • From: Sinan Hastorun <[email protected]>
• st: RE: Forming risksets in matched case control studies
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: IV Command and Reported Results Problem
  • From: Nick Cox <[email protected]>
• Re: st: binary_mediation
  • From: Bo MacInnis <[email protected]>
• st: Forming risksets in matched case control studies
  • From: Nasheed Moqueet <[email protected]>
• st: RE: RE: IV Command and Reported Results Problem
  • From: Sinan Hastorun <[email protected]>
• Re: st: RE: rolling correlation help
  • From: Scott Merryman <[email protected]>
• st: RE: RE: multiple means by state
  • From: Nick Cox <[email protected]>
• st: RE: multiple means by state
  • From: "Millimet, Daniel" <[email protected]>
• st: multiple means by state
  • From: "Jared JS Olesen" <[email protected]>
• st: RE: rolling correlation help
  • From: Nick Cox <[email protected]>
• Re: st: RE: Membership (component) Determinant using FMM Command
  • From: Allen Young <[email protected]>
• Re: st: Membership (component) Determinant using FMM Command
  • From: Allen Young <[email protected]>
• Re: st: Re: Comparing economic situation before and after a specific event
  • From: Ayman Farahat <[email protected]>
• st: RE: RE: IV Command and Reported Results Problem
  • From: Nick Cox <[email protected]>
• st: Poisson regression- Test of goodness of fit
  • From: Alexandra Boing <[email protected]>
• st: RE: RE: Re: problem with ivregress
  • From: DE SOUZA Eric <[email protected]>
• st: Re: Comparing economic situation before and after a specific event
  • From: ajjee <[email protected]>
• st: rolling correlation help
  • From: Emma Wetten <[email protected]>
• st: RE: statalist-digest V4 #4066
  • From: "Seed, Paul" <[email protected]>
• Re: st: Re: problem with ivregress
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: RE: Re: problem with ivregress
  • From: Sinan Hastorun <[email protected]>
• Re: st: main effect insignificant, interaction term significant
  • From: Maarten buis <[email protected]>
• RE: st: Re: problem with ivregress
  • From: DE SOUZA Eric <[email protected]>
• st: RE: IV Command and Reported Results Problem
  • From: Sinan Hastorun <[email protected]>
• st: RE: how to construct a mean squared Euclidean measure?
  • From: Nick Cox <[email protected]>
• Re: st: STATA11 do editor
  • From: Tirthankar Chakravarty <[email protected]>
• st: STATA11 do editor
  • From: nigussie Tefera <[email protected]>
• Re: st: Membership (component) Determinant using FMM Command
  • From: Scott Merryman <[email protected]>
• st: RE: IV Command and Reported Results Problem
  • From: Nick Cox <[email protected]>
• st: RE: Membership (component) Determinant using FMM Command
  • From: Nick Cox <[email protected]>
• RE: st: RE: Defining input and output variables when calling a program
  • From: Svend Juul <[email protected]>
• st: Membership (component) Determinant using FMM Command
  • From: Allen Young <[email protected]>
• st: IV Command and Reported Results Problem
  • From: Sinan Hastorun <[email protected]>
• st: how to construct a mean squared Euclidean measure?
  • From: "[email protected]" <[email protected]>
• Re: st: main effect insignificant, interaction term significant
  • From: Richard Goldstein <[email protected]>
• st: main effect insignificant, interaction term significant
  • From: Gáti Annamária <[email protected]>
• st: RE: Graph, Scatterline?
  • From: Nick Cox <[email protected]>
• st: Graph, Scatterline?
  • From: "Rilke Rainer Michael" <[email protected]>
• RE: re:st: pscore question
  • From: "Millimet, Daniel" <[email protected]>
• Re: re:st: pscore question
  • From: Dan Kimmel <[email protected]>
• RE: st: RE: Defining input and output variables when calling a program
  • From: Nick Cox <[email protected]>
• Re: st: Re: problem with ivregress
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: RE: Defining input and output variables when calling a program
  • From: Svend Juul <[email protected]>
• st: RE: Defining input and output variables when calling a program
  • From: Nick Cox <[email protected]>
• st: Defining input and output variables when calling a program
  • From: Svend Juul <[email protected]>
• st: unit root in balanced panel
  • From: Andreas Pondorfer <[email protected]>
• Re: st: Comparing economic situation before and after a specific event
  • From: Maarten buis <[email protected]>
• Re: st: Prediction after a Xtlogit
  • From: Maarten buis <[email protected]>
• st: likelihood for censored negative binomial
  • From: giovanni russo <[email protected]>
• st: Comparing economic situation before and after a specific event
  • From: ajjee <[email protected]>
• st: Incorporating time varying variable into discrete time model
  • From: <[email protected]>
• Re: st: stochastic frontier model with technical efficiency determining factors
  • From: Natalie Trapp <[email protected]>
• Re: st: RE: Multilevel survival analysis
  • From: Maarten buis <[email protected]>
• Re: Re: RE: st: How to run 2SLS twice
  • From: Mauro Caselli <[email protected]>
• st: testing for difference between quantile regression coefficients
  • From: ics <[email protected]>
• re:Re: RE: st: How to run 2SLS twice
  • From: Christopher Baum <[email protected]>
• st: binary_mediation
  • From: Bo MacInnis <[email protected]>
• Re: RE: st: How to run 2SLS twice
  • From: Mauro Caselli <[email protected]>
• st: Incorporating time varying variable into discrete time model
  • From: Mike <[email protected]>
• Re: st: RE: Multilevel survival analysis
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Multilevel survival analysis
  • From: Katie Brooks Biello <[email protected]>
• st: RE: RE: RE: sequential graphing
  • From: Nick Cox <[email protected]>
• st: RE: RE: sequential graphing
  • From: "Lim, Raymond" <[email protected]>
• st: RE: Scatterplot with weighted markers
  • From: Nick Cox <[email protected]>
• st: Prediction after a Xtlogit
  • From: Milet Emmanuel <[email protected]>
• RE: st: reshape command without a j( ) variable using Stata 8
  • From: Nick Cox <[email protected]>
• st: RE: RE: creating new variables with local macro contents
  • From: "Nelson, Carl" <[email protected]>
• Re: st: Scatterplot with weighted markers
  • From: Maarten buis <[email protected]>
• st: Scatterplot with weighted markers
  • From: "Allan Reese (Cefas)" <[email protected]>
• RE: st: RE: PS on Stata colours
  • From: DE SOUZA Eric <[email protected]>
• RE: st: reshape command without a j( ) variable using Stata 8
  • From: Nick Cox <[email protected]>
• Re: st: reshape command without a j( ) variable using Stata 8
  • From: Maarten buis <[email protected]>
• st: RE: creating new variables with local macro contents
  • From: Nick Cox <[email protected]>
• Re: st: RE: PS on Stata colours
  • From: Neil Shephard <[email protected]>
• RE: st: RE: SIPP survey in stata - calculations
  • From: Jimmy Jin <[email protected]>
• Re: st: reshape command without a j( ) variable using Stata 8
  • From: Karen Rappaport <[email protected]>
• RE: st: RE: PS on Stata colours
  • From: [email protected]
• st: creating new variables with local macro contents
  • From: "Nelson, Carl" <[email protected]>
• Re: st: looping over several macros
  • From: Maarten buis <[email protected]>
• st: RE: looping over several macros
  • From: Nick Cox <[email protected]>
• st: RE: RE: sequential graphing
  • From: Nick Cox <[email protected]>
• st: RE: Poisson Regression
  • From: [email protected]
• Re: st: looping over several macros
  • From: Maarten buis <[email protected]>
• Re: st: RE: SIPP survey in stata - calculations
  • From: Austin Nichols <[email protected]>
• RE: st: RE: PS on Stata colours
  • From: Nick Cox <[email protected]>
• Re: st: RE: PS on Stata colours
  • From: Marcello Pagano <[email protected]>
• Re: st: RE: PS on Stata colours
  • From: Marcello Pagano <[email protected]>
• st: RE: sequential graphing
  • From: "Lim, Raymond" <[email protected]>
• st: looping over several macros
  • From: John Holmes <[email protected]>
• st: RE: SIPP survey in stata - calculations
  • From: Jimmy Jin <[email protected]>
• Re: st: FMM Command
  • From: Allen Young <[email protected]>
• re: st: IV test for nondynamic panel data estimation
  • From: Hewan Belay <[email protected]>
• st: RE: Fwd: Problem with lag operator
  • From: Nick Cox <[email protected]>
• st: RE: PS on Stata colours
  • From: Nick Cox <[email protected]>
• st: Fwd: Problem with lag operator
  • From: Eleonora Paesen <[email protected]>
• Re: st: stochastic frontier model with technical efficiency determining factors
  • From: Gordon Hughes <[email protected]>
• st: PS on Stata colours
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: lag vars
  • From: Sabrina Carrossa <[email protected]>
• st: stochastic frontier model with technical efficiency determining factors
  • From: Natalie Trapp <[email protected]>
• RE: st: RE: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• RE: st: RE: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• Re: st: lag vars
  • From: Sabrina Carrossa <[email protected]>
• RE: st: lag vars
  • From: Nick Cox <[email protected]>
• re:RE: st: How to run 2SLS twice
  • From: Christopher Baum <[email protected]>
• RE: st: How to run 2SLS twice
  • From: DE SOUZA Eric <[email protected]>
• st: Re: problem with ivregress
  • From: Christopher Baum <[email protected]>
• Re: st: How to run 2SLS twice
  • From: Christopher Baum <[email protected]>
• st: lag vars
  • From: Sabrina Carrossa <[email protected]>
• Re: st: how to write model equation for probit with cluster
  • From: "Laura R." <[email protected]>
• Re: st: what does Stata do with the fixed-effect in Xtlogit
  • From: Milet Emmanuel <[email protected]>
• st: what does Stata do with the fixed-effect in Xtlogit
  • From: Milet Emmanuel <[email protected]>
• Re: st: what does Stata do with the fixed-effect in Xtlogit
  • From: Klaus Pforr <[email protected]>
• Re: st: RE: Poisson Regression
  • From: [email protected] (Brendan Halpin)
• st: New programs -calibrate- and -calibest- on SSC
  • From: "John D'Souza" <John.D'[email protected]>
• RE: st: RE: Poisson Regression
  • From: Alexandra Boing <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: Maarten buis <[email protected]>
• RE: st: RE: Poisson Regression
  • From: Maarten buis <[email protected]>
• Re: st: reshape command without a j( ) variable using Stata 8
  • From: Nick Cox <[email protected]>
• Re: st: Exploring graph colors / colours
  • From: [email protected] (Vince Wiggins, StataCorp)
• Re: st: reshape command without a j( ) variable using Stata 8
  • From: Karen Rappaport <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: Mauro Caselli <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: "Fernando Rios Avila" <[email protected]>
• Re: st: reshape command without a j( ) variable using Stata 8
  • From: "Justina Fischer" <[email protected]>
• st: reshape command without a j( ) variable using Stata 8
  • From: Karen Rappaport <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: David Muller <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: Mauro Caselli <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: David Muller <[email protected]>
• Re: st: Random draws from multivariate normal not centered at the mean
  • From: David Muller <[email protected]>
• st: Random draws from multivariate normal not centered at the mean
  • From: Mauro Caselli <[email protected]>
• st: RES: RE: RES: RE: Poisson Regression
  • From: José Maria Pacheco de Souza <[email protected]>
• Re: st: RE: Poisson Regression
  • From: [email protected] (Brendan Halpin)
• re: st: IV test for nondynamic panel data estimation
  • From: Christopher F Baum <[email protected]>
• Re: st: RE: Problem with ivregress
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: RE: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• st: RE: sequential graphing
  • From: Nick Cox <[email protected]>
• Re: st: splitting strings
  • From: Daniel Henriksen <[email protected]>
• st: RE: RES: RE: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• st: Problem with ivregress
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: IV test for nondynamic panel data estimation
  • From: Hewan Belay <[email protected]>
• st: RE: Problem with ivregress
  • From: Nick Cox <[email protected]>
• st: FMM Command
  • From: Allen Young <[email protected]>
• Re: st: Multilevel survival analysis
  • From: Amir Sariaslan <[email protected]>
• st: RE: Multilevel survival analysis
  • From: "Figueroa Armijos, Maria Augusta (MU-Student)" <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: RE: Poisson Regression
  • From: [email protected] (Brendan Halpin)
• st: Multilevel survival analysis
  • From: Katie Brooks Biello <[email protected]>
• st: RES: RE: Poisson Regression
  • From: José Maria Pacheco de Souza <[email protected]>
• st: Seemingly unrelated conditional logit
  • From: Matthew Wibbenmeyer <[email protected]>
• st: RE: Poisson Regression
  • From: "Visintainer, Paul" <[email protected]>
• R: st: Poisson Regression
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: year-fixed effects in monthly panel
  • From: Abhimanyu Arora <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: <[email protected]>
• RE: st: logit and mfx
  • From: "Figueroa Armijos, Maria Augusta (MU-Student)" <[email protected]>
• st: problems with prediction using gllapred and ci marg mu
  • From: "Joe Zickafoose" <[email protected]>
• Re: st: mark spell
  • From: Jörg Eulenberger <[email protected]>
• Re: st: mark spell
  • From: Nick Cox <[email protected]>
• st: mark spell
  • From: Jörg Eulenberger <[email protected]>
• AW: AW: AW: RE: RE: st: Unit roots in non linear regression models
  • From: Johannes Muck <[email protected]>
• Re: st: mtreatreg - marginal effects
  • From: Francesca Fabbri <[email protected]>
• Re: st: RE: CDF log-normal and histogram
  • From: Maarten buis <[email protected]>
• R: Re: st: moving-window products
  • From: "[email protected]" <[email protected]>
• Re: st: RE: CDF log-normal and histogram
  • From: Nick Cox <[email protected]>
• Re: st: Poisson Regression
  • From: Maarten buis <[email protected]>
• Re: st: RE: CDF log-normal and histogram
  • From: Beatrice Crozza <[email protected]>
• Re: st: Poisson Regression
  • From: Alexandra Boing <[email protected]>
• st: Exploring graph colors / colours
  • From: "Allan Reese (Cefas)" <[email protected]>
• st: How to run 2SLS twice
  • From: Mauro Caselli <[email protected]>
• Re: st: Including left-censored data in survival model
  • From: Ronan Conroy <[email protected]>
• Re: st: moving-window products
  • From: Nick Cox <[email protected]>
• Re: st: question on zero inflated regression
  • From: Nick Cox <[email protected]>
• st: moving-window products
  • From: "[email protected]" <[email protected]>
• Re: st: question on zero inflated regression
  • From: rachel grant <[email protected]>
• Re: st: generating a word table including the first stage regression(s) with an iv-regression
  • From: Leslie Neubecker <[email protected]>
• Re: st: Poisson Regression
  • From: Maarten buis <[email protected]>
• st: Three simulateneous equations - one being logit
  • From: "Wiemann, Markus" <[email protected]>
• Re: st: splitting strings
  • From: Daniel Henriksen <[email protected]>
• st: Re: st: Calculate response rate (proportio​​​n of non-missin​​​g value)
  • From: Maarten buis <[email protected]>
• st: R: Poisson Regression
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: logit and mfx
  • From: "Daniel Klein" <[email protected]>
• Re: st: logit and mfx
  • From: Maarten buis <[email protected]>
• st: logit and mfx
  • From: "Figueroa Armijos, Maria Augusta (MU-Student)" <[email protected]>
• st: Calculate response rate (proportio​​​n of non-missin​​​g value)
  • From: Guo Chen <[email protected]>
• Re: st: mtreatreg - marginal effects
  • From: Partha Deb <[email protected]>
• Re: st: Generating a Variable
  • From: Nick Cox <[email protected]>
• st: Condition number /co linearity in two stage Heckman
  • From: Ayman Farahat <[email protected]>
• Re: st: SIPP survey in stata - calculations
  • From: David Kantor <[email protected]>
• Re: st: Generating a Variable
  • From: Don Ruby <[email protected]>
• Re: st: Generating a Variable
  • From: Nick Cox <[email protected]>
• Re: st: interpretation of pvar
  • From: Clive Nicholas <[email protected]>
• st: interpretation of pvar
  • From: Biljana Jonoska <[email protected]>
• Re: st: question on zero inflated regression
  • From: Owen Gallupe <[email protected]>
• st: Poisson Regression
  • From: Alexandra Boing <[email protected]>
• st: SIPP survey in stata - calculations
  • From: Tharshini Thangavelu <[email protected]>
• Re: st: RE: panel VECM
  • From: Biljana Jonoska <[email protected]>
• st: question on zero inflated regression
  • From: rachel grant <[email protected]>
• Re: st: sequential graphing
  • From: Christopher Baum <[email protected]>
• Re: st: variable algorithm
  • From: David Kantor <[email protected]>
• st: sequential graphing
  • From: "Lim, Raymond" <[email protected]>
• Re: st: replication weights for data with strata with single PSU
  • From: Steven Samuels <[email protected]>
• st: Generating a Variable
  • From: Don Ruby <[email protected]>
• Re: st: variable algorithm
  • From: Michael McCulloch <[email protected]>
• Re: st: variable algorithm
  • From: Jet <[email protected]>
• Re: st: variable algorithm
  • From: Marcello Pagano <[email protected]>
• Re: st: variable algorithm
  • From: Marcello Pagano <[email protected]>
• st: variable algorithm
  • From: Jet <[email protected]>
• st: endogenous multivariate probit
  • From: "Andrea Morescalchi" <[email protected]>
• Re: AW: AW: RE: RE: st: Unit roots in non linear regression models
  • From: Syed Basher <[email protected]>
• Re: st: What is the default order in which colors are used in Stata graphs?
  • From: Venable <[email protected]>
• RE: AW: RE: RE: st: Unit roots in non linear regression models
  • From: DE SOUZA Eric <[email protected]>
• Re: st: What is the default order in which colors are used in Stata graphs?
  • From: Christopher Baum <[email protected]>
• AW: AW: RE: RE: st: Unit roots in non linear regression models
  • From: Johannes Muck <[email protected]>
• Re: st: What is the default order in which colors are used in Stata graphs?
  • From: Nick Cox <[email protected]>
• Re: st: Interactions between tsset and sort
  • From: Nick Cox <[email protected]>
• RE: st: xtdpdsys and outreg2
  • From: Pablo Esteban Jimenez <[email protected]>
• Re: st: Survey on income and program participation
  • From: Austin Nichols <[email protected]>
• st: What is the default order in which colors are used in Stata graphs?
  • From: Venable <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: Scott Merryman <[email protected]>
• Re: st: EGEN GROUP where order doesn't matter?
  • From: Don Ruby <[email protected]>
• re: st: xtdpdsys and outreg2
  • From: Christopher Baum <[email protected]>
• st: replication weights for data with strata with single PSU
  • From: "McCabe, Patrick J" <[email protected]>
• st: xtdpdsys and outreg2
  • From: Pablo Esteban Jimenez <[email protected]>
• st: -svmat- with matrix colnames based on factor variable names?
  • From: <[email protected]>
• Re: st: how to write model equation for probit with cluster
  • From: Maarten buis <[email protected]>
• st: mtreatreg - marginal effects
  • From: "Francesca Fabbri" <[email protected]>
• st: Survey on income and program participation
  • From: Tharshini Thangavelu <[email protected]>
• st: R: Including left-censored data in survival model
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: Interactions between tsset and sort
  • From: Gordon Hughes <[email protected]>
• st: how to write model equation for probit with cluster
  • From: "Laura R." <[email protected]>
• st: Hausman Taylor estimation
  • From: momo <[email protected]>
• st: RE: panel VECM
  • From: DE SOUZA Eric <[email protected]>
• Re: st: New Panel Time Series commands available from SSC
  • From: Syed Basher <[email protected]>
• Antwort: st: re: Hausman test results
  • From: Justina Fischer <[email protected]>
• st: re: Hausman test results
  • From: Christopher Baum <[email protected]>
• Re: RE: st: RE: hausman test results
  • From: "Justina Fischer" <[email protected]>
• st: random effect unbalanced panel data useful?
  • From: Jan Lid <[email protected]>
• st: New Panel Time Series commands available from SSC
  • From: Markus Eberhardt <[email protected]>
• RE: st: RE: hausman test results
  • From: Jan Lid <[email protected]>
• Re: st: EGEN GROUP where order doesn't matter?
  • From: Nick Cox <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: Nick Cox <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: <[email protected]>
• Re: st: Interactions between tsset and sort
  • From: Scott Merryman <[email protected]>
• Re: st: Interactions between tsset and sort
  • From: Nick Cox <[email protected]>
• Re: st: working with dictionary
  • From: Nick Cox <[email protected]>
• Re: RE: st: RE: hausman test results
  • From: "Justina Fischer" <[email protected]>
• Re: st: EGEN GROUP where order doesn't matter?
  • From: Nick Cox <[email protected]>
• RE: st: RE: hausman test results
  • From: Jan Lid <[email protected]>
• Re: st: RE: CDF log-normal and histogram
  • From: Maarten buis <[email protected]>
• st: update postrcspline available from SSC
  • From: Maarten buis <[email protected]>
• st: Interactions between tsset and sort
  • From: Gordon Hughes <[email protected]>
• st: Variable labels in the variables window
  • From: Ari Dothan <[email protected]>
• st: From: Ari Dothan <[email protected]>
  • From: [email protected]
• RE: st: computation across rows
  • From: Hewan Belay <[email protected]>
• Re: st: Binary Choice Panel Data Model with Sample Selection.
  • From: Ippab <[email protected]>
• RE: st: computation across rows
  • From: "Sarah Edgington" <[email protected]>
• Re: st: computation across rows
  • From: Hewan Belay <[email protected]>
• st: panel VECM
  • From: Biljana Jonoska <[email protected]>
• st: Including left-censored data in survival model
  • From: Heidi <[email protected]>
• st: working with dictionary
  • From: Tharshini Thangavelu <[email protected]>
• st: Including left-censored data in survival model
  • From: Heidi <[email protected]>
• Re: st: EGEN GROUP where order doesn't matter?
  • From: Don Ruby <[email protected]>
• Re: st: RE: hausman test results
  • From: "Justina Fischer" <[email protected]>
• st: EGEN GROUP where order doesn't matter?
  • From: Don Ruby <[email protected]>
• st: RE: CDF log-normal and histogram
  • From: Nick Cox <[email protected]>
• st: CDF log-normal and histogram
  • From: Beatrice Crozza <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: Scott Merryman <[email protected]>
• Re: st: New version of oglm and oglm9 now available
  • From: Richard Williams <[email protected]>
• Re: st: -svmat- with matrix colnames based on factor variable names?
  • From: Austin Nichols <[email protected]>
• st: RE: hausman test results
  • From: DE SOUZA Eric <[email protected]>
• st: RE: -svmat- with matrix colnames based on factor variable names?
  • From: Nick Cox <[email protected]>
• Re: st: New version of oglm and oglm9 now available
  • From: Richard Williams <[email protected]>
• Re: st: New version of oglm and oglm9 now available
  • From: Philip Ender <[email protected]>
• st: New version of oglm and oglm9 now available
  • From: Richard Williams <[email protected]>
• st: hausman test results
  • From: Jan Lid <[email protected]>
• st: -svmat- with matrix colnames based on factor variable names?
  • From: <[email protected]>
• Re: Re: st: encode results in false match - merge/joinby
  • From: "Clyde Schechter" <[email protected]>
• Re: st: Kappa weights & category detection
  • From: James Kirkbride <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Binary Choice Panel Data Model with Sample Selection.
  • From: "Garrido, Melissa" <[email protected]>
• Antwort: Re: st: ado file installation from local computer
  • From: [email protected]
• RE: st: RE: STATA11.1 do editor
  • From: Nick Cox <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: ado file installation from local computer
  • From: Daniel Feenberg <[email protected]>
• Re: st: year-fixed effects in monthly panel
  • From: Maarten buis <[email protected]>
• st: ado file installation from local computer
  • From: [email protected]
• RE: st: RE: xtivreg
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: RE: STATA11.1 do editor
  • From: nigussie Tefera <[email protected]>
• Re: st: RE: From: ipianah nic <[email protected]>
  • From: Maarten buis <[email protected]>
• Re: st: RE: xtivreg
  • From: Lanciné Condé <[email protected]>
• Re: st: RE: From: ipianah nic <[email protected]>
  • From: ipianah nic <[email protected]>
• st: year-fixed effects in monthly panel
  • From: Abhimanyu Arora <[email protected]>
• RE: st: Suest with different estimators (logit & mlogit)
  • From: "Groot, de Carola" <[email protected]>
• st: RE: STATA11.1 do editor
  • From: Nick Cox <[email protected]>
• st: RE: From: ipianah nic <[email protected]>
  • From: Nick Cox <[email protected]>
• st: STATA11.1 do editor
  • From: nigussie Tefera <[email protected]>
• st: New version of -descsave- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: test of joint significance
  • From: Maarten buis <[email protected]>
• st: From: ipianah nic <[email protected]>
  • From: [email protected]
• Re: AW: RE: RE: st: Unit roots in non linear regression models
  • From: Syed Basher <[email protected]>
• Re: st: Suest with different estimators (logit & mlogit)
  • From: Maarten buis <[email protected]>
• Re: st: test of joint significance
  • From: Caterina Astarita <[email protected]>
• Re: st: Kappa weights & category detection
  • From: Ronan Conroy <[email protected]>
• RE: RE: RE: st: Unit roots in non linear regression models
  • From: Nick Cox <[email protected]>
• AW: RE: RE: st: Unit roots in non linear regression models
  • From: Johannes Muck <[email protected]>
• st: Suest with different estimators (logit & mlogit)
  • From: "carola.degroot" <[email protected]>
• st: Setting up a Kalman Filter on Stata 11
  • From: Radoslav Todorov <[email protected]>
• st: Binary Choice Panel Data Model with Sample Selection.
  • From: Ippab <[email protected]>
• Re: st: computation across rows
  • From: Nick Cox <[email protected]>
• Re: st: encode results in false match - merge/joinby
  • From: Nick Cox <[email protected]>
• Re: st: encode results in false match - merge/joinby
  • From: Richard Williams <[email protected]>
• re: re:st: pscore question
  • From: Alistair Windsor <[email protected]>
• Re: st: encode results in false match - merge/joinby
  • From: joe j <[email protected]>
• Re: st: encode results in false match - merge/joinby
  • From: Eric Booth <[email protected]>
• Re: st: encode results in false match - merge/joinby
  • From: Eric Booth <[email protected]>
• Re: st: stepwise and manual drop of variables
  • From: Rodrigo Briceño <[email protected]>
• Re: st: stepwise and manual drop of variables
  • From: Phil Clayton <[email protected]>
• Re: st: stepwise and manual drop of variables
  • From: Richard Williams <[email protected]>
• st: stepwise and manual drop of variables
  • From: Rodrigo Briceño <[email protected]>
• st: encode results in false match - merge/joinby
  • From: joe j <[email protected]>
• st: Kappa weights & category detection
  • From: James Kirkbride <[email protected]>
• st: computation across rows
  • From: Hewan Belay <[email protected]>
• st: xtmixed and treatreg
  • From: Adrianne Frech <[email protected]>
• Re: st: Question regarding metaregression
  • From: Austin Nichols <[email protected]>
• st: RE: RE: RE: puzzling string conversion
  • From: Nick Cox <[email protected]>
• st: RE: factor score option
  • From: Nick Cox <[email protected]>
• st: factor score option
  • From: Jet <[email protected]>
• st: RE: RE: puzzling string conversion
  • From: Nick Cox <[email protected]>
• st: RE: RE: puzzling string conversion
  • From: Nick Cox <[email protected]>
• RE: st: growth rate in panel data
  • From: Humaira Asad <[email protected]>
• Re: st: puzzling string conversion
  • From: Eric Booth <[email protected]>
• st: RE: puzzling string conversion
  • From: Nick Cox <[email protected]>
• st: marginal effects following xtmelogit and xtlogit
  • From: "Jason P. Kelly" <[email protected]>
• Re: st: splitting strings
  • From: Eric Booth <[email protected]>
• Re: st: RE: percentage format
  • From: Eric Booth <[email protected]>
• st: puzzling string conversion
  • From: Dimitri Szerman <[email protected]>
• Re: st: growth rate in panel data
  • From: Maarten buis <[email protected]>
• RE: st: RE: growth rate in panel data
  • From: DE SOUZA Eric <[email protected]>
• RE: st: RE: growth rate in panel data
  • From: Humaira Asad <[email protected]>
• st: RE: RE: growth rate in panel data
  • From: Nick Cox <[email protected]>
• st: RE: growth rate in panel data
  • From: Nick Cox <[email protected]>
• st: growth rate in panel data
  • From: Humaira Asad <[email protected]>
• Re: st: splitting strings
  • From: Scott Merryman <[email protected]>
• st: RE: splitting strings
  • From: Nick Cox <[email protected]>
• RE: st: date/time question
  • From: Nick Cox <[email protected]>
• Re: st: splitting strings
  • From: Daniel Henriksen <[email protected]>
• st: New package -fvprevar- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: RE: percentage format
  • From: Ronan Conroy <[email protected]>
• st: splitting strings
  • From: Daniel Henriksen <[email protected]>
• st: New version of -prodvars- on SSC
  • From: Roger Newson <[email protected]>
• st: New version of -bspline- on SSC
  • From: Roger Newson <[email protected]>
• st: RE: RE: Unit roots in non linear regression models
  • From: Nick Cox <[email protected]>
• Fwd: st: goodness of fit svy: probit
  • From: Bart van Rijsbergen <[email protected]>
• st: RE: Unit roots in non linear regression models
  • From: Nick Cox <[email protected]>
• Re: st: goodness of fit svy: probit
  • From: Maarten buis <[email protected]>
• st: Unit roots in non linear regression models
  • From: Johannes Muck <[email protected]>
• Re: st: goodness of fit svy: probit
  • From: Bart van Rijsbergen <[email protected]>
• Re: st: date/time question
  • From: Nick Cox <[email protected]>
• Re: st: date/time question
  • From: Nick Cox <[email protected]>
• st: date/time question
  • From: Dimitri Szerman <[email protected]>
• Re: st: RE: percentage format
  • From: Nick Cox <[email protected]>
• Re: st: goodness of fit svy: probit
  • From: Maarten buis <[email protected]>
• st: Question regarding metaregression
  • From: Chan Yoon <[email protected]>
• st: goodness of fit svy: probit
  • From: Bart van Rijsbergen <[email protected]>
• st: RE: percentage format
  • From: "Harry Comber" <[email protected]>
• Re: st: disturbance term - first order autoregressive
  • From: Johan Hellstrom <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: disturbance term - first order autoregressive
  • From: Johan Hellstrom <[email protected]>
• st: Update of khb on SSC
  • From: Ulrich Kohler <[email protected]>
• st: predict factor score
  • From: Jet <[email protected]>
• Re: st: Linking information from other family members
  • From: Quang Nguyen <[email protected]>
• Re: st: MODULE UPDATE: WBDATA renamed WBOPENDATA
  • From: JP Azevedo <[email protected]>
• st: STATA MODULE UPDATE: HOI - Human Opportunity Index
  • From: JP Azevedo <[email protected]>
• st: Re: Linking information from other family members
  • From: Quang Nguyen <[email protected]>
• st: Re: Linking information from other family members
  • From: Quang Nguyen <[email protected]>
• Re: st: xtmepoisson out of sample prediction error
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• st: xtmepoisson out of sample prediction error
  • From: Jibonayan Raychaudhuri <[email protected]>
• Re: st: MODULE UPDATE: WBDATA renamed WBOPENDATA
  • From: martine etienne <[email protected]>
• Re: Antwort: Re: Antwort: Re: st: Multicollinearity in panel data
  • From: Richard Williams <[email protected]>
• st: disturbance term - first order autoregressive
  • From: [email protected]
• Re: st: Linking information from other family members
  • From: Friedrich Huebler <[email protected]>
• Re: st: Special summarize
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Is multilevel model the correct model?
  • From: "Justina Fischer" <[email protected]>
• Re: st: Is multilevel model the correct model?
  • From: Marcello Pagano <[email protected]>
• st: memory allocation and infile
  • From: Jimmy Jin <[email protected]>
• Re: Antwort: Re: Antwort: Re: st: Multicollinearity in panel data
  • From: Maarten buis <[email protected]>
• RE: st: ICC in crossed effects models
  • From: "Cohen, Elan" <[email protected]>
• st: Antwort:
  • From: Justina Fischer <[email protected]>
• [no subject]
  • From: Unknown
• Antwort: Re: Antwort: Re: st: Multicollinearity in panel data
  • From: Justina Fischer <[email protected]>
• st: RE: RE: percentage format
  • From: Nick Cox <[email protected]>
• st: Special summarize
  • From: Punit Arora <[email protected]>
• st: test of joint significance
  • From: Caterina Astarita <[email protected]>
• [no subject]
  • From: Caterina Astarita <[email protected]>
• st: RE: percentage format
  • From: Nick Cox <[email protected]>
• Re: st: percentage format
  • From: Caleb Southworth <[email protected]>
• Re: Antwort: Re: st: Multicollinearity in panel data
  • From: Maarten buis <[email protected]>
• st: percentage format
  • From: "Harry Comber" <[email protected]>
• RE: st: count nr of countries
  • From: Nick Cox <[email protected]>
• Antwort: Re: st: Multicollinearity in panel data
  • From: Justina Fischer <[email protected]>
• Antwort: Re: st: Multicollinearity in panel data
  • From: Justina Fischer <[email protected]>
• Re: st: ICC in crossed effects models
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• Antwort: st: Coefficients in xtgls
  • From: Justina Fischer <[email protected]>
• Re: st: count nr of countries
  • From: "Justina Fischer" <[email protected]>
• re:st: pscore question
  • From: "Ariel Linden. DrPH" <[email protected]>
• st: count nr of countries
  • From: Tharshini Thangavelu <[email protected]>
• st: ICC in crossed effects models
  • From: "Cohen, Elan" <[email protected]>
• Re: st: pscore question
  • From: "Alistair Windsor (U of M)" <[email protected]>
• st: Coefficients in xtgls
  • From: jray2 <[email protected]>
• Re: st: Correctly setting FPC in svyset
  • From: Steven Samuels <[email protected]>
• st: Linking information from other family members
  • From: Quang Nguyen <[email protected]>
• st: Is multilevel model the correct model?
  • From: Shikha Sinha <[email protected]>
• RE: st: tab varname without the varname label
  • From: Nick Cox <[email protected]>
• Re: st: tab varname without the varname label
  • From: Svend Juul <[email protected]>
• st: RES: RE: RE: tab varname without the varname label
  • From: José Maria Pacheco de Souza <[email protected]>
• st: RE: RE: tab varname without the varname label
  • From: Nick Cox <[email protected]>
• Re: st: Multicollinearity in panel data
  • From: Maarten buis <[email protected]>
• st: Correctly setting FPC in svyset
  • From: R G <[email protected]>
• Re: st: Multicollinearity in panel data
  • From: Maarten buis <[email protected]>
• st: RE: tab varname without the varname label
  • From: Nick Cox <[email protected]>
• st: mds plot adding reference questions
  • From: [email protected]
• Re: st: Multicollinearity in panel data
  • From: "Jing Zhou" <[email protected]>
• st: tab varname without the varname label
  • From: José Maria Pacheco de Souza <[email protected]>
• Re: st: Multicollinearity in panel data
  • From: Maarten buis <[email protected]>
• Re:Re:st:Stata and survey data
  • From: Maarten buis <[email protected]>
• Re: st: Mata - generalised cross products of the form X'SX
  • From: Gordon Hughes <[email protected]>
• Re: st: Sample size calculation under poisson distribution
  • From: Ronan Conroy <[email protected]>
• Re:Re:st:STATA and survey data
  • From: Ronald McDowell <[email protected]>
• Re: st: Multicollinearity in panel data
  • From: Johan Hellstrom <[email protected]>
• Re: st: epiconf: counfounding
  • From: Svend Juul <[email protected]>
• Antwort: Re: st: Non-linear regression: interpretation
  • From: Justina Fischer <[email protected]>
• Re: st: Loop question II
  • From: Nick Cox <[email protected]>
• Re: st: Loop question II
  • From: Alberto R Osella <[email protected]>
• st: Multicollinearity in panel data
  • From: "Jing Zhou" <[email protected]>
• Re: st: Loop question II
  • From: Tirthankar Chakravarty <[email protected]>
• st: Loop question II
  • From: Alberto R Osella <[email protected]>
• RE: st: RE: pscore question
  • From: Jan Bryla <[email protected]>
• st: Fixed effect and IV together for binary dependent variable
  • From: "Harpreet SIngh" <[email protected]>
• Re: st: Selection with an endogenous ordinal variable
  • From: Filipe Silva <[email protected]>
• Re: st: Selection with an endogenous ordinal variable
  • From: Austin Nichols <[email protected]>
• Re: st: Selection with an endogenous ordinal variable
  • From: Filipe Silva <[email protected]>
• Re: st: collecting tabulate results
  • From: Nick Cox <[email protected]>
• Re: st: Non-linear regression: interpretation
  • From: Daniel Feenberg <[email protected]>
• Re: st: Non-linear regression: interpretation
  • From: "Justina Fischer" <[email protected]>
• st: Non-linear regression: interpretation
  • From: David Greenberg <[email protected]>
• st: RE: Suppressing Select Coefficients
  • From: Nick Cox <[email protected]>
• Re: st: is Stata 11 32 bit certified / supported / working on windows 7 64 bit?
  • From: roland andersson <[email protected]>
• Re: st: is Stata 11 32 bit certified / supported / working on windows 7 64 bit?
  • From: Alan Riley <[email protected]>
• st: Suppressing Select Coefficients
  • From: "Wright, Brad" <[email protected]>
• st: graphing predicted probabilities with quadratics
  • From: David Torres <[email protected]>
• Re: st: RE: pscore question
  • From: Nick Cox <[email protected]>
• Re: st: Separate intercept mixed model
  • From: "Michael N. Mitchell" <[email protected]>
• Re: st: Separate intercept mixed model
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• st: RE: pscore question
  • From: Jan Bryla <[email protected]>
• Re: st: re: egen with error after set obs erases obs
  • From: Nick Cox <[email protected]>
• Re: st: collecting tabulate results
  • From: Nick Cox <[email protected]>
• st: re: egen with error after set obs erases obs
  • From: "Airey, David C" <[email protected]>
• Re: st: re: egen with error after set obs erases obs
  • From: Nick Cox <[email protected]>
• Re: st: collecting tabulate results
  • From: Nick Cox <[email protected]>
• Re: st: collecting tabulate results
  • From: Eric Booth <[email protected]>
• st: MODULE UPDATE: WBDATA renamed WBOPENDATA
  • From: JP Azevedo <[email protected]>
• Re: st: re: egen with error after set obs erases obs
  • From: Nick Cox <[email protected]>
• Re: st: re: egen with error after set obs erases obs
  • From: Andrew Dyck <[email protected]>
• st: pscore question
  • From: Dan Kimmel <[email protected]>
• st: predicted probabilities and marginal effects after xtmelogit and xtlogit
  • From: "Jason P. Kelly" <[email protected]>
• st: collecting tabulate results
  • From: "Broudy, David, DOH" <[email protected]>
• Re: st: is Stata 11 32 bit certified / supported / working on windows 7 64 bit?
  • From: roland andersson <[email protected]>
• st: re: egen with error after set obs erases obs
  • From: "Airey, David C" <[email protected]>
• st: Rank ordered logit
  • From: "Mendieta Umana, Maria Paula" <[email protected]>
• st: MDS in stata 10
  • From: [email protected]
• Re: Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• Re: Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Austin Nichols <[email protected]>
• Re: st: Selection with an endogenous ordinal variable
  • From: Austin Nichols <[email protected]>
• Re: st: Mata - generalised cross products of the form X'SX
  • From: [email protected] (William Gould, StataCorp LP)
• st: RE: egen with error after set obs erases obs
  • From: Nick Cox <[email protected]>
• Re: st: is Stata 11 32 bit certified / supported / working on windows 7 64 bit?
  • From: Alan Riley <[email protected]>
• Re: Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Filipe Silva <[email protected]>
• st: egen with error after set obs erases obs
  • From: "Airey, David C" <[email protected]>
• Re: Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• Re: st: Mata - generalised cross products of the form X'SX
  • From: David Kantor <[email protected]>
• RE: Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: "Schaffer, Mark E" <[email protected]>
• st: Mata - generalised cross products of the form X'SX
  • From: Gordon Hughes <[email protected]>
• st: COURSE: Practical use of multiple imputation to handle missing data
  • From: Nick Cox <[email protected]>
• Re: st: Non-linear regression
  • From: Daniel Feenberg <[email protected]>
• st: Sample size calculation under poisson distribution
  • From: Munyaradzi Dimairo <[email protected]>
• Re: st: Time-splitting problem
  • From: Morten Støver <[email protected]>
• Re: st: Time-splitting problem
  • From: Maarten buis <[email protected]>
• st: Selection with an endogenous ordinal variable
  • From: Filipe Silva <[email protected]>
• Re: Re: Re: st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• Re: Re: Re: st: xtivreg2 with endogenous binary regressors
  • From: Filipe Silva <[email protected]>
• st: Time-splitting problem
  • From: Morten Støver <[email protected]>
• st: testing for differences in efficiency with clogit
  • From: Karin <[email protected]>
• Antwort: Re: Re: st: xtivreg2 with endogenous binary regressors
  • From: Justina Fischer <[email protected]>
• Re: Re: st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• Re: st: Separate intercept mixed model
  • From: Maarten buis <[email protected]>
• Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Justina Fischer <[email protected]>
• Re: st: RE: Loop question
  • From: Alberto R Osella <[email protected]>
• Re: st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• Antwort: Re: st: xtivreg2 with endogenous binary regressors
  • From: Justina Fischer <[email protected]>
• st: RE: Loop question
  • From: Nick Cox <[email protected]>
• Re: st: Non-linear regression
  • From: Maarten buis <[email protected]>
• st: RE: Non-linear regression
  • From: Nick Cox <[email protected]>
• Re: st: xtivreg2 with endogenous binary regressors
  • From: Filipe Silva <[email protected]>
• Antwort: st: xtivreg2 with endogenous binary regressors
  • From: Justina Fischer <[email protected]>
• RE: st: epiconf: counfounding
  • From: Nick Cox <[email protected]>
• st: RE: Loop question
  • From: Nick Cox <[email protected]>
• st: xtivreg2 with endogenous binary regressors
  • From: Javier Pérez <[email protected]>
• st: Loop question
  • From: Alberto R Osella <[email protected]>
• st: Separate intercept mixed model
  • From: Michael Mitchell <[email protected]>
• st: Non-linear regression
  • From: "Hamizah Hassan" <[email protected]>
• Re: st: epiconf: counfounding
  • From: SR Millis <[email protected]>
• Re: st: Heckprob problems
  • From: Qing Gong Yang <[email protected]>
• Re: st: Heckprob problems
  • From: "Fernando Rios Avila" <[email protected]>
• Re: st: Heckprob problems
  • From: Qing Gong Yang <[email protected]>
• Re: st: epiconf: counfounding
  • From: Nick Cox <[email protected]>
• Re: st: Dealing with an unusual peak in time-series data
  • From: Jung-eun Lee <[email protected]>
• Re: st: Heckprob problems
  • From: "Fernando Rios Avila" <[email protected]>
• st: Heckprob problems
  • From: Qing Gong Yang <[email protected]>
• Re: st: Re: Comparison of results from Stata
  • From: Matthew J Baker <[email protected]>
• st: epiconf: counfounding
  • From: SR Millis <[email protected]>
• st: is Stata 11 32 bit certified / supported / working on windows 7 64 bit?
  • From: Andrea Monti <[email protected]>
• st: RE: Generating predicted values from XTPCSE estimates
  • From: Nick Cox <[email protected]>
• st: Generating predicted values from XTPCSE estimates
  • From: Kevin Wolff <[email protected]>
• Re: st: Mata performance monitoring
  • From: [email protected] (William Gould, StataCorp LP)
• st: RE: Cumulative Distribution Function (CDF)
  • From: Nick Cox <[email protected]>
• st: Cumulative Distribution Function (CDF)
  • From: [email protected]
• st: Mata performance monitoring
  • From: Gordon Hughes <[email protected]>
• Re: st: Re: Comparison of results from Stata
  • From: [email protected] (William Gould, StataCorp LP)
• Re: st: bootstrap saving option
  • From: Steven Samuels <[email protected]>
• st: RE: MATA function that gives the TRUE indices of a logical object
  • From: Nick Cox <[email protected]>
• st: Re: statalist-digest V4 #4057
  • From: "Alistair Windsor (U of M)" <[email protected]>
• st: MATA function that gives the TRUE indices of a logical object
  • From: [email protected]
• st: Simultaneous equations & Panel data
  • From: Steve J <[email protected]>
• RE: st: rename middle parts of variables
  • From: Nick Cox <[email protected]>
• Re: st: bootstrap saving option
  • From: Liwu <[email protected]>
• RE: st: rename middle parts of variables
  • From: Nick Cox <[email protected]>
• re: st: xtivreg(2)
  • From: Christopher F Baum <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Steven Samuels <[email protected]>
• Re: st: rename middle parts of variables
  • From: Hewan Belay <[email protected]>
• Re: st: rename middle parts of variables
  • From: Richard Goldstein <[email protected]>
• st: rename middle parts of variables
  • From: Hewan Belay <[email protected]>
• st: RE: xtivreg
  • From: "Schaffer, Mark E" <[email protected]>
• st: 9th German Stata Users Group Meeting: Call for Papers
  • From: Ulrich Kohler <[email protected]>
• st: xtivreg
  • From: Lanciné Condé <[email protected]>
• RE: st: Bubble graph line style question
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: changes of user-input by -bootstrap- and -permute-
  • From: Nick Cox <[email protected]>
• st: changes of user-input by -bootstrap- and -permute-
  • From: Ulrich Kohler <[email protected]>
• Re: st: Bubble graph line style question
  • From: Maarten buis <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: survey bootstrap
  • From: Steven Samuels <[email protected]>
• RE: st: survey bootstrap
  • From: Jun Xu <[email protected]>
• re: Re: st: Re: Comparison of results from Stata
  • From: Christopher Baum <[email protected]>
• st: Bubble graph line style question
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Re: Comparison of results from Stata and Mata
  • From: Matthew J Baker <[email protected]>
• Re: st: StatTransfer Questions
  • From: Eric Booth <[email protected]>
• Re: st: StatTransfer Questions
  • From: Eric Booth <[email protected]>
• st: StatTransfer Questions
  • From: Caleb Southworth <[email protected]>
• R: st: re: rollreg module
  • From: "[email protected]" <[email protected]>
• Re: st: legends after sts graph and addplot
  • From: Nick Cox <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Richard Williams <[email protected]>
• Re: st: legends after sts graph and addplot
  • From: Nick Cox <[email protected]>
• Re: st: bootstrap saving option
  • From: Steven Samuels <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Steven Samuels <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: bootstrap saving option
  • From: Steven Samuels <[email protected]>
• st: legends after sts graph and addplot
  • From: <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Steven Samuels <[email protected]>
• Re: st: bootstrap saving option
  • From: Liwu <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Shige Song <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Steven Samuels <[email protected]>
• Re: st: Obtaining 95%CI for marginal effect
  • From: Steven Samuels <[email protected]>
• st: Obtaining 95%CI for marginal effect
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: Interpreting summarize, detail
  • From: Syed Basher <[email protected]>
• Re: st: Interpreting summarize, detail
  • From: Phil Clayton <[email protected]>
• st: Interpreting summarize, detail
  • From: Syed Basher <[email protected]>
• Re: st: survey bootstrap
  • From: Steven Samuels <[email protected]>
• st: re: rollreg module
  • From: Christopher Baum <[email protected]>
• st: survey bootstrap
  • From: Jun Xu <[email protected]>
• Re: st: bootstrap saving option
  • From: Steven Samuels <[email protected]>
• st: rollreg module
  • From: "[email protected]" <[email protected]>
• Re: st: bootstrap saving option
  • From: Steven Samuels <[email protected]>
• Re: st: Comparing bootstrapped estimates across two models
  • From: Steven Samuels <[email protected]>
• Re: st: RE: download a file from a secure website
  • From: Nick cox <[email protected]>
• Re: st: Serial Correlation
  • From: Gordon Hughes <[email protected]>
• RE: st: RE: RE: Reshaping data
  • From: DE SOUZA Eric <[email protected]>
• st: RE: How to read a very old SPSS file?
  • From: "John Sandberg, Prof." <[email protected]>
• st: How to read a very old SPSS file?
  • From: <[email protected]>
• Re: st: horizontal bar graph with confidence interval
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: horizontal bar graph with confidence interval
  • From: Phil Clayton <[email protected]>
• Re: st: horizontal bar graph with confidence interval
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: horizontal bar graph with confidence interval
  • From: Phil Clayton <[email protected]>
• st: horizontal bar graph with confidence interval
  • From: Nur Hafidha Hikmayani <[email protected]>
• Re: st: How to read a very old SPSS file?
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Identify Person in a rotating panel
  • From: Steven Samuels <[email protected]>
• st: bootstrap saving option
  • From: Liwu <[email protected]>
• Re: st: How to read a very old SPSS file?
  • From: "Michael N. Mitchell" <[email protected]>
• RE: st: confidence intervals for median differences
  • From: "Seidel, Kristy D" <[email protected]>
• st: censored probit with multinomial and ordered outcomes
  • From: David Quinn <[email protected]>
• RE: st: RE: Weathr package on SSC
  • From: "Buzz Burhans" <[email protected]>
• Re: st: RE: RE: Reshaping data
  • From: Phil Clayton <[email protected]>
• st: How to read a very old SPSS file?
  • From: <[email protected]>
• Re: st: confidence intervals for median differences
  • From: Tirthankar Chakravarty <[email protected]>
• st: Forecasting for regression with differences and lags
  • From: José Luis Chávez Calva <[email protected]>
• st: confidence intervals for median differences
  • From: "Seidel, Kristy D" <[email protected]>
• st: System GMM line
  • From: Francesco Grigoli <[email protected]>
• Re: st: RE: Weathr package on SSC
  • From: Neal Caren <[email protected]>
• Re: st: Weathr package on SSC
  • From: Neal Caren <[email protected]>
• st: need help with postestimation graphing
  • From: David Torres <[email protected]>
• st: RE: Serial Correlation
  • From: DE SOUZA Eric <[email protected]>
• st: Stacking beta coefficients from multiple models
  • From: "Weichle, Thomas" <[email protected]>
• Re: st: RE: download a file from a secure website
  • From: Phil Schumm <[email protected]>
• Re: st: How do I graph interactions after logit model?
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: RE: download a file from a secure website
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: download a file from a secure website
  • From: Andrew Dyck <[email protected]>
• st: RE: download a file from a secure website
  • From: Nick Cox <[email protected]>
• st: download a file from a secure website
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: How do I graph interactions after logit model?
  • From: David Torres <[email protected]>
• st: RE: Identify Person in a rotating panel
  • From: Nick Cox <[email protected]>
• st: RE: Weathr package on SSC
  • From: "Buzz Burhans" <[email protected]>
• st: Identify Person in a rotating panel
  • From: "Ulrich Brandt" <[email protected]>
• st: RE: importing multiple text files
  • From: Nick Cox <[email protected]>
• st: RE: RE: importing multiple text files
  • From: Eric Booth <[email protected]>
• Re: st: Serial Correlation
  • From: Gabriel Nicolás Michelena <[email protected]>
• st: RE: importing multiple text files
  • From: Eric Booth <[email protected]>
• Re: st: Assign highest value per group to all members of that group
  • From: Richard Goldstein <[email protected]>
• Re: st: Serial Correlation
  • From: Syed Basher <[email protected]>
• st: importing multiple text files
  • From: "Harry Comber" <[email protected]>
• st: RE: Assign highest value per group to all members of that group
  • From: Nick Cox <[email protected]>
• st: Comparing bootstrapped estimates across two models
  • From: Matthew Wibbenmeyer <[email protected]>
• st: Assign highest value per group to all members of that group
  • From: Owen Corrigan <[email protected]>
• Re: st: SPLINE commands
  • From: Roger Newson <[email protected]>
• st: update proprcspline available from SSC
  • From: Maarten buis <[email protected]>
• RE: st: sequence of random values is repeated as I re-run code
  • From: "Prado De Castro Alfaiate, Jorge" <[email protected]>
• RE: st: SPLINE commands
  • From: Maarten buis <[email protected]>
• [no subject]
  • From: Unknown
• st: Re: Comparison of results from Stata and Mata
  • From: [email protected] (William Gould, StataCorp LP)
• st: building matrices for frequency and univariate/multivariate OR tables
  • From: ann montgomery <[email protected]>
• RE: st: RE: RE: Reshaping data
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Weathr package on SSC
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: SPLINE commands
  • From: Nick Cox <[email protected]>
• st: Serial Correlation
  • From: Robert Mills <[email protected]>
• st: Weathr package on SSC
  • From: Neal Caren <[email protected]>
• st: RE: Making Kernel Density Graphs
  • From: Nick Cox <[email protected]>
• Re: st: SPLINE commands
  • From: Roger Newson <[email protected]>
• Re: st: RE: RE: Reshaping data
  • From: Neil Shephard <[email protected]>
• st: RE: outreg2 Question
  • From: Nick Cox <[email protected]>
• st: outreg2 Question
  • From: Stephen Amrock <[email protected]>
• Re: st: Making Kernel Density Graphs
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: SPLINE commands
  • From: Ronald McDowell <[email protected]>
• st: Making Kernel Density Graphs
  • From: ajjee <[email protected]>
• RE: RE: RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• st: xtivreg2
  • From: natasha agarwal <[email protected]>
• Re: RE: RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: [email protected]
• RE: st: sequence of random values is repeated as I re-run code
  • From: Nick Cox <[email protected]>
• st: Corrected posting of SSC Archive activity, Jan _2011_
  • From: Christopher Baum <[email protected]>
• st: Re: Using margins
  • From: Arti Rayit <[email protected]>
• st: discrepancy predicted errors and mata computation [was: ""]
  • From: Maarten buis <[email protected]>
• st: RE: RE: RE: Reshaping data
  • From: Nick Cox <[email protected]>
• st: calculating interval scores for a new sample when item and threshold parameters are known
  • From: "Michiel de Boer" <[email protected]>
• RE: st: sequence of random values is repeated as I re-run code
  • From: "Prado De Castro Alfaiate, Jorge" <[email protected]>
• Re: Re: re:Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Christopher Baum <[email protected]>
• RE: st: RE: Control of format in output of commands?
  • From: Nick Cox <[email protected]>
• RE: st: Reshaping data
  • From: DE SOUZA Eric <[email protected]>
• st: RE: RE: Reshaping data
  • From: DE SOUZA Eric <[email protected]>
• [no subject]
  • From: Matthew J Baker <[email protected]>
• Re: st: undergraduate statistics text with Stata data (social science)
  • From: Christopher Baum <[email protected]>
• Re: st: RE: Control of format in output of commands?
  • From: Christopher Baum <[email protected]>
• RE: st: adjust to the inflation level
  • From: Nick Cox <[email protected]>
• RE: st: sequence of random values is repeated as I re-run code
  • From: Nick Cox <[email protected]>
• st: Imputing categorical and continuous variables simultaneously
  • From: Mosi Ifatunji <[email protected]>
• Re: st: adjust to the inflation level
  • From: Daniel Feenberg <[email protected]>
• RE: RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• Re: st: sequence of random values is repeated as I re-run code
  • From: Sergiy Radyakin <[email protected]>
• RE: RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: [email protected]
• RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• st: adjust to the inflation level
  • From: Tharshini Thangavelu <[email protected]>
• RE: st: RE: RE: Calculating moving windows over time with conditions
  • From: [email protected]
• st: RE: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• st: RE: Beta coefficients and Robust Cluster
  • From: Nick Cox <[email protected]>
• st: RE: Reshaping data
  • From: Nick Cox <[email protected]>
• Re: st: Reshaping data
  • From: Neil Shephard <[email protected]>
• st: Beta coefficients and Robust Cluster
  • From: Claude Francoeur <[email protected]>
• st: Reshaping data
  • From: DE SOUZA Eric <[email protected]>
• st: RE: Calculating moving windows over time with conditions
  • From: Nick Cox <[email protected]>
• st: RE: sequence of random values is repeated as I re-run code
  • From: Nick Cox <[email protected]>
• Antwort: st: Calculating moving windows over time with conditions
  • From: Johannes Geyer <[email protected]>
• Re: st:ODDSRISK module and continous covariates
  • From: Ronan Conroy <[email protected]>
• st: sequence of random values is repeated as I re-run code
  • From: "Prado De Castro Alfaiate, Jorge" <[email protected]>
• st: Calculating moving windows over time with conditions
  • From: [email protected]
• st: UK Stata User Group meeting 2011: first call for presentations
  • From: <[email protected]>
• Re: st: Change reference group in logistic regression
  • From: Neil Shephard <[email protected]>
• Re: st: Change reference group in logistic regression
  • From: Morten Støver <[email protected]>
• st:ODDSRISK module and continous covariates
  • From: Nanlesta Pilgrim <[email protected]>
• Re: st: code folding possible in Mac for Stata11 do-file editor?
  • From: Eric Booth <[email protected]>
• Re: st: re: Cumulative Accuracy Profile
  • From: Drosophilia Melanogaster <[email protected]>
• Re: st: Landmark analysis
  • From: Steven Samuels <[email protected]>
• Re: st: re: Cumulative Accuracy Profile
  • From: "Joseph Coveney" <[email protected]>
• st: code folding possible in Mac for Stata11 do-file editor?
  • From: ann montgomery <[email protected]>
• RE: st: re: Cumulative Accuracy Profile
  • From: Drosophilia Melanogaster <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: "Michael Palmer" <[email protected]>
• Re: re:Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Robert A Yaffee <[email protected]>
• st: outreg2 - problem with asterisks indicating significance levels
  • From: [email protected]
• Re: Antwort: st: passing single left-quotes to latex via -texdoc-
  • From: Eric Booth <[email protected]>
• Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: JP Azevedo <[email protected]>
• Re: Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: JP Azevedo <[email protected]>
• re:Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Richard Williams <[email protected]>
• Re: st: Landmark analysis
  • From: Sripal Kumar <[email protected]>
• re:Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Christopher Baum <[email protected]>
• Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Austin Nichols <[email protected]>
• Re: st: RE: NEW MODULE: wbdata - World Bank Data Bases
  • From: Nick Cox <[email protected]>
• Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: JP Azevedo <[email protected]>
• st: -devnplot- available from SSC
  • From: Nick Cox <[email protected]>
• st: RE: NEW MODULE: wbdata - World Bank Data Bases
  • From: "Morrison, Dr. Michael" <[email protected]>
• Re: st: RE: NEW MODULE: wbdata - World Bank Data Bases
  • From: JP Azevedo <[email protected]>
• Antwort: st: passing single left-quotes to latex via -texdoc-
  • From: Johannes Geyer <[email protected]>
• Re: st: NEW MODULE: wbdata - World Bank Data Bases
  • From: Andrew Dyck <[email protected]>
• st: NEW MODULE: wbdata - World Bank Data Bases
  • From: JP Azevedo <[email protected]>
• Re: st: continuing a loop from after it encounters an error
  • From: Nick Mosely <[email protected]>
• RE: st: continuing a loop from after it encounters an error
  • From: Nick Cox <[email protected]>
• st: SSC Archive activity, January 2011
  • From: Christopher Baum <[email protected]>
• Antwort: st: passing single left-quotes to latex via -texdoc-
  • From: Johannes Geyer <[email protected]>
• st: RE: Control of format in output of commands?
  • From: Nick Cox <[email protected]>
• RE: st: continuing a loop from after it encounters an error
  • From: Nick Cox <[email protected]>
• Re: st: Change reference group in logistic regression
  • From: "Michael N. Mitchell" <[email protected]>
• Re: st: RE: continuing a loop from after it encounters an error
  • From: Nick Mosely <[email protected]>
• Re: st: continuing a loop from after it encounters an error
  • From: Nick Mosely <[email protected]>
• st: Control of format in output of commands?
  • From: Art Burke <[email protected]>
• st: RE: continuing a loop from after it encounters an error
  • From: Nick Cox <[email protected]>
• Re: st: RE: error 109
  • From: Natalia Batista <[email protected]>
• Re: st: error 109
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: RE: error 109
  • From: Nick Cox <[email protected]>
• st: Exceeding maxvar in nested anova estimation
  • From: "Wissoker, Doug" <[email protected]>
• st: error 109
  • From: Natalia Batista <[email protected]>
• Re: st: continuing a loop from after it encounters an error
  • From: Eric Booth <[email protected]>
• st: continuing a loop from after it encounters an error
  • From: Nick Mosely <[email protected]>
• st: Course Reminder: Microeconometrics with Stata
  • From: Ashley Dyer <[email protected]>
• RE: st: Creating all permutations of ten variables
  • From: Nick Cox <[email protected]>
• Re: Antwort: st: passing single left-quotes to latex via -texdoc-
  • From: Eric Booth <[email protected]>
• Re: st: Dealing with an unusual peak in time-series data
  • From: Ronan Conroy <[email protected]>
• st: Dealing with an unusual peak in time-series data
  • From: Jung-eun Lee <[email protected]>
• Antwort: st: passing single left-quotes to latex via -texdoc-
  • From: Richard Ochmann <[email protected]>
• Re: st: comparing nested models
  • From: Neil Shephard <[email protected]>
• st: passing single left-quotes to latex via -texdoc-
  • From: Eric Booth <[email protected]>
• Re: st: comparing nested models
  • From: Austin Nichols <[email protected]>
• Re: st: Creating all permutations of ten variables
  • From: Phil Schumm <[email protected]>
• st: Creating all permutations of ten variables
  • From: Mark McCann <[email protected]>
• Re: st: comparing nested models
  • From: Neil Shephard <[email protected]>
• Re: st: comparing nested models
  • From: Austin Nichols <[email protected]>
• st: RE: comparing nested models
  • From: Susan Bondy <[email protected]>
• st: comparing nested models
  • From: Nikolas Asasa <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Eric Booth <[email protected]>
• Re: st: Landmark analysis
  • From: Steven Samuels <[email protected]>
• RE: st: SPLINE commands
  • From: Nick Cox <[email protected]>
• Re: st: Lrtest and lrdrop1
  • From: Richard Williams <[email protected]>
• RE: st: re: Cumulative Accuracy Profile
  • From: Nick Cox <[email protected]>
• Re: st: undergraduate statistics text with Stata data (social science)
  • From: "P. Praeg" <[email protected]>
• Re: st: undergraduate statistics text with Stata data (social science)
  • From: Maarten buis <[email protected]>
• Re: st: Re: Cox regression - model comparison
  • From: Janet Hill <[email protected]>
• Re: st: Re: Cox regression - model comparison
  • From: Maarten buis <[email protected]>
• Re: st: Change reference group in logistic regression
  • From: Maarten buis <[email protected]>
• st: AW: Change reference group in logistic regression
  • From: "Kaulisch, Marc" <[email protected]>
• st: undergraduate statistics text with Stata data (social science)
  • From: Doug Hess <[email protected]>
• st: Change reference group in logistic regression
  • From: Morten Støver <[email protected]>
• st: Re: Cox regression - model comparison
  • From: Janet Hill <[email protected]>
• Re: st: re: Cumulative Accuracy Profile
  • From: Jose Ricardo Nogueira <[email protected]>
• Re: st: SPLINE commands
  • From: Maarten buis <[email protected]>
• Re: Re: st: STATA and survey data
  • From: Ronald McDowell <[email protected]>
• st: SPLINE commands
  • From: Ronald McDowell <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: "Seed, Paul" <[email protected]>
• Re: st: Stata Installation Qualification Tool
  • From: Hiroyuki Kawakatsu <[email protected]>
• Re: st: re: Cumulative Accuracy Profile
  • From: Nick Cox <[email protected]>
• Re: st: re: Cumulative Accuracy Profile
  • From: Nick Cox <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: Maarten buis <[email protected]>
• Re: st: odbc connectivity
  • From: Abhimanyu Arora <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: "Michael Palmer" <[email protected]>
• st: re: Cumulative Accuracy Profile
  • From: Drosophilia Melanogaster <[email protected]>
• st: Stata Installation Qualification Tool
  • From: Sergiy Radyakin <[email protected]>
• st: Durbin-Wu-Hausman convergence problem
  • From: Mike Pesko <[email protected]>
• Re: st: Stata 11 64-bit no longer runs my profile.do automatically
  • From: John LeBlanc <[email protected]>
• RE: st: RE: RE: CATPLOT and "ytitle" option
  • From: "David Radwin" <[email protected]>
• Re: st: RE: RE: CATPLOT and "ytitle" option
  • From: Nick Cox <[email protected]>
• st: RE: RE: CATPLOT and "ytitle" option
  • From: Lucie Vlach <[email protected]>
• st: RE: CATPLOT and "ytitle" option
  • From: "David Radwin" <[email protected]>
• st: RE: Hyperbola in Stata
  • From: "Cohen, Elan" <[email protected]>
• st: Hyperbola in Stata
  • From: Etan Lakam <[email protected]>
• Re: st: Stata 11 64-bit no longer runs my profile.do automatically
  • From: Jeph Herrin <[email protected]>
• Re: st: suppressing covariates in regression outputs
  • From: Tim Wade <[email protected]>
• st: CATPLOT and "ytitle" option
  • From: Lucie Vlach <[email protected]>
• st: suppressing covariates in regression outputs
  • From: Nathan Hutto <[email protected]>
• st: margins postestimation with random effects and offsets
  • From: Susan Bondy <[email protected]>
• Re: st: Stata 11 64-bit no longer runs my profile.do automatically
  • From: Gary Longton <[email protected]>
• Re: st: error with sccendif
  • From: Wassim Tarraf <[email protected]>
• RE: st: RE: recoding variables with different min & max into standard scale
  • From: Nick Cox <[email protected]>
• RE: st: Filtering methods with short time series
  • From: Nick Cox <[email protected]>
• RE: st: Filtering methods with short time series
  • From: kokootchke <[email protected]>
• Re: st: RE: recoding variables with different min & max into standard scale
  • From: Daniel Laurison <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Eric Booth <[email protected]>
• RE: st: foreach global macro not working with multiple macros
  • From: Nick Cox <[email protected]>
• st: RE: recoding variables with different min & max into standard scale
  • From: Nick Cox <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Nick Mosely <[email protected]>
• st: recoding variables with different min & max into standard scale
  • From: Daniel Laurison <[email protected]>
• st: Stata 11 64-bit no longer runs my profile.do automatically
  • From: John LeBlanc <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Eric Booth <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Eric Booth <[email protected]>
• Re: st: RE: Fwd: Moving value labels from one database to another
  • From: Eric Booth <[email protected]>
• Re: st: RE: Fwd: Moving value labels from one database to another
  • From: Nick Mosely <[email protected]>
• Re: st: foreach global macro not working with multiple macros
  • From: Maarten buis <[email protected]>
• RE: st: obtaining R squared after xtabond
  • From: Nick Cox <[email protected]>
• st: RE: Fwd: Moving value labels from one database to another
  • From: Susan Bondy <[email protected]>
• st: foreach global macro not working with multiple macros
  • From: Nick Mosely <[email protected]>
• st: Fwd: Moving value labels from one database to another
  • From: Nick Mosely <[email protected]>
• Re: st: obtaining R squared after xtabond
  • From: Anastasiya Zavyalova <[email protected]>
• st: RE: -probit- does not converge, but does -dprobit-
  • From: Nick Cox <[email protected]>
• st: -probit- does not converge, but does -dprobit-
  • From: Duha Altindag <[email protected]>
• st: estimated rates and confidence intervals from stata count models
  • From: Susan Bondy <[email protected]>
• Re: st: Richard Sperling
  • From: [email protected] (William Gould, StataCorp LP)
• RE: st: FW: Marginal effects for the two-part model
  • From: Maarten buis <[email protected]>
• Re: st: a simple question
  • From: Sergiy Radyakin <[email protected]>
• st: a simple question
  • From: Ricardo Castro <[email protected]>
• Re: st: Breaks in ordered probit model
  • From: Maarten buis <[email protected]>
• Re: st: STATA and survey data
  • From: Steven Samuels <[email protected]>
• Re: st: Breaks in ordered probit model
  • From: Erik Berwart <[email protected]>
• Re: st: error with sccendif
  • From: Roger Newson <[email protected]>
• RE: st: pweights in xtiles command are doing the opposite of what I expect them to do
  • From: Nick Cox <[email protected]>
• Re: st: pweights in xtiles command are doing the opposite of what I expect them to do
  • From: Michael Boehm <[email protected]>
• RE: st: Filtering methods with short time series
  • From: Nick Cox <[email protected]>
• st: RE: Reformatting all dates in a Stata dataset
  • From: Nick Cox <[email protected]>
• st: Reformatting all dates in a Stata dataset
  • From: "James Morden" <[email protected]>
• Re: st: Confirm existence of a variable(s) with wildcards in the variable name
  • From: Nick Cox <[email protected]>
• st: STATA and survey data
  • From: Ronald McDowell <[email protected]>
• Re: st: obtaining R squared after xtabond
  • From: Nick Cox <[email protected]>
• st: Lrtest and lrdrop1
  • From: Garry Anderson <[email protected]>
• Re: st: Confirm existence of a variable(s) with wildcards in the variable name
  • From: Nick Cox <[email protected]>
• Re: st: Fwd: accessing stored values after streg estimation
  • From: Maarten buis <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: Maarten buis <[email protected]>
• Re: st: Good spatial manual
  • From: Natalie Trapp <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: "Michael Palmer" <[email protected]>
• re: st: Richard Sperling
  • From: "Airey, David C" <[email protected]>
• Re: st: pweights in xtiles command are doing the opposite of what I expect them to do
  • From: Steven Samuels <[email protected]>
• Re: st: Table from loop
  • From: Kye Lippold <[email protected]>
• st: Richard Sperling
  • From: Christopher Baum <[email protected]>
• Re: st: Confirm existence of a variable(s) with wildcards in the variable name
  • From: Eric Booth <[email protected]>
• RE: st: Filtering methods with short time series
  • From: kokootchke <[email protected]>
• st: Confirm existence of a variable(s) with wildcards in the variable name
  • From: Will Probert <[email protected]>
• st: obtaining R squared after xtabond
  • From: Anastasiya Zavyalova <[email protected]>
• st: New Stata command truernd()
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Tracking Replacements Made to Variables
  • From: Christopher Lanoue <[email protected]>
• Re: st: RE: Regressions with combinatorial of variables
  • From: Nick Cox <[email protected]>
• st: Landmark analysis
  • From: Sripal Kumar <[email protected]>
• Re: st: RE: Regressions with combinatorial of variables
  • From: José Luis Chávez Calva <[email protected]>
• st: Re: Multilevel modelling: questions about independence, residuals, balance
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• Re: st: Converting MM, YY varkables into a date variable
  • From: Nick Cox <[email protected]>
• Re: st: Converting MM, YY varkables into a date variable
  • From: Michael McCulloch <[email protected]>
• Re: st: Converting MM, YY varkables into a date variable
  • From: Nick Cox <[email protected]>
• Re: st: Converting MM, YY varkables into a date variable
  • From: Michael McCulloch <[email protected]>
• st: Converting MM, YY varkables into a date variable
  • From: Jung-eun Lee <[email protected]>
• st: Fwd: accessing stored values after streg estimation
  • From: <[email protected]>
• st: error with sccendif
  • From: Wassim Tarraf <[email protected]>
• Re: st: pweights in xtiles command are doing the opposite of what I expect them to do
  • From: Steven Samuels <[email protected]>
• st: RE: Regressions with combinatorial of variables
  • From: "Keith Dear" <[email protected]>
• Re: st: Regressions with combinatorial of variables
  • From: José Luis Chávez Calva <[email protected]>
• Re: AW: st: Testing for panel-level heteroskedasticity with xtgls
  • From: Syed Basher <[email protected]>
• Re: st: Regressions with combinatorial of variables
  • From: Nick Cox <[email protected]>
• st: Regressions with combinatorial of variables
  • From: José Luis Chávez Calva <[email protected]>
• re: Re: Re: st: Filtering methods with short time series
  • From: Christopher Baum <[email protected]>
• Re: st: Generate a more complex lagged variable
  • From: Ari Dothan <[email protected]>
• st: estimated rates with limits from xtnbreg
  • From: Susan Bondy <[email protected]>
• AW: st: Testing for panel-level heteroskedasticity with xtgls
  • From: [email protected]
• Re: st: Generate a more complex lagged variable
  • From: Nick Cox <[email protected]>
• Re: Re: st: Filtering methods with short time series
  • From: Nick Cox <[email protected]>
• Re: st: Generate a more complex lagged variable
  • From: Nick Cox <[email protected]>
• Re: st: simple slopes between continuous variable and dichotomous moderator
  • From: Maarten buis <[email protected]>
• Re: Re: st: Filtering methods with short time series
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: Generate a more complex lagged variable
  • From: Ari Dothan <[email protected]>
• st: RE: R: choice of ANOVA for an ecological experiment
  • From: "Lachenbruch, Peter" <[email protected]>
• st: simple slopes between continuous variable and dichotomous moderator
  • From: Rodrigo Isidor <[email protected]>
• Re: st: How to use weights in a random effect model
  • From: Steven Samuels <[email protected]>
• st: GMM in Stata 11: what's the assumption on error term: fixed effect or random effect?
  • From: Pejman Abedifar <[email protected]>
• Re: st: GMM in Stata 11
  • From: Ari Dothan <[email protected]>
• st: GMM in Stata 11
  • From: Pejman Abedifar <[email protected]>
• st: pweights in xtiles command are doing the opposite of what I expect them to do
  • From: Michael Boehm <[email protected]>
• Re: Re: st: Negative restrictions in svar
  • From: Sebastian Gomez <[email protected]>
• Re: Re: st: Negative restrictions in svar
  • From: Nick Cox <[email protected]>
• st: STATA-related job vacancy in London
  • From: James Plunkett <[email protected]>
• Re: Re: st: Negative restrictions in svar
  • From: Sebastian Gomez <[email protected]>
• st: Forecast Interval - Dynamic Prediction
  • From: Alejandro Mosiño <[email protected]>
• Re: st: generating Latex Odds ratio and CI table using esttab
  • From: ann montgomery <[email protected]>
• Re: st: generating Latex Odds ratio and CI table using esttab
  • From: ann montgomery <[email protected]>
• st: How to use weights in a random effect model
  • From: [email protected]
• st: interpreting coefficients estimated using system of equations
  • From: Pejman Abedifar <[email protected]>
• Re: st: predict y | y not observed after heckman
  • From: Maarten buis <[email protected]>
• Re: st: Tracking Replacements Made to Variables
  • From: Nick Cox <[email protected]>
• Re: st: predict y | y not observed after heckman
  • From: Florian Wakolbinger <[email protected]>
• Re: st: Negative restrictions in svar
  • From: Sebastian Gomez <[email protected]>
• Re: st: Negative restrictions in svar
  • From: Maarten buis <[email protected]>
• st: Negative restrictions in svar
  • From: Sebastian Gomez <[email protected]>
• Re: st: Tracking Replacements Made to Variables
  • From: Nick Cox <[email protected]>
• Re: st: predict y | y not observed after heckman
  • From: Maarten buis <[email protected]>
• st: predict y | y not observed after heckman
  • From: Florian Wakolbinger <[email protected]>
• Re: st: parallel process model in Stata
  • From: Maarten buis <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: Maarten buis <[email protected]>
• RE: st: FW: Marginal effects for the two-part model
  • From: "Michael Palmer" <[email protected]>
• st: parallel process model in Stata
  • From: Shubhabrata Mukherjee <[email protected]>