Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• Re: st: Re:
  • From: David Ashcraft <[email protected]>
• Re: st: Working with complex strings
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Re:
  • From: Steve Samuels <[email protected]>
• Re: st: Setting same seed, getting different random numbers.
  • From: daniel klein <[email protected]>
• st: Huff Model in Stata
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Setting same seed, getting different random numbers.
  • From: Patrick Roland <[email protected]>
• st: xtivreg,re - test for heteroskedasticity, serial correlation and multicollinearity
  • From: "Daniel Schalling" <[email protected]>
• st: RE: How to compute the CDF of a gamma distribution in Stata
  • From: Nick Cox <[email protected]>
• st: Autocorrelated overdispersed panel count data, and no "xtzinb"...
  • From: Michael Mulcahy <[email protected]>
• st: How to compute the CDF of a gamma distribution in Stata
  • From: "Tiago V. Pereira" <[email protected]>
• st: Generalized residuals after tobit
  • From: Fabien Bertho <[email protected]>
• st: RE: New command -pvenn- on SSC
  • From: Nick Cox <[email protected]>
• Re: st: rclass AND sclass AND eclass
  • From: Sergiy Radyakin <[email protected]>
• st: New command -pvenn- on SSC
  • From: Wenfeng Gong <[email protected]>
• Re: st: Working with complex strings
  • From: Nick Cox <[email protected]>
• Re: st: Working with complex strings
  • From: Steve Nakoneshny <[email protected]>
• RE: st: RE: Small sample with clustered data
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Rolling Means and Standard Deviations
  • From: Scott Merryman <[email protected]>
• Re: st: xtfrontier and frontier
  • From: Scott Merryman <[email protected]>
• st: RE: Rolling Means and Standard Deviations
  • From: Nick Cox <[email protected]>
• st: Rolling Means and Standard Deviations
  • From: David Ashcraft <[email protected]>
• Re: st: RE: Small sample with clustered data
  • From: [email protected]
• RE: st: option problems with byhist (interlaced histogram)
  • From: Nick Cox <[email protected]>
• Re: st: option problems with byhist (interlaced histogram)
  • From: Maarten Buis <[email protected]>
• Re: st: Missing Wald test with -cluster- option
  • From: John Antonakis <[email protected]>
• Re: st: capturing the sizes of the sequences of countinous (uninterrupted) values equal to 1
  • From: Nick Cox <[email protected]>
• Re: st: capturing the sizes of the sequences of countinous (uninterrupted) values equal to 1
  • From: Nick Cox <[email protected]>
• Re: st: capturing the sizes of the sequences of countinous (uninterrupted) values equal to 1
  • From: Nick Cox <[email protected]>
• Re: st: rclass AND sclass AND eclass
  • From: Nick Cox <[email protected]>
• st: capturing the sizes of the sequences of countinous (uninterrupted) values equal to 1
  • From: massimiliano stacchini <[email protected]>
• Re: st: Working with complex strings
  • From: Nick Cox <[email protected]>
• RE: st: Working with complex strings
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: adjusted fitted-line/scatter plot after bootstrap with CI
  • From: Nick Cox <[email protected]>
• Re: st: adjusted fitted-line/scatter plot after bootstrap with CI
  • From: Maarten Buis <[email protected]>
• AW: st: Working with complex strings
  • From: "Trelle Sven" <[email protected]>
• Re: st: adjusted fitted-line/scatter plot after bootstrap with CI
  • From: Nick Cox <[email protected]>
• Re: st: Working with complex strings
  • From: Nick Cox <[email protected]>
• Re: st: rclass AND sclass AND eclass
  • From: Maarten Buis <[email protected]>
• st: xtfrontier and frontier
  • From: giovanni federighi <[email protected]>
• RE: st: Working with complex strings
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: Working with complex strings
  • From: Steve Nakoneshny <[email protected]>
• st: Working with complex strings
  • From: "Dudekula, Anwar" <[email protected]>
• st: adjusted fitted-line/scatter plot after bootstrap with CI
  • From: Juan Dominguez <[email protected]>
• st: Working with complex strings
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: Chi-Square produces consistent Type I error for large sample
  • From: "Davydenko, Maria" <[email protected]>
• Re: st: rclass AND sclass AND eclass
  • From: daniel klein <[email protected]>
• Re: st: RE: Winsorize by time and group
  • From: "Gokhan Y." <[email protected]>
• st: rclass AND sclass AND eclass
  • From: Sergiy Radyakin <[email protected]>
• Re: st: discrete probability effect
  • From: Ridha Ayu <[email protected]>
• Re: st: Chi-Square produces consistent Type I error for large sample
  • From: Steve Samuels <[email protected]>
• Re: st: Chi-Square produces consistent Type I error for large sample
  • From: Richard Williams <[email protected]>
• st: Chi-Square produces consistent Type I error for large sample
  • From: "Davydenko, Maria" <[email protected]>
• st: New version of -tabmult- for SSC
  • From: Minh Nguyen <[email protected]>
• Re: st: discrete probability effect
  • From: Richard Williams <[email protected]>
• st: discrete probability effect
  • From: Ridha Ayu <[email protected]>
• RE: st: dot product across many variables
  • From: Nick Cox <[email protected]>
• Re: st: dot product across many variables
  • From: Austin Nichols <[email protected]>
• Re: st: dot product across many variables
  • From: Austin Nichols <[email protected]>
• Re: st: dot product across many variables
  • From: daniel klein <[email protected]>
• RE: st: dot product across many variables
  • From: Nick Cox <[email protected]>
• Re: st: option problems with byhist (interlaced histogram)
  • From: Austin Nichols <[email protected]>
• st: option problems with byhist (interlaced histogram)
  • From: Patricia Biedermann <[email protected]>
• RE: st: dot product across many variables
  • From: Nick Cox <[email protected]>
• Re: st: dot product across many variables
  • From: Nick Cox <[email protected]>
• Re: st: dot product across many variables
  • From: Paul Burkander <[email protected]>
• Re: st: friedman test
  • From: Nick Cox <[email protected]>
• st: dot product across many variables
  • From: Paul Burkander <[email protected]>
• st: Re: friedman test
  • From: "Joseph Coveney" <[email protected]>
• re:Re: st: Standard deviation for trailing x months
  • From: Christopher Baum <[email protected]>
• Re: Re: st: Standard deviation for trailing x months
  • From: Nick Cox <[email protected]>
• Re: st: friedman test
  • From: Anders Alexandersson <[email protected]>
• Re: st: friedman test
  • From: Nick Cox <[email protected]>
• Re: st: Standard deviation for trailing x months
  • From: Nick Cox <[email protected]>
• st: friedman test
  • From: "Daniela Ferrante (Lab. Statistica)" <[email protected]>
• Re: st: Stata12 Mac - crashes at "browse if"
  • From: Kerry Kammire <[email protected]>
• st: Standard deviation for trailing x months
  • From: Nick K <[email protected]>
• Re: st: ICE and two conditions
  • From: daniel klein <[email protected]>
• st: ICE and two conditions
  • From: Morten Frydenberg <[email protected]>
• Re: st: question about seqlogit
  • From: Alberto R Osella <[email protected]>
• Re: st: question about seqlogit
  • From: Alberto R Osella <[email protected]>
• Re: st: question about seqlogit
  • From: Alberto R Osella <[email protected]>
• Re: st: question about seqlogit
  • From: Maarten Buis <[email protected]>
• st: question about seqlogit
  • From: Alberto R Osella <[email protected]>
• st: RE: starting values invalid
  • From: Nick Cox <[email protected]>
• st: starting values invalid
  • From: "Ivica Rubil" <[email protected]>
• Re: st: Small sample with clustered data
  • From: Austin Nichols <[email protected]>
• st: RE: Winsorize by time and group
  • From: Nick Cox <[email protected]>
• RE: st: max number of variables in Stata IC/11.1
  • From: "Ivica Rubil" <[email protected]>
• Re: st: max number of variables in Stata IC/11.1
  • From: Maarten Buis <[email protected]>
• RE: st: max number of variables in Stata IC/11.1
  • From: Nick Cox <[email protected]>
• Re: st: max number of variables in Stata IC/11.1
  • From: Maarten Buis <[email protected]>
• RE: st: max number of variables in Stata IC/11.1
  • From: "Ivica Rubil" <[email protected]>
• Re: st: max number of variables in Stata IC/11.1
  • From: Maarten Buis <[email protected]>
• st: max number of variables in Stata IC/11.1
  • From: "Ivica Rubil" <[email protected]>
• st: Winsorize by time and group
  • From: Gokhan Yilmaz <[email protected]>
• Re: st: Dataset of means from the three largest values of a group
  • From: Nick Cox <[email protected]>
• Re: st: Normalization of (standard deviation of) errors in mvprobit
  • From: Maarten Buis <[email protected]>
• st: Update of sqindexplot
  • From: Ulrich Kohler <[email protected]>
• Re: st: Re: Error on -pantob-
  • From: Muyang Zhang <[email protected]>
• Re: st: Re: Error on -pantob-
  • From: Nick Cox <[email protected]>
• Re: st: Re: Cleaning messy data
  • From: Nick Cox <[email protected]>
• Re: st: Re: Error on -pantob-
  • From: Nick Cox <[email protected]>
• Re: st: Re: Error on -pantob-
  • From: Muyang Zhang <[email protected]>
• Re: st: Re: Error on -pantob-
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: FW: Possible to generate a variable and specifying the label?
  • From: Nick Cox <[email protected]>
• st: RE: RE: FW: Possible to generate a variable and specifying the label?
  • From: "J. J. W." <[email protected]>
• Re: st: Re: Cleaning messy data
  • From: Nick Cox <[email protected]>
• st: Re: Error on -pantob-
  • From: Muyang Zhang <[email protected]>
• st: Error on -pantob-
  • From: Muyang Zhang <[email protected]>
• Re: st: Missing Wald test with -cluster- option
  • From: Steve Samuels <[email protected]>
• Re: st: Stata12 Mac - crashes at "browse if"
  • From: Steve Samuels <[email protected]>
• Re: st: Stata12 Mac - crashes at "browse if"
  • From: Fred Wolfe <[email protected]>
• st: Stata12 Mac - crashes at "browse if"
  • From: honeybear <[email protected]>
• st: New versions of -margprev- and -marglmean- for SSC
  • From: "Roger B. Newson" <[email protected]>
• st: RE: Small sample with clustered data
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Re: Cleaning messy data
  • From: Martyn Sherriff <[email protected]>
• Re: st: Small sample with clustered data
  • From: [email protected]
• Re: st: Dataset of means from the three largest values of a group
  • From: Iulian Ihnatov <[email protected]>
• Re: st: Dataset of means from the three largest values of a group
  • From: Nick Cox <[email protected]>
• Re: st: Dataset of means from the three largest values of a group
  • From: Nick Cox <[email protected]>
• st: Dataset of means from the three largest values of a group
  • From: Iulian Ihnatov <[email protected]>
• Re: st: Re: Cleaning messy data
  • From: Nick Cox <[email protected]>
• RE: st: Graphing medians with xtgraph bug
  • From: "Seed, Paul" <[email protected]>
• st: Normalization of (standard deviation of) errors in mvprobit
  • From: saqlain raza <[email protected]>
• Re: st: Missing Wald test with -cluster- option
  • From: Austin Nichols <[email protected]>
• Re: st: Error in chunky
  • From: Nick Cox <[email protected]>
• Re: st: Small sample with clustered data
  • From: Austin Nichols <[email protected]>
• re: st: issues with xtabond2
  • From: Christopher Baum <[email protected]>
• Re: st: bootstrap weights
  • From: Austin Nichols <[email protected]>
• Re: st: Re: Cleaning messy data
  • From: daniel klein <[email protected]>
• Re: st: Issues with xtabond2
  • From: "Alan Jenn" <[email protected]>
• RE: st: nested logit tree
  • From: "Alvarez,Sergio" <[email protected]>
• st: Re: Cleaning messy data
  • From: Martyn Sherriff <[email protected]>
• re: st: Issues with xtabond2
  • From: Christopher Baum <[email protected]>
• RE: st: nested logit tree
  • From: Solon Moreira <[email protected]>
• st: RE: Issues with xtabond2
  • From: DE SOUZA Eric <[email protected]>
• Re: st: nested logit tree
  • From: "Alvarez,Sergio" <[email protected]>
• st: Error in chunky
  • From: "King, Carina" <[email protected]>
• Re: st: Issues with xtabond2
  • From: Christopher Baum <[email protected]>
• st: Missing Wald test with -cluster- option
  • From: John Antonakis <[email protected]>
• Re: st: heckman selection model in stata question
  • From: Miguel Ampudia Fraile <[email protected]>
• st: nested logit tree
  • From: Solon Moreira <[email protected]>
• Re: st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: "David Wiesinger" <[email protected]>
• st: Small sample with clustered data
  • From: [email protected]
• Re: st: RE: Re: pwcompare
  • From: Janet Hill <[email protected]>
• Re: st: How to figure out the most common value
  • From: Maarten Buis <[email protected]>
• st: How to figure out the most common value
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: How to figure out the most common value
  • From: Nick Cox <[email protected]>
• st: Mean of interval-censored data
  • From: <[email protected]>
• st: How to figure out the most common value
  • From: "Dudekula, Anwar" <[email protected]>
• st: RE: Issues with xtabond2
  • From: DE SOUZA Eric <[email protected]>
• st: heckman selection model in stata question
  • From: Maarten Buis <[email protected]>
• Re: st: Interaction term or Difference in Differences
  • From: Yuval Arbel <[email protected]>
• st: Interaction term or Difference in Differences
  • From: Quang Nguyen <[email protected]>
• RE: st: RE: Re: pwcompare
  • From: amir gahremanpour <[email protected]>
• st: Issues with xtabond2
  • From: "Alan Jenn" <[email protected]>
• Re: st: xtset and xtreg for panel data
  • From: Jeph Herrin <[email protected]>
• Re: st: xtset and xtreg for panel data
  • From: Nick Cox <[email protected]>
• st: post-hoc test for 2x3 table
  • From: "Mitchell F. Berman" <[email protected]>
• st: Poultry data
  • From: "Shittu, Aminu" <[email protected]>
• st: 'xtgls' for panels that exceed matsize limit
  • From: Ramona Meyricke <[email protected]>
• Re: st: RE: Re: pwcompare
  • From: Janet Hill <[email protected]>
• st: xtset and xtreg for panel data
  • From: Andrew Wong Yoon Loong <[email protected]>
• Re: st: bootstrap weights
  • From: Stefano Verde <[email protected]>
• st: Mean of interval-censored data
  • From: Paul von Hippel <[email protected]>
• Re: st: exact row in which error occurs
  • From: Jeph Herrin <[email protected]>
• Re: st: Computation Speed for Bootstrapping
  • From: Jeph Herrin <[email protected]>
• st: Data setup for analysis of choice experiment in STATA
  • From: Hadji Cortez Jalotjot <[email protected]>
• Re: st: How to predict in mixed level linear regression when key predictor variable is previous years result
  • From: Muhammad Anees <[email protected]>
• Re: st: How to predict in mixed level linear regression when key predictor variable is previous years result
  • From: Yuval Arbel <[email protected]>
• Re: st: Multi-level discrete time survival analysis
  • From: Robert A Yaffee <[email protected]>
• st: How to predict in mixed level linear regression when key predictor variable is previous years result
  • From: "Hunter Paul Prof (MED)" <[email protected]>
• Re: st: graphing pre-calculated data
  • From: Nick Cox <[email protected]>
• st: Computation Speed for Bootstrapping
  • From: Danny Dan <[email protected]>
• st: graphing pre-calculated data
  • From: ann montgomery <[email protected]>
• Re: st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: "Joao Ricardo F. Lima" <[email protected]>
• st: Multi-level discrete time survival analysis
  • From: 0 1 <[email protected]>
• Re: st: bootstrap weights
  • From: Stas Kolenikov <[email protected]>
• st: RE: Re: pwcompare
  • From: "Lachenbruch, Peter" <[email protected]>
• st: RE: Re: How do I split my string variable by capital letters?
  • From: Elena Vidal <[email protected]>
• Re: st: bootstrap weights
  • From: Stefano Verde <[email protected]>
• re: Re: st: Regression Discontinuity Design using age + only binary variables
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: Re: st: stubwidth(#) for output other than table?
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: what is the command that used to be "outreg" in the old version
  • From: "Poro Zhang" <[email protected]>
• st: -xtlogit- vs -xtmelogit- and predicted random effects
  • From: Jeph Herrin <[email protected]>
• st: Re:
  • From: Yuval Arbel <[email protected]>
• Re: st: two stage tobit estimation using unbalanced panel data
  • From: Muhammad Anees <[email protected]>
• Re: st: what is the command that used to be "outreg" in the old version
  • From: Muhammad Anees <[email protected]>
• st: two stage tobit estimation using unbalanced panel data
  • From: Shreosi Sanyal Dutta <[email protected]>
• Re: st: what is the command that used to be "outreg" in the old version
  • From: daniel klein <[email protected]>
• Re: st: what is the command that used to be "outreg" in the old version
  • From: Muhammad Anees <[email protected]>
• st: what is the command that used to be "outreg" in the old version
  • From: daniel klein <[email protected]>
• [no subject]
  • From: David Ashcraft <[email protected]>
• Re: st: what is the command that used to be "outreg" in the old version
  • From: Muhammad Anees <[email protected]>
• st: what is the command that used to be "outreg" in the old version
  • From: "Poro Zhang" <[email protected]>
• Re: st: how to draw a timeline bar failure figure.
  • From: "G. Dai" <[email protected]>
• Re: st: bootstrap weights
  • From: Cameron McIntosh <[email protected]>
• Re: st: bootstrap weights
  • From: Stas Kolenikov <[email protected]>
• RE: st: bootstrap weights
  • From: Cameron McIntosh <[email protected]>
• st: re: Post Matching Analysis for PSM
  • From: ucjt335 <[email protected]>
• Re: st: bootstrap weights
  • From: Stefano Verde <[email protected]>
• Re: st: stubwidth(#) for output other than table?
  • From: Nick Cox <[email protected]>
• st: xtabond2 issues
  • From: "Alan Jenn" <[email protected]>
• st: stubwidth(#) for output other than table?
  • From: "Ariel Linden, DrPH" <[email protected]>
• st: Cragg-Donald statistic test for weak instruments
  • From: "Lim, Elizabeth" <[email protected]>
• Re: st: local within global
  • From: Nick Cox <[email protected]>
• Re: st: importing quirky csv
  • From: James Sams <[email protected]>
• st: Re: pwcompare
  • From: Janet Hill <[email protected]>
• st: RE: RE: graphing predicted effects
  • From: Sunil Kumar <[email protected]>
• st: local within global
  • From: adrien bouguen <[email protected]>
• st: RE: RE: graphing predicted effects
  • From: "Hoffman, George" <[email protected]>
• st: selecting cases bordering sampled cases
  • From: Viktor Emonds <[email protected]>
• [no subject]
  • From: Unknown
• st: RE: graphing predicted effects
  • From: "L.M.A. Mulotte" <[email protected]>
• Re: st: manipulate built-in stata commands
  • From: Nick Cox <[email protected]>
• Re: st: manipulate built-in stata commands
  • From: [email protected]
• Re: st: manipulate built-in stata commands
  • From: Nick Cox <[email protected]>
• Re: RE: st: manipulate built-in stata commands
  • From: [email protected]
• Fwd: st: regression to the mean using ancova
  • From: Newton Chagoma Chagoma <[email protected]>
• st: regression to the mean using ancova
  • From: Newton Chagoma Chagoma <[email protected]>
• Re: st: graphing predicted effects
  • From: Maarten Buis <[email protected]>
• Re: st: merging dataset...
  • From: daniel klein <[email protected]>
• Re: st: Regression Discontinuity Design using age + only binary variables
  • From: Guo Xu <[email protected]>
• st: graphing predicted effects
  • From: "L.M.A. Mulotte" <[email protected]>
• st: merging dataset...
  • From: Newton Chagoma Chagoma <[email protected]>
• st: Bootstrapping
  • From: nil sen <[email protected]>
• st: Re: importing quirky csv
  • From: Gordon Hughes <[email protected]>
• Re: st: how to draw a timeline bar failure figure.
  • From: Nick Cox <[email protected]>
• st: Regression Discontinuity Design using age + only binary variables
  • From: Richardson <[email protected]>
• st: Course on Structural Equation Modeling using STATA 12 (Canbera, Australia 16-20 January)
  • From: Anna Reimondos <[email protected]>
• st: how to draw a timeline bar failure figure.
  • From: "G. Dai" <[email protected]>
• Re: st: Difference of values in the same column/variable
  • From: Gokhan Yilmaz <[email protected]>
• st: wild looking elasticity figures from nlsur_aids
  • From: Mintewab Bezabih <[email protected]>
• st: RE: Calculating Averages of Each Observation for Panel Data
  • From: Nick Cox <[email protected]>
• st: Calculating Averages of Each Observation for Panel Data
  • From: Andrew Wong Yoon Loong <[email protected]>
• RE: st: Differencing when dependent variable only defined every 4th year
  • From: Nick Cox <[email protected]>
• Re: st: Differencing when dependent variable only defined every 4th year
  • From: Richard Herron <[email protected]>
• Re: st: Unique identifier from a string name
  • From: daniel klein <[email protected]>
• st: RE: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: Nick Cox <[email protected]>
• st: metan - consistency between six, two and three variable forms
  • From: Richard Palmer-Jones <[email protected]>
• st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: "David Wiesinger" <[email protected]>
• RE: st: Unique identifier from a string name
  • From: Barry Quinn <[email protected]>
• Re: st: Duration setup
  • From: Nick Cox <[email protected]>
• st: Duration setup
  • From: M Martin <[email protected]>
• RE: st: Unique identifier from a string name
  • From: Barry Quinn <[email protected]>
• Re: st: Unique identifier from a string name
  • From: [email protected] (Brendan Halpin)
• Re: st: Poisson residuals
  • From: Fabien Bertho <[email protected]>
• Re: st: Unique identifier from a string name
  • From: Maarten Buis <[email protected]>
• Re: st: esttab SE in brackets in excel
  • From: Carsten Sauer <[email protected]>
• Re: st: esttab SE in brackets in excel
  • From: Muhammad Anees <[email protected]>
• Re: st: Unique identifier from a string name
  • From: Nick Cox <[email protected]>
• st: esttab SE in brackets in excel
  • From: "Marian Bohl" <[email protected]>
• RE: st: Unique identifier from a string name
  • From: Barry Quinn <[email protected]>
• RE: st: exact row in which error occurs
  • From: Nick Cox <[email protected]>
• RE: st: manipulate built-in stata commands
  • From: Nick Cox <[email protected]>
• Re: st: manipulate built-in stata commands
  • From: Maarten Buis <[email protected]>
• st: importing quirky csv
  • From: Douglas Levy <[email protected]>
• Re: st: manipulate built-in stata commands
  • From: "Jakob Pohlisch" <[email protected]>
• RE: st: exact row in which error occurs
  • From: "Ivica Rubil" <[email protected]>
• Re: st: exact row in which error occurs
  • From: Daniel Feenberg <[email protected]>
• Re: st: how to write "byable" for this program?
  • From: Nick Cox <[email protected]>
• Re: st: barcharts with error plot + legend?
  • From: Ronan Conroy <[email protected]>
• Re: Re: st: forced end of do-file
  • From: Nick Cox <[email protected]>
• RE: Re: st: forced end of do-file
  • From: "Hoogeboom Thomas (EPID)" <[email protected]>
• st: how to write "byable" for this program?
  • From: econqian222 <[email protected]>
• Re: st: Unique identifier from a string name
  • From: [email protected] (Brendan Halpin)
• Re: st: manipulate built-in stata commands
  • From: Nick Cox <[email protected]>
• Re: st: Unique identifier from a string name
  • From: Nick Cox <[email protected]>
• Re: st: manipulate built-in stata commands
  • From: daniel klein <[email protected]>
• Re: st: Unique identifier from a string name
  • From: daniel klein <[email protected]>
• Re: st: The whole code of grid-search for "byable"
  • From: Nick Cox <[email protected]>
• st: The whole code of grid-search for "byable"
  • From: econqian222 <[email protected]>
• Re: st: exact row in which error occurs
  • From: Nick Cox <[email protected]>
• st: Unique identifier from a string name
  • From: Barry Quinn <[email protected]>
• st: manipulate built-in stata commands
  • From: [email protected]
• st: exact row in which error occurs
  • From: "Ivica Rubil" <[email protected]>
• Re: st: Conditional infile statements,
  • From: Gordon Hughes <[email protected]>
• Re: st: Cleaning Strings and Regular Expressions
  • From: Nick Cox <[email protected]>
• Re: st: Combining variables without adding
  • From: Nick Cox <[email protected]>
• Re: st: barcharts with error plot + legend?
  • From: Nick Cox <[email protected]>
• Re: st: Poisson residuals
  • From: Maarten Buis <[email protected]>
• Re: st: barcharts with error plot + legend?
  • From: Maarten Buis <[email protected]>
• Re: st: FW: Possible to generate a variable and specifying the label?
  • From: Maarten Buis <[email protected]>
• st: Poisson residuals
  • From: Fabien Bertho <[email protected]>
• st: RE: stpm2 and interval censoring
  • From: "Lambert, Paul C. (Dr.)" <[email protected]>
• re: st: understanding the -asis()- option in -stsplit-
  • From: "Jesper Lindhardsen" <[email protected]>
• st: RE: FW: Possible to generate a variable and specifying the label?
  • From: "Jesper Lindhardsen" <[email protected]>
• st: stpm2 and interval censoring
  • From: Heidi Doe <[email protected]>
• st: FW: Possible to generate a variable and specifying the label?
  • From: "J. J. W." <[email protected]>
• Re: st: barcharts with error plot + legend?
  • From: Muhammad Anees <[email protected]>
• st: Re: How do I split my string variable by capital letters?
  • From: "Joseph Coveney" <[email protected]>
• Re: st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: "Joao Ricardo F. Lima" <[email protected]>
• Re: st: Difference of values in the same column/variable
  • From: Tirthankar Chakravarty <[email protected]>
• Re: st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: Steve Samuels <[email protected]>
• Re: st: Difference of values in the same column/variable
  • From: Anna Reimondos <[email protected]>
• Re: st: How do I split my string variable by capital letters?
  • From: Anna Reimondos <[email protected]>
• Re: st: Cleaning Strings and Regular Expressions
  • From: Tirthankar Chakravarty <[email protected]>
• Re: st: Combining variables without adding
  • From: daniel klein <[email protected]>
• Re: st: Combining variables without adding
  • From: Cory Smith <[email protected]>
• st: Combining variables without adding
  • From: "Jessica Kopsic" <[email protected]>
• st: How do I split my string variable by capital letters?
  • From: Elena Vidal <[email protected]>
• st: barcharts with error plot + legend?
  • From: Guo Xu <[email protected]>
• st: Cleaning Strings and Regular Expressions
  • From: Cory Smith <[email protected]>
• Re: st: mprobit with exclusion restriction
  • From: saqlain raza <[email protected]>
• Re: st: Thanks and Amazement
  • From: Yuval Arbel <[email protected]>
• Re: st: RE: xtoverid with the partial() option?
  • From: Jacob Fowles <[email protected]>
• st: Re: mi may not be combined with by
  • From: Paul von Hippel <[email protected]>
• RE: st: Differencing when dependent variable only defined every 4th year
  • From: Nick Cox <[email protected]>
• Re: st: Differencing when dependent variable only defined every 4th year
  • From: Richard Herron <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• Re: st: FW: dynamic panel - how to get indiviual result for each cross section?
  • From: Sami Alameen <[email protected]>
• st: RE: Differencing when dependent variable only defined every 4th year
  • From: Nick Cox <[email protected]>
• Re: st: Thanks and Amazement
  • From: Ronan Conroy <[email protected]>
• Re: st: Thanks and Amazement
  • From: "Elizabeth Allred" <[email protected]>
• st: RE: problem of byable
  • From: Nick Cox <[email protected]>
• st: Differencing when dependent variable only defined every 4th year
  • From: Sebastian Barfort <[email protected]>
• Re: st: Failure to detect strings that look completely identical
  • From: Ronan Conroy <[email protected]>
• RE: st: model selection using information criteria with xtlsdvc or xtabond2
  • From: Nick Cox <[email protected]>
• Re: st: mi may not be combined with by
  • From: daniel klein <[email protected]>
• RE: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• RE: st: EFFICIENCY SCORES WITH DEA COMMAND
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• RE: st: Failure to detect strings that look completely identical
  • From: Nick Cox <[email protected]>
• Re: st: Store results from table command in matrix
  • From: Barbro Widerstedt <[email protected]>
• R: st: model selection using information criteria with xtlsdvc or xtabond2
  • From: "Francesco Aiello" <[email protected]>
• Re: st: EFFICIENCY SCORES WITH DEA COMMAND
  • From: Graziella Bonanno <[email protected]>
• st: problem of byable
  • From: econqian222 <[email protected]>
• Re: st: model selection using information criteria with xtlsdvc or xtabond2
  • From: Marcello Pagano <[email protected]>
• st: Trouble with mi impute truncreg
  • From: Paul von Hippel <[email protected]>
• Re: st: Thanks and Amazement
  • From: "William Gould, StataCorp LP" <[email protected]>
• st: thanks
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: EFFICIENCY SCORES WITH DEA COMMAND
  • From: Maarten Buis <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: "Ariel Linden, DrPH" <[email protected]>
• st: mi may not be combined with by
  • From: Paul von Hippel <[email protected]>
• RE: st: model selection using information criteria with xtlsdvc or xtabond2
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: multilevel logistic model on aggregated data
  • From: George Leckie <[email protected]>
• st: EFFICIENCY SCORES WITH DEA COMMAND
  • From: Graziella Bonanno <[email protected]>
• Re: st: How to map zip codes on map
  • From: Donna L Quadri <[email protected]>
• st: Estimation selection model with selmlog/svyselmlog using sample weights
  • From: "David Wiesinger" <[email protected]>
• Re: st: Failure to detect strings that look completely identical
  • From: Ronan Conroy <[email protected]>
• st: RE: non linear estimation
  • From: Nick Cox <[email protected]>
• Re: st: RE: Probability and non-response weights; how can I create a composite weight?
  • From: Steve Samuels <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• Re: st: RE: Probability and non-response weights; how can I create a composite weight?
  • From: Ángel Rodríguez Laso <[email protected]>
• Re: st: Text in graph
  • From: Lars Folkestad <[email protected]>
• Re: st: Text in graph
  • From: Phil Clayton <[email protected]>
• st: non linear estimation
  • From: "Graeml (Dainf)" <[email protected]>
• Re: st: How to write byable ado file that adds variables to data
  • From: Phil Clayton <[email protected]>
• Re: st: Text in graph
  • From: Lars Folkestad <[email protected]>
• Re: st: How to write byable ado file that adds variables to data
  • From: Richard Herron <[email protected]>
• Re: st: Text in graph
  • From: Phil Clayton <[email protected]>
• st: Text in graph
  • From: Lars Folkestad <[email protected]>
• st: Xmluse "unrecognizable XML doctype"
  • From: "Monique van den Broek" <[email protected]>
• st: How to write byable ado file that adds variables to data
  • From: Richard Herron <[email protected]>
• st: Fixed/Random Effects models on NOT panel data
  • From: Gerardo Infante <[email protected]>
• Re: st: mprobit with exclusion restriction
  • From: saqlain raza <[email protected]>
• Re: st: forced end of do-file
  • From: Nick Cox <[email protected]>
• st: forced end of do-file
  • From: "Hoogeboom Thomas (EPID)" <[email protected]>
• Re: st: mprobit with exclusion restriction
  • From: Maarten Buis <[email protected]>
• st: How to map zip codes on map
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: "Seed, Paul" <[email protected]>
• st: comparing single and multiple event models
  • From: lumbwe chola <[email protected]>
• Re: st: Merging datasets with non-unique identifiers
  • From: Teresio Poggio <[email protected]>
• Re: st: Merging datasets with non-unique identifiers
  • From: Nick Cox <[email protected]>
• st: Merging datasets with non-unique identifiers
  • From: Mary Ann Cruz Bautista <[email protected]>
• RE: st:Failure to detect strings that look completely identical
  • From: Nicola Man <[email protected]>
• st: Re: How to cite a macro in ODBC's SQL select statement
  • From: "Joseph Coveney" <[email protected]>
• RE: st: model selection using information criteria with xtlsdvc or xtabond2
  • From: Cameron McIntosh <[email protected]>
• Re: st: Need help on variance estimation using replication methods while incorporating raking
  • From: Steve Samuels <[email protected]>
• st: model selection using information criteria with xtlsdvc or xtabond2
  • From: Sebastian Petrick <[email protected]>
• Re: st: Need help on variance estimation using replication methods while incorporating raking
  • From: Stas Kolenikov <[email protected]>
• RE: st: Need help on variance estimation using replication methods while incorporating raking
  • From: Cameron McIntosh <[email protected]>
• Re: st: Need help on variance estimation using replication methods while incorporating raking
  • From: Steven Samuels <[email protected]>
• st: RE: xtoverid with the partial() option?
  • From: "Schaffer, Mark E" <[email protected]>
• st: Need help on variance estimation using replication methods while incorporating raking
  • From: Bilal Khan <[email protected]>
• Re: st: multilevel logistic model on aggregated data
  • From: Steven Samuels <[email protected]>
• st: paired sample based on multiple characteristics
  • From: Gokhan Yilmaz <[email protected]>
• [no subject]
  • From: "David Wiesinger" <[email protected]>
• Re: st: Failure to detect strings that look completely identical
  • From: Nick Cox <[email protected]>
• st: Creating a paired sample based on multiple characteristics
  • From: [email protected]
• st: Creating a paired sample based on multiple characteristics
  • From: "Gokhan Yilmaz" <[email protected]>
• st: Can -merge ..., nokeep- result in more observations?
  • From: Jen Zhen <[email protected]>
• st: how to insert blank in a table
  • From: Nobuya Fukugawa <[email protected]>
• Re: st: multilevel logistic model on aggregated data
  • From: Joerg Luedicke <[email protected]>
• Re: st: Standard Errors using Bootstrapping with Panel Data
  • From: nil sen <[email protected]>
• Re: st: Store results from table command in matrix
  • From: Nick Cox <[email protected]>
• Re: st: Updating the value of a specific cll of a matrix using the value of a variable
  • From: Nick Cox <[email protected]>
• st: Updating the value of a specific cll of a matrix using the value of a variable
  • From: "Tatiana SOKOLOVA" <[email protected]>
• re: st: Store results from table command in matrix
  • From: Christopher Baum <[email protected]>
• RE: st: psmatch2 with exact matching
  • From: "Caskey, Judson" <[email protected]>
• st: Store results from table command in matrix
  • From: Barbro Widerstedt <[email protected]>
• st: FW: dynamic panel - how to get indiviual result for each cross section?
  • From: Neelu Seetaram <[email protected]>
• RE: st: multilevel logistic model on aggregated data
  • From: Maria Paola Caria <[email protected]>
• st: stpm2cif command on SSC
  • From: "Hinchliffe, Sally R." <[email protected]>
• Re: st: multilevel logistic model on aggregated data
  • From: Joerg Luedicke <[email protected]>
• Re: st: axis label font
  • From: Ronan Conroy <[email protected]>
• Re: st: Getting my result
  • From: Ronan Conroy <[email protected]>
• Re: st: margins after oprobit with interactions
  • From: Richard Williams <[email protected]>
• Re: st: problem with stata 12 and windows 7
  • From: Richard Williams <[email protected]>
• Re: st: mprobit with exclusion restriction
  • From: Maarten Buis <[email protected]>
• st: mprobit with exclusion restriction
  • From: saqlain raza <[email protected]>
• RE: st: Failure to detect strings that look completely identical
  • From: Nick Cox <[email protected]>
• st: Looping over files
  • From: Nick Cox <[email protected]>
• Re: st: Thanks and Amazement
  • From: Muhammad Anees <[email protected]>
• Re: st: Thanks and Amazement
  • From: [email protected]
• Re: st: Getting my results
  • From: Phil Clayton <[email protected]>
• Re: st: Getting my results
  • From: Alberto R Osella <[email protected]>
• st: Competing Risks with Multiple Failure per Subject
  • From: Björn Wallbrecht <[email protected]>
• st: RE: Getting my results
  • From: Tim Evans <[email protected]>
• st: Getting my results
  • From: Aminu Shittu <[email protected]>
• st: Getting my result
  • From: Aminu Shittu <[email protected]>
• Re: st: Intermittent crash: opening Data Editor, using SSH X-forwarding
  • From: Dave Ewart <[email protected]>
• st: multilevel logistic model on aggregated data
  • From: Maria Paola Caria <[email protected]>
• Re: st: Standard Errors using Bootstrapping with Panel Data
  • From: Benjamin Volland <[email protected]>
• st: Standard Errors using Bootstrapping with Panel Data
  • From: nil sen <[email protected]>
• st: update margdistfit available
  • From: Maarten Buis <[email protected]>
• Re: st: Failure to detect strings that look completely identical
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• Re: st: problem with stata 12 and windows 7
  • From: Muhammad Anees <[email protected]>
• Re: st: axis label font
  • From: Scott Merryman <[email protected]>
• st: Failure to detect strings that look completely identical
  • From: Nicola Man <[email protected]>
• st: problem with stata 12 and windows 7
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: Re: how do i get a bias-corrected CI for coefficient combination
  • From: Steven Samuels <[email protected]>
• st: xtoverid with the partial() option?
  • From: Jacob Fowles <[email protected]>
• st: Thanks and Amazement
  • From: "Ben Hoen" <[email protected]>
• st: Re: how do i get a bias-corrected CI for coefficient combination
  • From: Star Chen <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Richard Williams <[email protected]>
• st: axis label font
  • From: Bulent Koksal <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: "Ariel Linden, DrPH" <[email protected]>
• RE: st: Panel unit root test
  • From: "Tong, Tingting" <[email protected]>
• RE: st: tabulate produces inconsistent output?
  • From: Nick Cox <[email protected]>
• st: FW: dynamic panel - how to get indiviual result for each cross section?
  • From: Neelu Seetaram <[email protected]>
• Re: st: margins after oprobit with interactions
  • From: [email protected] (Brendan Halpin)
• Re: st: FW: dynamic panel - how to get indiviual result for each cross section?
  • From: Nick Cox <[email protected]>
• Re: st: destring ignores more than what specified in ignore()
  • From: Nick Cox <[email protected]>
• Re: st: Panel unit root test
  • From: Nick Cox <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Nick Cox <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Christian Raschke <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Muhammad Anees <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Christian Raschke <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Richard Williams <[email protected]>
• Re: st: tabulate produces inconsistent output?
  • From: Christian Raschke <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• RE: st: destring ignores more than what specified in ignore()
  • From: "Impavido, Gregorio" <[email protected]>
• st: margins after oprobit with interactions
  • From: Vincenzo Carrieri <[email protected]>
• Re: st: Panel unit root test
  • From: Muhammad Anees <[email protected]>
• RE: st: RE: Probability and non-response weights; how can I create a composite weight?
  • From: Cameron McIntosh <[email protected]>
• st: Panel data setup
  • From: "Tong, Tingting" <[email protected]>
• st: psmatch2 with exact matching
  • From: Charles Stoecker <[email protected]>
• RE: st: Panel unit root test
  • From: "Tong, Tingting" <[email protected]>
• RE: st: Panel unit root test
  • From: Nick Cox <[email protected]>
• Re: st: Panel unit root test
  • From: Muhammad Anees <[email protected]>
• st: Panel unit root test
  • From: "Tong, Tingting" <[email protected]>
• st: RE: post regression diagnostic ztnb
  • From: Nick Cox <[email protected]>
• st: post regression diagnostic ztnb
  • From: sara balestri <[email protected]>
• st: RE: Probability and non-response weights; how can I create a composite weight?
  • From: "Scholes, Shaun" <[email protected]>
• RE: st: destring ignores more than what specified in ignore()
  • From: Nick Cox <[email protected]>
• RE: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• RE: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: David Ashcraft <[email protected]>
• Re: st: twoway rspike legend too thin
  • From: Nick Cox <[email protected]>
• Re: st: Numbers with decimals and -float- command
  • From: Joseph Monte <[email protected]>
• Re: st: destring ignores more than what specified in ignore()
  • From: Nick Cox <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Barbro Widerstedt <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: John Luke Gallup <[email protected]>
• st: destring ignores more than what specified in ignore()
  • From: "Impavido, Gregorio" <[email protected]>
• Re: st: Fitstat Command usage
  • From: Richard Williams <[email protected]>
• Re: st: ma(1) model, cannot explain the predicted values
  • From: Tirthankar Chakravarty <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• st: Fitstat Command usage
  • From: "Polloni Stefano" <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• st: twoway rspike legend too thin
  • From: [email protected] (Brendan Halpin)
• Re: st: ma(1) model, cannot explain the predicted values
  • From: [email protected]
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• Re: st: Conditional infile statements
  • From: Steven Samuels <[email protected]>
• Re: st: Conditional infile statements
  • From: David Kantor <[email protected]>
• Re: st: Conditional infile statements
  • From: Nick Cox <[email protected]>
• st: Conditional infile statements
  • From: Gordon Hughes <[email protected]>
• Re: st: means compairison with weights and unequal variance
  • From: Nick Cox <[email protected]>
• Re: st: ma(1) model, cannot explain the predicted values
  • From: Tirthankar Chakravarty <[email protected]>
• st: means compairison with weights and unequal variance
  • From: appoloniak <[email protected]>
• st: ma(1) model, cannot explain the predicted values
  • From: [email protected]
• Re: st: tabulate produces inconsistent output?
  • From: Richard Williams <[email protected]>
• st: tabulate produces inconsistent output?
  • From: Christian Raschke <[email protected]>
• st: New packages -margprev- and -marglmean- on SSC
  • From: "Roger B. Newson" <[email protected]>
• re:st: Is there a way to center factor variables
  • From: Christopher Baum <[email protected]>
• re:re:st: Is there a way to center factor variables
  • From: Christopher Baum <[email protected]>
• st: Is there a way to center factor variables
  • From: Sami Alameen <[email protected]>
• Re: Re: Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• Re: Re: Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• re:Re: Re: st: RE: dfuller: why do I get different results?
  • From: Christopher Baum <[email protected]>
• Re: Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• Re: st: Re: Finding Maximum of a series
  • From: Nick Cox <[email protected]>
• Re: Re: st: RE: dfuller: why do I get different results?
  • From: Nick Cox <[email protected]>
• Re: st: Re: Finding Maximum of a series
  • From: Nick Cox <[email protected]>
• Re: st: Re: Finding Maximum of a series
  • From: Nick Cox <[email protected]>
• Re: Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• re:st: Finding Maximum of a series
  • From: Christopher Baum <[email protected]>
• re:st: Re: Finding Maximum of a series
  • From: Christopher Baum <[email protected]>
• Re: st: Re: Finding Maximum of a series
  • From: Tirthankar Chakravarty <[email protected]>
• Re: Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• st: Re: Finding Maximum of a series
  • From: ajjee <[email protected]>
• Re: Re: st: RE: dfuller: why do I get different results?
  • From: Christopher Baum <[email protected]>
• Re: RE: Re:st: xtpcse - "no time periods are common to all panels"
  • From: Christopher Baum <[email protected]>
• Re: st: Finding Maximum of a series
  • From: Tirthankar Chakravarty <[email protected]>
• Re: st: Finding Maximum of a series
  • From: Muhammad Anees <[email protected]>
• st: Finding Maximum of a series
  • From: ajjee <[email protected]>
• Re: st: RE: new package margdistfit available on SSC
  • From: Maarten Buis <[email protected]>
• Re: st: RE: new package margdistfit available on SSC
  • From: David Ashcraft <[email protected]>
• RE: st: Saving datasets temporarily - switching back and forth between two datasets
  • From: "David Radwin" <[email protected]>
• Re: st: Saving datasets temporarily - switching back and forth between two datasets
  • From: Phil Clayton <[email protected]>
• Re: st: xtlogit=logit, cluster(pid) ??
  • From: Richard Williams <[email protected]>
• st: Saving datasets temporarily - switching back and forth between two datasets
  • From: "Ben Hoen" <[email protected]>
• Re: st: RE: When to use stdize and stdweight with svy: tab and svy: mean?
  • From: Arturo Rodriguez <[email protected]>
• st: bug in areg when using lag notation
  • From: Tatyana Deryugina <[email protected]>
• st: Probability and non-response weights; how can I create a composite weight?
  • From: Arturo Rodriguez <[email protected]>
• Re: st: xtlogit=logit, cluster(pid) ??
  • From: Joerg Luedicke <[email protected]>
• Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• st: xtlogit=logit, cluster(pid) ??
  • From: Ladislav Kozak <[email protected]>
• Re: st: back transform coefficients
  • From: Nikolaos Pandis <[email protected]>
• st: RE: decimal points after tabulate,summarise( )
  • From: Nick Cox <[email protected]>
• Re: st: decimal points after tabulate,summarise( )
  • From: Muhammad Anees <[email protected]>
• st: decimal points after tabulate,summarise( )
  • From: Nikolaos Pandis <[email protected]>
• Re: st: .tab list showing numbers in exponential form. Can that be changed?
  • From: Muhammad Anees <[email protected]>
• Re: st: .tab list showing numbers in exponential form. Can that be changed?
  • From: Muhammad Anees <[email protected]>
• st: RE: .tab list showing numbers in exponential form. Can that be changed?
  • From: Nick Cox <[email protected]>
• Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• st: RE: graphic observed means and confidence intervals over time
  • From: Nick Cox <[email protected]>
• st: RE: How to cite a macro in ODBC's SQL select statement
  • From: Nick Cox <[email protected]>
• st: graphic observed means and confidence intervals over time
  • From: Lloyd Dumont <[email protected]>
• RE: st: RE: dfuller: why do I get different results?
  • From: Nick Cox <[email protected]>
• st: How to cite a macro in ODBC's SQL select statement
  • From: "G. Dai" <[email protected]>
• Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• Re: st: RE: new package margdistfit available on SSC
  • From: Maarten Buis <[email protected]>
• Re:st: RE: marginal effects interaction and squared variables ordered probit
  • From: Richard Williams <[email protected]>
• Re: st: way to control for repeated measures when using svy: commands?
  • From: "Lima, Julie" <[email protected]>
• st: .tab list showing numbers in exponential form. Can that be changed?
  • From: "Ben Hoen" <[email protected]>
• st: Intermittent crash: opening Data Editor, using SSH X-forwarding
  • From: Dave Ewart <[email protected]>
• Re: st: RE: new package margdistfit available on SSC
  • From: Austin Nichols <[email protected]>
• st: new version hangroot available from SSC
  • From: Maarten Buis <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• st: RE: new package margdistfit available on SSC
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: back transform coefficients
  • From: Richard Goldstein <[email protected]>
• RE: Re:st: xtpcse - "no time periods are common to all panels"
  • From: Nick Cox <[email protected]>
• RE: st: RE: dfuller: why do I get different results?
  • From: Nick Cox <[email protected]>
• Re: st: RE: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• Re:st: xtpcse - "no time periods are common to all panels"
  • From: Christopher Baum <[email protected]>
• Re: st: back transform coefficients
  • From: Nikolaos Pandis <[email protected]>
• st: bootstrap p-value and predictions
  • From: Shehzad Ali <[email protected]>
• RE: Re:st: RE: marginal effects interaction and squared variables ordered probit
  • From: Nick Cox <[email protected]>
• SV: st: problems with nlsur aids
  • From: Mintewab Bezabih <[email protected]>
• RE: st: back transform coefficients
  • From: Nick Cox <[email protected]>
• Re:st: RE: marginal effects interaction and squared variables ordered probit
  • From: Vincenzo Carrieri <[email protected]>
• Re: st: back transform coefficients
  • From: Nikolaos Pandis <[email protected]>
• st: RE: dfuller: why do I get different results?
  • From: Nick Cox <[email protected]>
• st: dfuller: why do I get different results?
  • From: Yuval Arbel <[email protected]>
• st: RE: When to use stdize and stdweight with svy: tab and svy: mean?
  • From: "Scholes, Shaun" <[email protected]>
• Re: st: RE: expanding observations
  • From: behailu ayele <[email protected]>
• st: RE: expanding observations
  • From: Nick Cox <[email protected]>
• Re: st: back transform coefficients
  • From: Maarten Buis <[email protected]>
• st: understanding the -asis()- option in -stsplit-
  • From: "Jesper Lindhardsen" <[email protected]>
• st: expanding observations
  • From: behailu ayele <[email protected]>
• st: new package margdistfit available on SSC
  • From: Maarten Buis <[email protected]>
• Re: st: Average when -inrange()-
  • From: Joseph Monte <[email protected]>
• st: back transform coefficients
  • From: Nikolaos Pandis <[email protected]>
• Re: st: Average when -inrange()-
  • From: Nick Cox <[email protected]>
• Re: st: Average when -inrange()-
  • From: Joseph Monte <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Yuval Arbel <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Yuval Arbel <[email protected]>
• Re: st: Streg (gamma): discontinuous region encountered
  • From: Maarten Buis <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Nick Cox <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Muhammad Anees <[email protected]>
• Re: st: Bootstrap to compare ROC area on imputed dataset
  • From: roland andersson <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Yuval Arbel <[email protected]>
• Re: st: R2's from xtreg
  • From: Daifeng He <[email protected]>
• Re: st: way to control for repeated measures when using svy: commands?
  • From: Steven Samuels <[email protected]>
• RE: st: RE: automatic disclosure in tables
  • From: Roberto De Miguel <[email protected]>
• Re: st: Numbers with decimals and -float- command
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: Replacing the missing observations
  • From: Nick Cox <[email protected]>
• Re: st: Average when -inrange()-
  • From: Nick Cox <[email protected]>
• st: RE: RE: Replacing the missing observations
  • From: "Gokhan Yilmaz" <[email protected]>
• st: When to use stdize and stdweight with svy: tab and svy: mean?
  • From: Arturo Rodriguez <[email protected]>
• st: Average when -inrange()-
  • From: Joseph Monte <[email protected]>
• st: Streg (gamma): discontinuous region encountered
  • From: Jana von Stein <[email protected]>
• Re: st: Numbers with decimals and -float- command
  • From: Joseph Monte <[email protected]>
• RE: st: Bootstrap to compare ROC area on imputed dataset
  • From: Cameron McIntosh <[email protected]>
• Re: st: mlogit using pweight
  • From: Stas Kolenikov <[email protected]>
• Re: st: mlogit using pweight
  • From: Richard Williams <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Yuval Arbel <[email protected]>
• st: mlogit using pweight
  • From: "Polloni Stefano" <[email protected]>
• st: using xtlogit for a model with more than 2 levels?
  • From: Hayley Gershengorn <[email protected]>
• RE: st: Identifying the best scale without a "gold standard"
  • From: Cameron McIntosh <[email protected]>
• RE: st: unrecognized command: _anovaparse
  • From: Nick Cox <[email protected]>
• st: RE: marginal effects interaction and squared variables ordered probit
  • From: Nick Cox <[email protected]>
• st: xtpcse - "no time periods are common to all panels"
  • From: Wayne Sandholtz <[email protected]>
• RE: st: unrecognized command: _anovaparse
  • From: Tim Evans <[email protected]>
• st: Bootstrap to compare ROC area on imputed dataset
  • From: roland andersson <[email protected]>
• RE: st: unrecognized command: _anovaparse
  • From: Tim Evans <[email protected]>
• Re: st: unrecognized command: _anovaparse
  • From: Nick Cox <[email protected]>
• st: marginal effects interaction and squared variables ordered probit
  • From: Vincenzo Carrieri <[email protected]>
• st: unrecognized command: _anovaparse
  • From: Tim Evans <[email protected]>
• Re: st: U - Statistics Kernel of order 3
  • From: "Roger B. Newson" <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Austin Nichols <[email protected]>
• Re: st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Muhammad Anees <[email protected]>
• Re: st: R2's from xtreg
  • From: Christopher Baum <[email protected]>
• st: How to generate a table with the outcomes of unit-root tests from unbalanced panel?
  • From: Yuval Arbel <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: "Seed, Paul" <[email protected]>
• st: RE: U - Statistics Kernel of order 3
  • From: Nick Cox <[email protected]>
• st: U - Statistics Kernel of order 3
  • From: David Ashcraft <[email protected]>
• st: RE: Looping over observations
  • From: Nick Cox <[email protected]>
• RE: st: -xthtaylor- by hand or using -xtivreg2-
  • From: "Schaffer, Mark E" <[email protected]>
• st: Looping over observations
  • From: Albert Navarro <[email protected]>
• RE: st: regular expression or some simpler data extraction method
  • From: Nick Cox <[email protected]>
• RE: st: Identifying the best scale without a "gold standard"
  • From: Nick Cox <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: Ronan Conroy <[email protected]>
• RE: st: transpose of column of a data to row
  • From: Nick Cox <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Nick Cox <[email protected]>
• st: RE: line graph
  • From: Nick Cox <[email protected]>
• Re: st: R2's from xtreg
  • From: daniel klein <[email protected]>
• st: Update to -survsim- on SSC
  • From: "Crowther, Michael J." <[email protected]>
• Re: st: -xthtaylor- by hand or using -xtivreg2-
  • From: "M.M. Kramer" <[email protected]>
• st: line graph
  • From: A. Berâ <[email protected]>
• st: New command stpm2cif on SSC
  • From: "Hinchliffe, Sally R." <[email protected]>
• st: how to run -nbreg- or-poisson-regression with -cluster-option by two dimensions?
  • From: Ye SUN <[email protected]>
• st: RE: Re: syntax help
  • From: "Hardy, Dale S" <[email protected]>
• st: way to control for repeated measures when using svy: commands?
  • From: "Lima, Julie" <[email protected]>
• st: R2's from xtreg
  • From: Daifeng He <[email protected]>
• st: Re: syntax help
  • From: "Joseph Coveney" <[email protected]>
• st: syntax help
  • From: "Hardy, Dale S" <[email protected]>
• Re: st: quick question : survival curves with pweighted data in Stata 12
  • From: László Sándor <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Ian Li <[email protected]>
• st: quick question : survival curves with pweighted data in Stata 12
  • From: László Sándor <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: "Teubner, David (Health)" <[email protected]>
• st: Fracpoly hangs in Mac OS X version of Stata 11
  • From: Steve Harris <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: Cameron McIntosh <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: Stas Kolenikov <[email protected]>
• st: ubsubscribe
  • From: Lena Fredriksson <[email protected]>
• Re: st: transpose of column of a data to row
  • From: daniel klein <[email protected]>
• st: transpose of column of a data to row
  • From: saqlain raza <[email protected]>
• RE: st: regular expression or some simpler data extraction method
  • From: "Ben Hoen" <[email protected]>
• Re: st: regular expression or some simpler data extraction method
  • From: "Ben Hoen" <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Robert Picard <[email protected]>
• Re: st: regular expression or some simpler data extraction method
  • From: [email protected] (Brendan Halpin)
• Re: st: Reading multiple .csvs from a folder
  • From: Matthew White <[email protected]>
• Re: st: regular expression or some simpler data extraction method
  • From: Matthew White <[email protected]>
• st: Reading multiple .csvs from a folder
  • From: Vianney <[email protected]>
• Re: st: regular expression or some simpler data extraction method
  • From: Matthew White <[email protected]>
• Re: st: -local- problem
  • From: Phil Clayton <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Richard Herron <[email protected]>
• st: regular expression or some simpler data extraction method
  • From: "Ben Hoen" <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: Cameron McIntosh <[email protected]>
• RE: st: RE: automatic disclosure in tables
  • From: Nick Cox <[email protected]>
• RE: st: Creating dummy variables
  • From: Michael Betz <[email protected]>
• Re: st: RE: automatic disclosure in tables
  • From: Nick Winter <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Stas Kolenikov <[email protected]>
• Re: st: Creating dummy variables
  • From: Matthew White <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Richard Herron <[email protected]>
• RE: st: Equivalent of Excel's COUNTIF
  • From: Nick Cox <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Richard Herron <[email protected]>
• RE: st: RE: automatic disclosure in tables
  • From: Nick Cox <[email protected]>
• Re: st: RE: Axis with scatter plots
  • From: Andrew Stoddart <[email protected]>
• RE: st: Creating dummy variables
  • From: Michael Betz <[email protected]>
• Re: st: RE: automatic disclosure in tables
  • From: Austin Nichols <[email protected]>
• RE: st: RE: -local- problem
  • From: Nick Cox <[email protected]>
• st: RE: Axis with scatter plots
  • From: Nick Cox <[email protected]>
• Re: st: RE: -local- problem
  • From: saqlain raza <[email protected]>
• st: Axis with scatter plots
  • From: Andrew Stoddart <[email protected]>
• Re: st: RE: -local- problem
  • From: Fernando Rios Avila <[email protected]>
• Re: st: RE: -local- problem
  • From: saqlain raza <[email protected]>
• Re: st: RE: nl-function log4-formula
  • From: Jennyfer Wolf <[email protected]>
• st: RE: -local- problem
  • From: Nick Cox <[email protected]>
• Re: st: RE: nl-function log4-formula
  • From: "Brian P. Poi" <[email protected]>
• st: -local- problem
  • From: saqlain raza <[email protected]>
• Re: st: Creating dummy variables
  • From: Matthew White <[email protected]>
• RE: st: RE: nl-function log4-formula
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• Re:Re: st: how to keep the pictures
  • From: conantiancai_stata <[email protected]>
• Re: st: characters in the title of a graph
  • From: Bulent Koksal <[email protected]>
• Re: st: how to keep the pictures
  • From: Maarten Buis <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: Fernando Rios Avila <[email protected]>
• st: how to keep the pictures
  • From: conantiancai_stata <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: Fernando Rios Avila <[email protected]>
• Re: st: unit variance command with mprobit
  • From: Maarten Buis <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: "Seed, Paul" <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: Nick Cox <[email protected]>
• RE: st: RE: nl-function log4-formula
  • From: Nick Cox <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: [email protected] (Brendan Halpin)
• Re: st: RE: nl-function log4-formula
  • From: Jennyfer Wolf <[email protected]>
• st: RE: Graphing medians with xtgraph bug
  • From: Nick Cox <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: Nick Cox <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: Yuval Arbel <[email protected]>
• RE: st: Combining strings by group
  • From: Nick Cox <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: [email protected] (Brendan Halpin)
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• Re: st: Combining strings by group
  • From: daniel klein <[email protected]>
• st: RE: nl-function log4-formula
  • From: Nick Cox <[email protected]>
• st: RE: Replacing the missing observations
  • From: Nick Cox <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: Jennyfer Wolf <[email protected]>
• st: nl-function log4-formula
  • From: Jennyfer Wolf <[email protected]>
• st: RE: automatic disclosure in tables
  • From: Nick Cox <[email protected]>
• RE: st: FW: ML for logit/ologit
  • From: Nick Cox <[email protected]>
• RE: st: Combining strings by group
  • From: Nick Cox <[email protected]>
• Re: st: FW: ML for logit/ologit
  • From: Yuval Arbel <[email protected]>
• st: FW: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• Re: st: Combining strings by group
  • From: daniel klein <[email protected]>
• st: characters in the title of a graph
  • From: Bulent Koksal <[email protected]>
• st: Combining strings by group
  • From: "Ben Hoen" <[email protected]>
• st: graph bar multiple-line labels odd behavior when label includes operator
  • From: dr kardos laszlo <[email protected]>
• st: Creating dummy variables
  • From: Michael Betz <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Ian Li <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: "Kieran McCaul" <[email protected]>
• st: newey, by and nwest
  • From: [email protected]
• st: Replacing the missing observations
  • From: [email protected]
• Re: st: RE: twoway graph legend
  • From: Nikolaos Pandis <[email protected]>
• re: st: xtpcse - "no time periods are common to all panels"
  • From: Christopher Baum <[email protected]>
• Re: st: Quantum mechanics in Stata
  • From: Stas Kolenikov <[email protected]>
• st: automatic disclosure in tables
  • From: "percy" <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: Equivalent of Excel's COUNTIF
  • From: Stas Kolenikov <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: "CJ Lan" <[email protected]>
• Re: st: loop
  • From: Carlos Aller <[email protected]>
• Re: st: RE: Programmatically access graph scheme colour list?
  • From: [email protected] (Brendan Halpin)
• st: Graphing medians with xtgraph bug
  • From: <[email protected]>
• st: Equivalent of Excel's COUNTIF
  • From: "Teubner, David (Health)" <[email protected]>
• Re: st: Quantum mechanics in Stata
  • From: Stas Kolenikov <[email protected]>
• st: unit variance command with mprobit
  • From: saqlain raza <[email protected]>
• Re: st: loop
  • From: Matthew White <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• Re: st: xtpcse - "no time periods are common to all panels"
  • From: Gordon Hughes <[email protected]>
• st: RE: xtpcse - "no time periods are common to all panels"
  • From: Nick Cox <[email protected]>
• st: Fwd: Heckman twostep: Goodness of fit and selection between nested models?
  • From: Lena Fredriksson <[email protected]>
• st: xtpcse - "no time periods are common to all panels"
  • From: Wayne Sandholtz <[email protected]>
• RE: st: RE: Test of differences between geometric means
  • From: Nick Cox <[email protected]>
• Subject: st: simulating random numbers from zero inflated negative binomial estimates
  • From: [email protected]
• RE: st: RE: Test of differences between geometric means
  • From: Nick Cox <[email protected]>
• Re: st: RE: twoway graph legend
  • From: Nick Winter <[email protected]>
• RE: st: RE: twoway graph legend
  • From: Nick Cox <[email protected]>
• Re: st: RE: Test of differences between geometric means
  • From: Junlin Liao <[email protected]>
• st: RE: Programmatically access graph scheme colour list?
  • From: Nick Cox <[email protected]>
• Re: st: loop
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: RE: RE: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• st: loop
  • From: Carlos Aller <[email protected]>
• st: RE: ML for logit/ologit
  • From: "David Radwin" <[email protected]>
• st: ML for logit/ologit
  • From: "Thomas Murray (Department of Economics)" <[email protected]>
• Re: st: RE: twoway graph legend
  • From: Nikolaos Pandis <[email protected]>
• st: useregistrystartin switch and working directory
  • From: "Hoffman, George" <[email protected]>
• st: Programmatically access graph scheme colour list?
  • From: [email protected] (Brendan Halpin)
• st: RE: twoway graph legend
  • From: Nick Cox <[email protected]>
• st: twoway graph legend
  • From: Nikolaos Pandis <[email protected]>
• st: RE: Xtgraph without error bars
  • From: Nick Cox <[email protected]>
• st: Xtgraph without error bars
  • From: <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: RE: RE: Difference of values in the same column/variable
  • From: "Gokhan Yilmaz" <[email protected]>
• Re: st: RE: submatrix, Thanks Nick!
  • From: behailu ayele <[email protected]>
• st: RE: how to transform variables again!
  • From: Nick Cox <[email protected]>
• st: how to transform variables again!
  • From: econqian <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• st: RE: RE: how to transform variables
  • From: "Qian Yu" <[email protected]>
• Re: st: how to transform variables
  • From: daniel klein <[email protected]>
• RE: st: RE: submatrix
  • From: Nick Cox <[email protected]>
• st: RE: how to transform variables
  • From: Nick Cox <[email protected]>
• st: how to transform variables
  • From: econqian <[email protected]>
• Re: st: RE: submatrix
  • From: behailu ayele <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: "Seed, Paul" <[email protected]>
• RE: st: RE: submatrix
  • From: Nick Cox <[email protected]>
• Re: st: RE: submatrix
  • From: behailu ayele <[email protected]>
• RE: st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• st: RE: submatrix
  • From: Nick Cox <[email protected]>
• st: RE: RE: Logit using geometric means
  • From: Nick Cox <[email protected]>
• Re: st: Identifying the best scale without a "gold standard"
  • From: Ronan Conroy <[email protected]>
• st: RE: Difference of values in the same column/variable
  • From: Nick Cox <[email protected]>
• st: RE: Test of differences between geometric means
  • From: Nick Cox <[email protected]>
• st: submatrix
  • From: behailu ayele <[email protected]>
• st: Treatment effect models with an ordered categorical outcome variable in the second stage
  • From: "Breanna Pellegrini" <[email protected]>
• Re: st: a model that runs in LISREL, but not in Stata 12. Any suggestions?
  • From: Stas Kolenikov <[email protected]>
• st: RE: Logit using geometric means
  • From: "Kieran McCaul" <[email protected]>
• st: strange "not sorted" error
  • From: Tatyana Deryugina <[email protected]>
• st: Difference of values in the same column/variable
  • From: [email protected]
• Re: st: xtpoisson -- error
  • From: Ivan Png <[email protected]>
• Re: st: xtpoisson -- error
  • From: Richard Williams <[email protected]>
• Re: st: xtpoisson -- error
  • From: Richard Williams <[email protected]>
• st: xtpoisson -- error
  • From: Ivan Png <[email protected]>
• st: Stata 12 performance issues
  • From: Nicole Johnson <[email protected]>
• RE: st: Identifying the best scale without a "gold standard"
  • From: "Seed, Paul" <[email protected]>
• st: Logit using geometric means
  • From: <[email protected]>
• st: Test of differences between geometric means
  • From: <[email protected]>
• Re: st: Quantum mechanics in Stata
  • From: Stas Kolenikov <[email protected]>
• st: Quantum mechanics in Stata
  • From: Nick Cox <[email protected]>
• st: Block Recursive Equation
  • From: Brent Evans <[email protected]>
• RE: st: Bias corrected p-values after bootstrap
  • From: Nick Cox <[email protected]>
• RE: st: Bias corrected p-values after bootstrap
  • From: "David Radwin" <[email protected]>
• Re: st: Bias corrected p-values after bootstrap
  • From: Sunday Clark <[email protected]>
• Re: st: RE: How to drop observations
  • From: natasha agarwal <[email protected]>
• st: RE: How to drop observations
  • From: Nick Cox <[email protected]>
• st: How to drop observations
  • From: natasha agarwal <[email protected]>
• st: a model that runs in LISREL, but not in Stata 12. Any suggestions?
  • From: Jonathan Richards <[email protected]>
• st: RE: Curve fitting with nl log4, how to put constraints on parameters
  • From: Nick Cox <[email protected]>
• st: FW: Standard error estimates lincom vs. estimates from predict command
  • From: a b <[email protected]>
• Re: st: xtmixed for repeated measures
  • From: Philip Ender <[email protected]>
• st: simulating random numbers from zero inflated negative binomial estimates
  • From: Daniel Hill-McManus <[email protected]>
• Re: st: model specification
  • From: William Buchanan <[email protected]>
• Re: st: model specification
  • From: Jet <[email protected]>
• st: Curve fitting with nl log4, how to put constraints on parameters
  • From: Jennyfer Wolf <[email protected]>
• Re: st: RE: bootstrap gives errors with -rd-
  • From: Austin Nichols <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Nick Cox <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Richard Williams <[email protected]>
• st: Forecasting
  • From: "Victor Zammit" <[email protected]>
• Re: st: RE: ologit models with weights errors
  • From: abby schwartz <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Nick Cox <[email protected]>
• Re: st: RE: ologit models with weights errors
  • From: Richard Williams <[email protected]>
• Re: st: ologit models with weights errors
  • From: Richard Williams <[email protected]>
• st: RE: ologit models with weights errors
  • From: Nick Cox <[email protected]>
• Re: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Richard Williams <[email protected]>
• RE: st: Endogeneity and Panel Data : treatreg, ivregress or .. ? Any suggestion would be really appreciated !
  • From: Cameron McIntosh <[email protected]>
• st: ologit models with weights errors
  • From: abby schwartz <[email protected]>
• st: Re: Normal CDF
  • From: Christopher Baum <[email protected]>
• Re: st: RE: Normal CDF
  • From: Carlos Aller <[email protected]>
• Re: st: Endogeneity and Panel Data : treatreg, ivregress or .. ? Any suggestion would be really appreciated !
  • From: John Litfiba <[email protected]>
• st: RE: Normal CDF
  • From: Nick Cox <[email protected]>
• st: RE: Understanding the mechanics of the sum() function
  • From: Nick Cox <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Nick Cox <[email protected]>
• Re: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Muhammad Anees <[email protected]>
• RE: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Ian Li <[email protected]>
• Re: st: Multinomial Logit Model - Cramer Ridder Test
  • From: Muhammad Anees <[email protected]>
• st: Multinomial Logit Model - Cramer Ridder Test
  • From: Ian Li <[email protected]>
• RE: st: Endogeneity and Panel Data : treatreg, ivregress or .. ? Any suggestion would be really appreciated !
  • From: Cameron McIntosh <[email protected]>
• st: xtmixed for repeated measures
  • From: Carrie Petrucci <[email protected]>
• RE: st: model specification
  • From: Cameron McIntosh <[email protected]>
• st: Re: multistage sample survey and coding
  • From: r <[email protected]>
• st: Understanding the mechanics of the sum() function
  • From: Billy Schwartz <[email protected]>
• Re: reL Re: st: Interpreting mediation model sobel goodman test
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: Re: Challenging foreach problem
  • From: [email protected]
• Re: st: Applying specific aweight to each explanatory variable
  • From: Steven Samuels <[email protected]>
• Re: st: RE: rearranging cross-section to longitudinal cross-section
  • From: "Kristen Shorette" <[email protected]>
• Re: st: rearranging cross-section to longitudinal cross-section
  • From: Ladislav Kozak <[email protected]>
• st: RE: rearranging cross-section to longitudinal cross-section
  • From: "Steve Martin" <[email protected]>
• st: rearranging cross-section to longitudinal cross-section
  • From: "Kristen Shorette" <[email protected]>
• st: coldiag and pertub
  • From: William Hauser <[email protected]>
• st: Normal CDF
  • From: Carlos Aller <[email protected]>
• st: Loop for survey data
  • From: ajjee <[email protected]>
• st: model specification
  • From: Jet <[email protected]>
• RE: reL Re: st: Interpreting mediation model sobel goodman test
  • From: "Ariel Linden, DrPH" <[email protected]>
• st: Endogeneity and Panel Data : treatreg, ivregress or .. ? Any suggestion would be really appreciated !
  • From: John Litfiba <[email protected]>
• st: Re: Challenging foreach problem
  • From: daniel klein <[email protected]>
• st: Re: Challenging foreach problem
  • From: daniel klein <[email protected]>
• Re: st: RE: bootstrap gives errors with -rd-
  • From: D-Ta <[email protected]>
• st: the newey2, number of lags and by function
  • From: [email protected]
• Re: st: Applying specific aweight to each explanatory variable
  • From: Steven Samuels <[email protected]>
• st: Challenging foreach problem
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: Applying specific aweight to each explanatory variable
  • From: Austin Nichols <[email protected]>
• Re: st: RE: bootstrap gives errors with -rd-
  • From: Austin Nichols <[email protected]>
• Re: st: Applying specific aweight to each explanatory variable
  • From: Steven Samuels <[email protected]>
• Re: st: question about defining a local
  • From: Phil Schumm <[email protected]>
• Re: st: question about defining a local
  • From: Daifeng He <[email protected]>
• Re: st: question about defining a local
  • From: Phil Schumm <[email protected]>
• st: question about defining a local
  • From: Daifeng He <[email protected]>
• RE: reL Re: st: Interpreting mediation model sobel goodman test
  • From: Cameron McIntosh <[email protected]>
• SV: st: problems with nlsur aids
  • From: Mintewab Bezabih <[email protected]>
• Re: st: RE: bootstrap gives errors with -rd-
  • From: D-Ta <[email protected]>
• Re: reL Re: st: Interpreting mediation model sobel goodman test
  • From: John Antonakis <[email protected]>
• st: Applying specific aweight to each explanatory variable
  • From: <[email protected]>
• Re: st: pooled OLS
  • From: Richard Williams <[email protected]>
• Re: st: RE: identify family members using -egen (group)
  • From: Amanda Fu <[email protected]>
• Re: st: pooled OLS
  • From: William Buchanan <[email protected]>
• st: pooled OLS
  • From: "donsaane" <[email protected]>
• st: interpretating xtmixed as decomposition
  • From: "Lim, Raymond" <[email protected]>
• st: RE: bootstrap gives errors with -rd-
  • From: Nick Cox <[email protected]>
• st: bootstrap gives errors with -rd-
  • From: D-Ta <[email protected]>
• Re: st: problem with the mlogtest command
  • From: Richard Williams <[email protected]>
• Re: st: problem with the mlogtest command
  • From: Richard Williams <[email protected]>
• Re: st: problem with the mlogtest command
  • From: Muhammad Anees <[email protected]>
• st: problem with the mlogtest command
  • From: Miranda <[email protected]>
• Re: st: about the listcoef command
  • From: Richard Williams <[email protected]>
• st: about the listcoef command
  • From: Miranda <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: William Buchanan <[email protected]>
• st: xtabond and xtabond2
  • From: Alice <[email protected]>
• Re: st: handling dates to find latest date from multiple records
  • From: Nick Cox <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: Richard Williams <[email protected]>
• st: handling dates to find latest date from multiple records
  • From: Sunday Clark <[email protected]>
• Re: st: ICD10 command similar to ICD9
  • From: Nick Cox <[email protected]>
• st: ICD10 command similar to ICD9
  • From: Alexey Shpenev <[email protected]>
• Re: st: RE: RE: -nlsur- AIDS
  • From: "Brian P. Poi" <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: Donna L Quadri <[email protected]>
• Re: st: opposite sign of one of the independent variables
  • From: David Hoaglin <[email protected]>
• Re: st: Machine spec for 70GB data, Summary
  • From: George Leckie <[email protected]>
• RE: st: Identifying the best scale without a "gold standard"
  • From: Cameron McIntosh <[email protected]>
• RE: st: RE: opposite sign of one of the independent variables
  • From: Cameron McIntosh <[email protected]>
• st: Identifying the best scale without a "gold standard"
  • From: "Seed, Paul" <[email protected]>
• st: MLE Estimation of Poisson process
  • From: <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• RE: st: * mark indicating between group significans in box plots
  • From: Nick Cox <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: "Seed, Paul" <[email protected]>
• RE: st: loop within a loop
  • From: Nick Cox <[email protected]>
• st: RE: identify family members using -egen (group)
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: "Ivica Rubil" <[email protected]>
• RE: st: Ado File for MI Estimation Stata 12
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: Nick Cox <[email protected]>
• st: RE: opposite sign of one of the independent variables
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: "Ivica Rubil" <[email protected]>
• st: XTOVERID after XTHTAYLOR Warning - endogenous variable(s) collinear with instruments, 3200 conformability error, and other errors
  • From: "M.M. Kramer" <[email protected]>
• st: opposite sign of one of the independent variables
  • From: Deepti Garg <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: Donna L Quadri <[email protected]>
• st: identify family members using -egen (group)
  • From: Amanda Fu <[email protected]>
• Re: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Natasha Xingyuan Che <[email protected]>
• Re: st: qui { svy : } bug?
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• st: find the most preferable combination among strings
  • From: Daniel Marcelino <[email protected]>
• Re: st: svy + aweights
  • From: Stas Kolenikov <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: svy + aweights
  • From: Stas Kolenikov <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: svy + aweights
  • From: Joerg Luedicke <[email protected]>
• Re: st: loop within a loop
  • From: Matthew White <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: loop within a loop
  • From: Steve Nakoneshny <[email protected]>
• Re: st: loop within a loop
  • From: Matthew White <[email protected]>
• Re: st: svy + aweights
  • From: Stas Kolenikov <[email protected]>
• st: loop within a loop
  • From: Steve Nakoneshny <[email protected]>
• Re: st: svy + aweights
  • From: Joerg Luedicke <[email protected]>
• st: qui { svy : } bug?
  • From: Jeph Herrin <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: svy + aweights
  • From: Joerg Luedicke <[email protected]>
• Re: st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: Grouped Tobit
  • From: Austin Nichols <[email protected]>
• RE: st: Ado File for MI Estimation Stata 12
  • From: Nick Cox <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: Donna L Quadri <[email protected]>
• Re: st: Ado File for MI Estimation Stata 12
  • From: Richard Williams <[email protected]>
• Re: st: svy + aweights
  • From: Stas Kolenikov <[email protected]>
• st: svy + aweights
  • From: Jeph Herrin <[email protected]>
• Re: st: Applying specific aweight to each explanatory variable
  • From: Austin Nichols <[email protected]>
• st: Ado File for MI Estimation Stata 12
  • From: Donna L Quadri <[email protected]>
• Re: st: findit -collin-
  • From: Lars Folkestad <[email protected]>
• Re: st: findit -collin-
  • From: Lars Folkestad <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Ronan Conroy <[email protected]>
• Re: st: findit -collin-
  • From: Joerg Luedicke <[email protected]>
• Re: st: findit -collin-
  • From: Muhammad Anees <[email protected]>
• Re: st: findit -collin-
  • From: Lars Folkestad <[email protected]>
• Re: st: findit -collin-
  • From: Joerg Luedicke <[email protected]>
• RE: st: RE: Error? xtdpdsys assigns explanatory power to fixed effects
  • From: "Gustavo Sanchez" <[email protected]>
• Re: st: testing for bimodality in survey data
  • From: Joerg Luedicke <[email protected]>
• st: pooled OLS
  • From: donsaane dontsi <[email protected]>
• reL Re: st: Interpreting mediation model sobel goodman test
  • From: "Ariel Linden, DrPH" <[email protected]>
• RE: st: * mark indicating between group significans in box plots
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: -nlsur- AIDS
  • From: "Brian P. Poi" <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: Nick Cox <[email protected]>
• Re: st: Heckman model with gllamm and ordinal/multinomial response
  • From: Stas Kolenikov <[email protected]>
• st: RE: Specifying line pattern in Kaplan Meier curves
  • From: Nick Cox <[email protected]>
• st: Specifying line pattern in Kaplan Meier curves
  • From: "H. Irene Su" <[email protected]>
• RE: st: RE: RE: -nlsur- AIDS
  • From: "Ivica Rubil" <[email protected]>
• st: RE: Applying specific aweight to each explanatory variable
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: -nlsur- AIDS
  • From: "Brian P. Poi" <[email protected]>
• st: findit -collin-
  • From: Lars Folkestad <[email protected]>
• st: RE: RE: -nlsur- AIDS
  • From: "Ivica Rubil" <[email protected]>
• st: Applying specific aweight to each explanatory variable
  • From: <[email protected]>
• st: Heckman model with gllamm and ordinal/multinomial response
  • From: "Silcocks, Paul" <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• RE: st: xthtaylor by hand or using xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Rsource fails after first line
  • From: Richard Herron <[email protected]>
• RE: st: * mark indicating between group significans in box plots
  • From: Nick Cox <[email protected]>
• Re: st: Rsource fails after first line
  • From: "Roger B. Newson" <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• Re: st: -nlsur- AIDS
  • From: Christian OTCHIA <[email protected]>
• Re: st: MLE Estimation of Poisson process
  • From: Sarit Weisburd <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Nick Cox <[email protected]>
• st: RE: error when generating variable in nested foreach
  • From: Nick Cox <[email protected]>
• RE: st: xthtaylor by hand or using xtivreg2
  • From: Nick Cox <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: "M.M. Kramer" <[email protected]>
• st: RE: -nlsur- AIDS
  • From: Nick Cox <[email protected]>
• st: -nlsur- AIDS
  • From: "Ivica Rubil" <[email protected]>
• st: Hodrick (1992) standard errors
  • From: Veronica Veleanu <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• Re: st: Grouped Tobit
  • From: Gordon Hughes <[email protected]>
• Re: st: * mark indicating between group significans in box plots
  • From: Nick Cox <[email protected]>
• st: R: How to index the variables' name as variable's value?
  • From: "Carlo Lazzaro" <[email protected]>
• st: error when generating variable in nested foreach
  • From: Minsoo Kim <[email protected]>
• st: * mark indicating between group significans in box plots
  • From: Lars Folkestad <[email protected]>
• st: RE: Analysing patient's admission over time
  • From: Nick Cox <[email protected]>
• RE: st: testing for bimodality in survey data
  • From: Nick Cox <[email protected]>
• st: RE: How to index the variables' name as variable's value?
  • From: Nick Cox <[email protected]>
• st: RE: RE: nlsur time series varlist
  • From: <[email protected]>
• st: How to index the variables' name as variable's value?
  • From: econqian <[email protected]>
• st: Analysing patient's admission over time
  • From: "Dudekula, Anwar" <[email protected]>
• RE: st: testing for bimodality in survey data
  • From: "Millimet, Daniel" <[email protected]>
• RE: st: testing for bimodality in survey data
  • From: Dana Shills <[email protected]>
• Re: st: RE: Error? xtdpdsys assigns explanatory power to fixed effects
  • From: Lara K <[email protected]>
• st: Rsource fails after first line
  • From: Richard Herron <[email protected]>
• Re: st: testing for bimodality in survey data
  • From: Joerg Luedicke <[email protected]>
• st: RE: polytomous logistic regression and logistic regression using weights
  • From: "CJ Lan" <[email protected]>
• st: How to incorporate initial conditions in FE models that have more than two time points
  • From: Hussain Samad <[email protected]>
• st: testing for bimodality in survey data
  • From: Dana Shills <[email protected]>
• st: testing for bimodality in survey data
  • From: Dana Shills <[email protected]>
• Re: st: equality of coefficients after ivreg
  • From: John Antonakis <[email protected]>
• st: Stata Conference 2012 in San Diego
  • From: Philip Ender <[email protected]>
• st: RE: Creating a frequency distribution from matrix
  • From: Nick Cox <[email protected]>
• st: Creating a frequency distribution from matrix
  • From: "Coffey,Daniel J" <[email protected]>
• st: RE: Error? xtdpdsys assigns explanatory power to fixed effects
  • From: [email protected]
• Re: st: Stata see host name on SSH?
  • From: Austin Nichols <[email protected]>
• st: Stata see host name on SSH?
  • From: Paul Burkander <[email protected]>
• Re: st: equality of coefficients after ivreg
  • From: Austin Nichols <[email protected]>
• st: SQREG or sqreg or qreg???
  • From: superdamy <[email protected]>
• st: Error in Stata? xtdpdsys assigns explanatory power to fixed effects
  • From: LaraKrugman <[email protected]>
• Re: Re: st: how to identify strings among which some are abbreviated andgroup strings which have the same keywords
  • From: Nina <[email protected]>
• RE: st: xtreg fixed effect
  • From: Nick Cox <[email protected]>
• Re: st: RE: how to identify strings among which some are abbreviated andgroup strings which have the same keywords
  • From: Nina <[email protected]>
• Re: st: how to identify strings among which some are abbreviated and group strings which have the same keywords
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: RE: how to identify strings among which some are abbreviated and group strings which have the same keywords
  • From: Nick Cox <[email protected]>
• st: how to identify strings among which some are abbreviated and group strings which have the same keywords
  • From: Nina <[email protected]>
• st: Choice among different heckprob models
  • From: Marco Sangiorgi <[email protected]>
• st: RE: RE: RE: RE: Robust Hausman test
  • From: Veronica Veleanu <[email protected]>
• st: RE: RE: RE: Robust Hausman test
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: xtreg fixed effect
  • From: "donsaane" <[email protected]>
• Re: st: xtreg fixed effect
  • From: Fernando Rios Avila <[email protected]>
• RE: st: xtreg fixed effect
  • From: "donsaane" <[email protected]>
• st: RE: RE: Robust Hausman test
  • From: Veronica Veleanu <[email protected]>
• st: RE: Robust Hausman test
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: age: factor variables may not contain noninteger values
  • From: Nick Cox <[email protected]>
• RE: st: age: factor variables may not contain noninteger values
  • From: "Jesper Lindhardsen" <[email protected]>
• Re: st: Looping across observations (forwards and backwards)
  • From: Pedro Nakashima <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: xtreg fixed effect
  • From: Fernando Rios Avila <[email protected]>
• RE: st: RE: Overlaying an unknown number of line graphs
  • From: Nick Cox <[email protected]>
• Re: st: RE: Overlaying an unknown number of line graphs
  • From: Colin Robert Angus <[email protected]>
• st: RE: nlsur time series varlist
  • From: Nick Cox <[email protected]>
• RE: st: how to cite Stata helpfile
  • From: "Seed, Paul" <[email protected]>
• st: nlsur time series varlist
  • From: <[email protected]>
• Re: st: Overlaying an unknown number of line graphs
  • From: Antoine Terracol <[email protected]>
• st: RE: Overlaying an unknown number of line graphs
  • From: Nick Cox <[email protected]>
• st: Overlaying an unknown number of line graphs
  • From: Colin Robert Angus <[email protected]>
• RE: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Nick Cox <[email protected]>
• st: equality of coefficients after ivreg
  • From: <[email protected]>
• Re: st: Why do -intreg- and -truncreg- not give me the same SD as -summarize- ?
  • From: "Seed, Paul" <[email protected]>
• RE: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Nick Cox <[email protected]>
• st: Stata Expert required for short freelance project
  • From: Nick Cox <[email protected]>
• RE: st: xtreg fixed effect
  • From: Nick Cox <[email protected]>
• Re: st: xtreg fixed effect
  • From: Vikram Finavker <[email protected]>
• st: How do you save the "convergence not achieved" result after -tssmooth hwinters-
  • From: Oliver Jones <[email protected]>
• Re: st: Questions about interaction terms using #.
  • From: Ulrich Kohler <[email protected]>
• Re: st: Grouped Tobit
  • From: Maarten Buis <[email protected]>
• Re: st: Zipcode Datafile
  • From: Muhammad Anees <[email protected]>
• Re: st: xtreg fixed effect
  • From: Muhammad Anees <[email protected]>
• Re: st: spmat error in stata
  • From: Yuval Arbel <[email protected]>
• st: Grouped Tobit
  • From: Jason Miller <[email protected]>
• st: Re: statalist-digest V4 #4330
  • From: Miranda <[email protected]>
• st: polytomous logistic regression and logistic regression using weights
  • From: Miranda <[email protected]>
• st: xtreg fixed effect
  • From: "donsaane" <[email protected]>
• st: Zipcode Datafile
  • From: "Dudekula, Anwar" <[email protected]>
• st: spmat error in stata
  • From: [email protected]
• st: Heckprob - Choice among nested models
  • From: Marco Sangiorgi <[email protected]>
• Re: st: Looping across observations (forwards and backwards)
  • From: Nick Cox <[email protected]>
• st: Error? xtdpdsys assigns explanatory power to fixed effects
  • From: Lara K <[email protected]>
• Re: st: Looping across observations (forwards and backwards)
  • From: Pedro Nakashima <[email protected]>
• st: RE: Re: correlations
  • From: Nick Cox <[email protected]>
• RE: st: Numbers with decimals and -float- command
  • From: Nick Cox <[email protected]>
• st: Re: correlations
  • From: Rodrigo Briceño <[email protected]>
• st: Questions about interaction terms using #.
  • From: YangSP <[email protected]>
• st: decomposing nested fixed effects
  • From: "Lim, Raymond" <[email protected]>
• Re: st: Numbers with decimals and -float- command
  • From: Joseph Monte <[email protected]>
• RE: st: spmat error in stata
  • From: Nick Cox <[email protected]>
• RE: st: spmat error in stata
  • From: Ajita Atreya <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Nick Cox <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Lars Folkestad <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Nick Cox <[email protected]>
• Re: st: spmat error in stata
  • From: Nick Cox <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Lars Folkestad <[email protected]>
• Re: st: Numbers with decimals and -float- command
  • From: Nick Cox <[email protected]>
• Re: st: how to cite Stata helpfile
  • From: Jet <[email protected]>
• st: MLE Estimation of Poisson process
  • From: Sarit Weisburd <[email protected]>
• st: spmat error in stata
  • From: Ajita Atreya <[email protected]>
• RE: st: how to cite Stata helpfile
  • From: Nick Cox <[email protected]>
• RE: st: Why do -intreg- and -truncreg- not give me the same SD as -summarize- ?
  • From: Nick Cox <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Nick Cox <[email protected]>
• RE: st: Unbalanced to Balanced panel
  • From: Nick Cox <[email protected]>
• Re: st: Why do -intreg- and -truncreg- not give me the same SD as -summarize- ?
  • From: Antoine Terracol <[email protected]>
• RE: st: how to cite Stata helpfile
  • From: Richard Williams <[email protected]>
• RE: st: how to cite Stata helpfile
  • From: Nick Cox <[email protected]>
• st: Matching Transaction Types in Stata
  • From: Aleksandar Zaklan <[email protected]>
• Re: st: Why do -intreg- and -truncreg- not give me the same SD as -summarize- ?
  • From: Richard Williams <[email protected]>
• st: how to model the size/shape of an area
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: khb on SSC and SJ
  • From: Ulrich Kohler <[email protected]>
• st: Why do -intreg- and -truncreg- not give me the same SD as -summarize- ?
  • From: "Seed, Paul" <[email protected]>
• Re: st: How to use -suest- with -xtfmb- (test Fama-MacBeth regression coefficients)
  • From: Richard Herron <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Dawood Ashraf <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Dawood Ashraf <[email protected]>
• re:st: Generating Identifier based on string variable
  • From: Christopher Baum <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Dawood Ashraf <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Muhammad Anees <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Muhammad Anees <[email protected]>
• st: Generating Identifier based on string variable
  • From: Dawood Ashraf <[email protected]>
• Re: st: Generating Identifier based on string variable
  • From: Muhammad Anees <[email protected]>
• st: Re: rank-ordered probit in -cmp-
  • From: "David Roodman ([email protected])" <[email protected]>
• RE: st: age: factor variables may not contain noninteger values
  • From: "Jesper Lindhardsen" <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Lars Folkestad <[email protected]>
• Re: st: age: factor variables may not contain noninteger values
  • From: Maarten Buis <[email protected]>
• st: age: factor variables may not contain noninteger values
  • From: Lars Folkestad <[email protected]>
• Re: st: white cross-section standard errors
  • From: Mohammad Reza Farzanegan <[email protected]>
• Re: st: how to cite Stata helpfile
  • From: Maarten Buis <[email protected]>
• Re: st: Unbalanced to Balanced panel
  • From: Muhammad Anees <[email protected]>
• st: Unbalanced to Balanced panel
  • From: Vinod Mishra <[email protected]>
• Re: st: problems with nlsur aids
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: strong instruments
  • From: Cameron McIntosh <[email protected]>
• st: strong instruments
  • From: "donsaane" <[email protected]>
• Re: Re: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Natasha Xingyuan Che <[email protected]>
• Re: st: how to cite Stata helpfile
  • From: Richard Williams <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Richard Williams <[email protected]>
• re: Re: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Christopher Baum <[email protected]>
• re: Re : st: RE: relevance of the instruments
  • From: Christopher Baum <[email protected]>
• Re : st: RE: relevance of the instruments
  • From: donsaane dontsi <[email protected]>
• Re: st: Bug in odbc - allstring?
  • From: [email protected] (Kevin Crow, StataCorp LP)
• st: how to cite Stata helpfile
  • From: Jet <[email protected]>
• st: Numbers with decimals and -float- command
  • From: Joseph Monte <[email protected]>
• Re: st: RE: How to identify patterns of cyclicality using STATA?
  • From: Natasha Xingyuan Che <[email protected]>
• st: RE: relevance of the instruments
  • From: "Millimet, Daniel" <[email protected]>
• st: spell to person/month
  • From: Doerthe Gatermann <[email protected]>
• st: Bug in odbc - allstring?
  • From: Richard Palmer-Jones <[email protected]>
• st: relevance of the instruments
  • From: donsaane dontsi <[email protected]>
• st: method to automate saving row-level estimates after estimation in panel data
  • From: "Hoffman, George" <[email protected]>
• Re: st: Bias corrected p-values after bootstrap
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: macro of macros?
  • From: Billy Schwartz <[email protected]>
• RE: st: Multiple Imputation
  • From: John Ebireri <[email protected]>
• st: RE: RE: Multiple Imputation
  • From: John Ebireri <[email protected]>
• Re: st: macro of macros?
  • From: Lee Panas <[email protected]>
• Re: st: macro of macros?
  • From: Matthew White <[email protected]>
• Re: st: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: macro of macros?
  • From: Billy Schwartz <[email protected]>
• Re: st: Multiple Imputation
  • From: daniel klein <[email protected]>
• st: Bias corrected p-values after bootstrap
  • From: Sunday Clark <[email protected]>
• st: RE: Multiple Imputation
  • From: Nick Cox <[email protected]>
• st: system with endogenous censored and probit regressors
  • From: "Berg, Marrit van den" <[email protected]>
• st: Multiple Imputation
  • From: John Ebireri <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Nick Cox <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• st: RE: How to identify patterns of cyclicality using STATA?
  • From: Nick Cox <[email protected]>
• Re: st: basic question on nl
  • From: Muhammad Anees <[email protected]>
• RE: st: white cross-section standard errors
  • From: Nick Cox <[email protected]>
• RE: st: basic question on nl
  • From: Nick Cox <[email protected]>
• Re: st: white cross-section standard errors
  • From: Scott Merryman <[email protected]>
• Re: st: Computation across observations
  • From: Maarten Buis <[email protected]>
• RE: st: basic question on nl
  • From: "Sarah Kristina Reuter" <[email protected]>
• Re: st: white cross-section standard errors
  • From: Mohammad Reza Farzanegan <[email protected]>
• st: Computation across observations
  • From: "Dudekula, Anwar" <[email protected]>
• st: How to use -suest- with -xtfmb- (test Fama-MacBeth regression coefficients)
  • From: Richard Herron <[email protected]>
• RE: st: Standardized coefficients using nestreg: svy
  • From: Cameron McIntosh <[email protected]>
• st: Implementing Manski bounds for monotone treatment selection
  • From: Bilal Siddiqi <[email protected]>
• Re: st: Standardized coefficients using nestreg: svy
  • From: Richard Williams <[email protected]>
• st: Standardized coefficients using nestreg: svy
  • From: Patricia Logan-Greene <[email protected]>
• Re: st: tsmap error
  • From: Jennifer Owens <[email protected]>
• st: How to identify patterns of cyclicality using STATA?
  • From: Natasha Xingyuan Che <[email protected]>
• Re: st: tsmap error
  • From: Maurizio Pisati <[email protected]>
• st: tsmap error
  • From: Jennifer Owens <[email protected]>
• RE: st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• st: svy with xtlogit/xtreg alternatives
  • From: Ladislav Kozak <[email protected]>
• Re: st: RE: macro of macros?
  • From: Austin Nichols <[email protected]>
• Re: st: Why do I get two different results from the same specification and the same dataset?
  • From: Yuval Arbel <[email protected]>
• Re: st: Why do I get two different results from the same specification and the same dataset?
  • From: Richard Williams <[email protected]>
• Re: st: RE: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: RE: macro of macros?
  • From: Austin Nichols <[email protected]>
• RE: st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: spatial weight matrix in stata
  • From: Austin Nichols <[email protected]>
• Re: st: RE: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: spatial weight matrix in stata
  • From: Ajita Atreya <[email protected]>
• Re: st: spatial weight matrix in stata
  • From: Austin Nichols <[email protected]>
• Re: st: white cross-section standard errors
  • From: Austin Nichols <[email protected]>
• RE: st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: RE: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: spatial weight matrix in stata
  • From: Ajita Atreya <[email protected]>
• RE: st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• Re: st: RE: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: basic question on nl
  • From: Nick Cox <[email protected]>
• st: RE: macro of macros?
  • From: Nick Cox <[email protected]>
• st: macro of macros?
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: Why do I get two different results from the same specification and the same dataset?
  • From: Nick Cox <[email protected]>
• Re: st: Why do I get two different results from the same specification and the same dataset?
  • From: Joerg Luedicke <[email protected]>
• st: white cross-section standard errors
  • From: Mohammad Reza Farzanegan <[email protected]>
• st: Why do I get two different results from the same specification and the same dataset?
  • From: Yuval Arbel <[email protected]>
• Re: st: spatial weight matrix in stata
  • From: Yuval Arbel <[email protected]>
• st: SSC Archive updates
  • From: Christopher Baum <[email protected]>
• SV: st: problems with nlsur aids
  • From: Mintewab Bezabih <[email protected]>
• Re: st: using a loop to run multiple regression models
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: using a loop to run multiple regression models
  • From: Tirthankar Chakravarty <[email protected]>
• re:st: How do I generate dummy variable for a nuclear family?
  • From: Christopher Baum <[email protected]>
• st: How do I generate dummy variable for a nuclear family?
  • From: AP S <[email protected]>
• Re: st: collecting interaction terms after estimation
  • From: Richard Williams <[email protected]>
• st: spatial weight matrix in stata
  • From: Ajita Atreya <[email protected]>
• Re: st: basic question on nl
  • From: Muhammad Anees <[email protected]>
• st: using a loop to run multiple regression models
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: collecting interaction terms after estimation
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: collecting interaction terms after estimation
  • From: Richard Williams <[email protected]>
• st: basic question on nl
  • From: "Sarah Kristina Reuter" <[email protected]>
• Re: st: possible bug in merge, keepusing
  • From: Nick Cox <[email protected]>
• st: collecting interaction terms after estimation
  • From: Maria Ana Vitorino <[email protected]>
• st: collecting interaction terms after estimation
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: merge cross-section with time series data
  • From: Nick Cox <[email protected]>
• st: merge cross-section with time series data
  • From: "Philip Hantschk" <[email protected]>
• Re: st: Forest plot with p from overall z test
  • From: Antonio silva <[email protected]>
• st: possible bug in merge, keepusing
  • From: Robert Duval <[email protected]>
• Re: st: import excel - requiring restart occasionally
  • From: Gabi Huiber <[email protected]>
• Re: st: excel import issue
  • From: Gabi Huiber <[email protected]>
• Re: st: re-using estimates from previously estimated models and related issues
  • From: Cameron McIntosh <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Richard Williams <[email protected]>
• st: New version of -regaxis- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: Date: Fri, 4 Nov 2011 16:00:13 +0000
  • From: Ajita Atreya <[email protected]>
• RE: st: how to show date on a graph title by citing the date local
  • From: Guang Dai <[email protected]>
• Re: st: how to show date on a graph title by citing the date local
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: re-using estimates from previously estimated models and related issues
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: how to show date on a graph title by citing the date local
  • From: James Sams <[email protected]>
• st: how to show date on a graph title by citing the date local
  • From: "G. Dai" <[email protected]>
• Re: st: import excel - requiring restart occasionally
  • From: Billy Schwartz <[email protected]>
• Re: st: problems with substitutable expression program for nonlinear regression
  • From: "Brian P. Poi" <[email protected]>
• RE: st: Confidence intervals: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• st: RE: RE: AR2 test for autocorrelation
  • From: John Ebireri <[email protected]>
• Re: st: Sjlatex and MikTex
  • From: Alberto R Osella <[email protected]>
• st: RE: AR2 test for autocorrelation
  • From: Nick Cox <[email protected]>
• st: AR2 test for autocorrelation
  • From: John Ebireri <[email protected]>
• st: problems with substitutable expression program for nonlinear regression
  • From: "Sarah Kristina Reuter" <[email protected]>
• Re: st: Sjlatex and MikTex
  • From: "Roger B. Newson" <[email protected]>
• RE: st: SOLVED! saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• RE: st: saving -proportion- estimates to a .dta or .csv file last estimates not found
  • From: Tim Evans <[email protected]>
• Re: st: joint estimation of two equations using GLM
  • From: Shehzad Ali <[email protected]>
• RE: st: saving -proportion- estimates to a .dta or .csv file
  • From: Tim Evans <[email protected]>
• Re: st: Sjlatex and MikTex
  • From: Alberto R Osella <[email protected]>
• Re: st: joint estimation of two equations using GLM
  • From: Nick Cox <[email protected]>
• Re: st: Sjlatex and MikTex
  • From: Nick Cox <[email protected]>
• : Re: st: weights for a longitudinal set
  • From: <[email protected]>
• st: nonstationarity in dynamic panels
  • From: Svenja Gärtner <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: <[email protected]>
• st: joint estimation of two equations using GLM
  • From: Shehzad Ali <[email protected]>
• st: Sjlatex and MikTex
  • From: Alberto R Osella <[email protected]>
• Re: st: Exclusion restriction with mprobit
  • From: saqlain raza <[email protected]>
• Re: st: How to convert number format
  • From: Nick Cox <[email protected]>
• Re: st: How to convert number format
  • From: "Richard J. Stoll" <[email protected]>
• Re: st: problems with nlsur aids
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: How to convert number format
  • From: James Sams <[email protected]>
• st: How to convert number format
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: Exclusion restriction with mprobit
  • From: Austin Nichols <[email protected]>
• Re: st: import excel - requiring restart occasionally
  • From: [email protected] (Kevin Crow, StataCorp LP)
• Re: st: marginsplot ignores label() sub-option in legend
  • From: David Muller <[email protected]>
• Re: st: Forest plot with p from overall z test
  • From: "Roger B. Newson" <[email protected]>
• Re: st: Exclusion restriction with mprobit
  • From: saqlain raza <[email protected]>
• Re: st: Increase observations by group and then calculate percentages
  • From: Catherine Tisch <[email protected]>
• st: Shared Frailty including Level 2 variables
  • From: Lee Panas <[email protected]>
• Re: st: Confidence interval in natural units after GLM with log link
  • From: Maarten Buis <[email protected]>
• Re: st: import excel - requiring restart occasionally
  • From: Billy Schwartz <[email protected]>
• Re: st: import excel - requiring restart occasionally
  • From: [email protected] (Kevin Crow, StataCorp LP)
• Re: st: RE: RE: sampsize formula
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: sampsize formula
  • From: William Buchanan <[email protected]>
• Re: st: sampsize formula
  • From: Richard Goldstein <[email protected]>
• st: RE: RE: sampsize formula
  • From: Sara Borelli <[email protected]>
• RE: st: sampsize formula
  • From: Sara Borelli <[email protected]>
• st: RE: sampsize formula
  • From: "Sarah Edgington" <[email protected]>
• Re: st: command "merge" can't be used in some Stata version, why?
  • From: Nick Cox <[email protected]>
• Re: st: sampsize formula
  • From: Richard Goldstein <[email protected]>
• Re: Re: st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Pedro Nakashima <[email protected]>
• st: sampsize formula
  • From: Sara Borelli <[email protected]>
• re: Re: st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Christopher Baum <[email protected]>
• Re: st: command "merge" can't be used in some Stata version, why?
  • From: David Kantor <[email protected]>
• Re: st: Confidence interval in natural units after GLM with log link
  • From: Shehzad Ali <[email protected]>
• Re: st: saving -proportion- estimates to a .dta or .csv file
  • From: Richard Williams <[email protected]>
• Re: st: saving -proportion- estimates to a .dta or .csv file
  • From: Maarten Buis <[email protected]>
• st: saving -proportion- estimates to a .dta or .csv file
  • From: Tim Evans <[email protected]>
• Re: st: weights for a longitudinal set (Was: probable error, "weights invalid" using stset]
  • From: Austin Nichols <[email protected]>
• Re: st: RE: Re: my probit does not converge in Stata 11
  • From: Richard Williams <[email protected]>
• st: RE: Re: my probit does not converge in Stata 11
  • From: mlodefalk <[email protected]>
• Re: RE: st: moderated mediation logistic outcome
  • From: Philip Ender <[email protected]>
• Re: st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Pedro Nakashima <[email protected]>
• st: unbalanced by design
  • From: Clinton Thompson <[email protected]>
• st:Forest plot with p from overall z test
  • From: Frederico Moreira <[email protected]>
• Re: st: RE: RE: generate graph (try 2)
  • From: Nikolaos Pandis <[email protected]>
• Re: st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Phil Schumm <[email protected]>
• Re: st: marginsplot ignores label() sub-option in legend
  • From: Nick Winter <[email protected]>
• Re: st: prvalue and loop rest(grmean)
  • From: Richard Williams <[email protected]>
• Re: st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Phil Schumm <[email protected]>
• st: RE: Reshape problem
  • From: Johan Hellström <[email protected]>
• st: Looking for simple examples, with data, regarding STRUCTS in Mata
  • From: Pedro Nakashima <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: Cameron McIntosh <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: Cameron McIntosh <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: Nick Cox <[email protected]>
• Re: st: confidence intervals for predicted probabilities for different x values after probit
  • From: Maarten Buis <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: Cameron McIntosh <[email protected]>
• st: RE: Reshape problem
  • From: Nick Cox <[email protected]>
• RE: st: Calculation of covariance matrix for unbalanced sample?
  • From: Nick Cox <[email protected]>
• RE: st: xthtaylor by hand or using xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: RE: RE: generate graph (try 2)
  • From: "Philip Ryan" <[email protected]>
• Re: st: Calculation of covariance matrix for unbalanced sample?
  • From: Stas Kolenikov <[email protected]>
• st: confidence intervals for predicted probabilities for different x values after probit
  • From: Vincenzo Carrieri <[email protected]>
• st: Reshape problem
  • From: Johan Hellström <[email protected]>
• Re: st: RE: RE: generate graph (try 2)
  • From: Nikolaos Pandis <[email protected]>
• st: New version of -punafcc- for SSC
  • From: "Roger B. Newson" <[email protected]>
• st: Corelation matrices
  • From: Ozgur Ozdemir <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: "M.M. Kramer" <[email protected]>
• st: Calculation of covariance matrix for unbalanced sample?
  • From: <[email protected]>
• st: weights for a longitudinal set (Was: probable error, "weights invalid" using stset]
  • From: <[email protected]>
• Re: st: marginsplot ignores label() sub-option in legend
  • From: Scott Merryman <[email protected]>
• Re: st: prvalue and loop rest(grmean)
  • From: Tobias Schlager <[email protected]>
• Re: st: Increase observations by group and then calculate percentages
  • From: Nick Cox <[email protected]>
• Re: st: Insert new observation by group
  • From: Nick Cox <[email protected]>
• RE: st: moderated mediation logistic outcome
  • From: Tobias Schlager <[email protected]>
• Re: st: RE: generate graph
  • From: Nikolaos Pandis <[email protected]>
• st: RE: RE: generate graph (try 2)
  • From: "Philip Ryan" <[email protected]>
• st: RE: generate graph
  • From: "Philip Ryan" <[email protected]>
• st: generate graph
  • From: Nikolaos Pandis <[email protected]>
• Re: st: spmap and arrows
  • From: Maurizio Pisati <[email protected]>
• Re: st: zoib
  • From: Jet <[email protected]>
• st: marginsplot ignores label() sub-option in legend
  • From: David Muller <[email protected]>
• st: Increase observations by group and then calculate percentages
  • From: Catherine Tisch <[email protected]>
• Re: st: log files
  • From: Maria Ana Vitorino <[email protected]>
• Re: st: log files
  • From: Phil Clayton <[email protected]>
• st: log files
  • From: Maria Ana Vitorino <[email protected]>
• st: import excel - requiring restart occasionally
  • From: Billy Schwartz <[email protected]>
• Re: st: How to use tobit where the low bounds are not fixed for each observation?
  • From: Yuval Arbel <[email protected]>
• Re: st: RE: Insert new observation by group
  • From: Fernando Luco <[email protected]>
• Re: st: Insert new observation by group
  • From: Fernando Luco <[email protected]>
• RE: st: Draw an offer curve (supply curve)?
  • From: Guang Dai <[email protected]>
• Re: st: How to use tobit where the low bounds are not fixed for each observation?
  • From: Austin Nichols <[email protected]>
• Re: st: Draw an offer curve (supply curve)?
  • From: "Brian P. Poi" <[email protected]>
• Re: st: RE: spineplot and survey weights
  • From: Austin Nichols <[email protected]>
• Re: st: RE: spineplot and survey weights
  • From: Steven Samuels <[email protected]>
• Re: st: Insert new observation by group
  • From: Austin Nichols <[email protected]>
• st: RE: Insert new observation by group
  • From: Nick Cox <[email protected]>
• st: Insert new observation by group
  • From: Fernando Luco <[email protected]>
• st: spmap and arrows
  • From: Maria Ana Vitorino <[email protected]>
• st: RE: RE: RE: How to label days of week and hours of day on x axis
  • From: Nick Cox <[email protected]>
• RE: st: Draw an offer curve (supply curve)?
  • From: Nick Cox <[email protected]>
• RE: st: xthtaylor by hand or using xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• st: RE: RE: How to label days of week and hours of day on x axis
  • From: Guang Dai <[email protected]>
• RE: st: Draw an offer curve (supply curve)?
  • From: Guang Dai <[email protected]>
• st: RE: How to label days of week and hours of day on x axis
  • From: Nick Cox <[email protected]>
• RE: st: Draw an offer curve (supply curve)?
  • From: Nick Cox <[email protected]>
• Re: st: Exclusion restriction with mprobit
  • From: Maarten Buis <[email protected]>
• Re: st: RE: Dropping Duplicates that Aren't Exactly Duplicates
  • From: Lisa Chavez <[email protected]>
• Re: st: Draw an offer curve (supply curve)?
  • From: "G. Dai" <[email protected]>
• Re: st: Draw an offer curve (supply curve)?
  • From: "G. Dai" <[email protected]>
• st: Exclusion restriction with mprobit
  • From: saqlain raza <[email protected]>
• st: How to use tobit where the low bounds are not fixed for each observation?
  • From: Yuval Arbel <[email protected]>
• st: How to label days of week and hours of day on x axis
  • From: "G. Dai" <[email protected]>
• Re: st: RE: Dropping Duplicates that Aren't Exactly Duplicates
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: negative binomial model in stata
  • From: Joerg Luedicke <[email protected]>
• RE: st: New package -use10save9- available on SSC
  • From: Nick Cox <[email protected]>
• RE: st: RE: Dropping Duplicates that Aren't Exactly Duplicates
  • From: Nick Cox <[email protected]>
• Re: st: RE: Dropping Duplicates that Aren't Exactly Duplicates
  • From: Lisa Chavez <[email protected]>
• Re: st: Confidence interval in natural units after GLM with log link
  • From: Maarten Buis <[email protected]>
• Re: st: New package -use10save9- available on SSC
  • From: Lars Ängquist <[email protected]>
• st: RE: Dropping Duplicates that Aren't Exactly Duplicates
  • From: Nick Cox <[email protected]>
• Re: st: negative binomial model in stata
  • From: Jianhong Chen <[email protected]>
• st: re: Kolenikov polychoric
  • From: Christopher Baum <[email protected]>
• Re: st: Nested Logit Model
  • From: "Alvarez,Sergio" <[email protected]>
• st: RE: SSC Archive activity, October 2011
  • From: Mohan Kumar <[email protected]>
• st: SSC Archive activity, October 2011
  • From: Christopher Baum <[email protected]>
• Re: st: negative binomial model in stata
  • From: Joerg Luedicke <[email protected]>
• st: Dropping Duplicates that Aren't Exactly Duplicates
  • From: Lisa Chavez <[email protected]>
• Re: st: identification through heteroskedasticity
  • From: Austin Nichols <[email protected]>
• RE: st: Confidence interval in natural units after GLM with log link
  • From: Cameron McIntosh <[email protected]>
• st: Confidence interval in natural units after GLM with log link
  • From: Shehzad Ali <[email protected]>
• st: Robust Hausman test
  • From: Veronica Veleanu <[email protected]>
• st: RE: spineplot and survey weights
  • From: Nick Cox <[email protected]>
• st: negative binomial model in stata
  • From: Jianhong Chen <[email protected]>
• Re: st: Ranking observations of a variable across a set of variables
  • From: "Jennifer L. Milosch" <[email protected]>
• st: Nested Logit Model
  • From: Luis Felipe Correa Smits <[email protected]>
• RE: st: probable error, "weights invalid" using stset
  • From: "Brown, Elizabeth" <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: "M.M. Kramer" <[email protected]>
• st: RE: RE: Multinomial logit with a nonlinear combination utility equation
  • From: "Simons, Chris N" <[email protected]>
• RE: st: xthtaylor by hand or using xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: binormal approximation
  • From: Matthew Baker <[email protected]>
• st: RE: RE: RE: generate rolling proportions with foreach using an MI dataset
  • From: Tim Evans <[email protected]>
• st: Mean within- and between-cluster distances after sqom and sqclusterdat
  • From: Jacob Day <[email protected]>
• st:Forest plot with p from overall z test
  • From: Antonio silva <[email protected]>
• st: RE: RE: generate rolling proportions with foreach using an MI dataset
  • From: Tim Evans <[email protected]>
• Re: st: how to indicate pseudo R-squared in esttab
  • From: Richard Williams <[email protected]>
• st: spineplot and survey weights
  • From: ann montgomery <[email protected]>
• st: RE: generate rolling proportions with foreach using an MI dataset
  • From: Nick Cox <[email protected]>
• Re: st: RE: Foreach loop for subsequent variables
  • From: Dmitriy Glumov <[email protected]>
• Re: st: generate rolling proportions with foreach using an MI dataset
  • From: Maarten Buis <[email protected]>
• st: generate rolling proportions with foreach using an MI dataset
  • From: Tim Evans <[email protected]>
• RE: st: arega and post regression tests
  • From: Nick Cox <[email protected]>
• Re: st: arega and post regression tests
  • From: Maarten Buis <[email protected]>
• re: RE: st: arega and post regression tests
  • From: Christopher Baum <[email protected]>
• RE: st: arega and post regression tests
  • From: Nick Cox <[email protected]>
• RE: st: arega and post regression tests
  • From: Ozgur Ozdemir <[email protected]>
• RE: st: arega and post regression tests
  • From: Ozgur Ozdemir <[email protected]>
• RE: st: arega and post regression tests
  • From: Nick Cox <[email protected]>
• st: insufficient observations panel data
  • From: "donsaane" <[email protected]>
• st: Degrees of Freedom, F-test and Multiple Imputation
  • From: Andrea Bennett <[email protected]>
• re: st: arega and post regression tests
  • From: Christopher Baum <[email protected]>
• re: st: how to indicate pseudo R-squared in esttab
  • From: Christopher Baum <[email protected]>
• st: how to indicate pseudo R-squared in esttab
  • From: fukugawa_nobuya <[email protected]>
• st: RE: arega and post regression tests
  • From: Nick Cox <[email protected]>
• st: binormal approximation
  • From: Valerie Orozco <[email protected]>
• st: New package -ipfweight- on SSC
  • From: Michael Bergmann <[email protected]>
• st: arega and post regression tests
  • From: Ozgur Ozdemir <[email protected]>
• Re: st: Propensity Score Matching - Show matches
  • From: daniel klein <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: Nick Cox <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: "M.M. Kramer" <[email protected]>
• Re: st: Ranking observations of a variable across a set of variables
  • From: Nick Cox <[email protected]>
• st: Propensity Score Matching - Show matches
  • From: "Maximilian Sarry" <[email protected]>
• Re: st: xthtaylor by hand or using xtivreg2
  • From: Nick Cox <[email protected]>
• Re: st: command "merge" can't be used in some Stata version, why?
  • From: Nick Cox <[email protected]>
• Re: st: RE: Difference Model
  • From: Vikram Finavker <[email protected]>
• st: xthtaylor by hand or using xtivreg2
  • From: "M.M. Kramer" <[email protected]>
• st: command "merge" can't be used in some Stata version, why?
  • From: econqian <[email protected]>
• Re: st: RE: Difference Model
  • From: Nick Cox <[email protected]>
• Re: st: how to aggregate data
  • From: Nick Cox <[email protected]>
• st: how to aggregate data
  • From: fukugawa_nobuya <[email protected]>
• Re: st: RE: Difference Model
  • From: Vikram Finavker <[email protected]>
• Re: st: Ranking observations of a variable across a set of variables
  • From: Nick Cox <[email protected]>
• Re: st: RE: query on testing uniform distributions
  • From: Maarten Buis <[email protected]>
• st: Forest plot with p from overall z test
  • From: Antonio silva <[email protected]>
• Re: st: Ranking observations of a variable across a set of variables
  • From: Tirthankar Chakravarty <[email protected]>
• Re: st: testing nested logistic model using mi estimate: prefix command
  • From: Richard Williams <[email protected]>
• st: testing nested logistic model using mi estimate: prefix command
  • From: Alan Acock <[email protected]>
• st: Ranking observations of a variable across a set of variables
  • From: "Jennifer L. Milosch" <[email protected]>
• st: RE: RE: Difference Model
  • From: Nick Cox <[email protected]>
• st: RE: Multinomial logit with a nonlinear combination utility equation
  • From: "CJ Lan" <[email protected]>
• st: RE: Difference Model
  • From: Nick Cox <[email protected]>
• st: A Problem about Random Effects Negative Binomial Model (xtnbreg)
  • From: Kun-Feng Wu <[email protected]>
• st: Difference Model
  • From: vikramfinavker <[email protected]>
• Re: st: Counting Number of Program Days [was: RE: RE: statalist-digest V4 #4323]
  • From: Nick Cox <[email protected]>
• st: RE: statalist-digest V4 #4323
  • From: Nicole Johnson <[email protected]>
• RE: st: Time Series Poisson
  • From: "Jacobs, David" <[email protected]>
• Re: st: Time Series Poisson
  • From: Nick Cox <[email protected]>
• RE: st: Time Series Poisson
  • From: "Jacobs, David" <[email protected]>
• Re: st: find the common observations of several variables
  • From: Nick Cox <[email protected]>
• st: find the common observations of several variables
  • From: econqian <[email protected]>
• Re: st: RE: RE: bootstrap reject()
  • From: Shehzad Ali <[email protected]>
• st: excel import issue
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: RE: RE: query on testing uniform distributions
  • From: Nick Cox <[email protected]>
• Re: st: RE: Foreach loop for subsequent variables
  • From: daniel klein <[email protected]>
• st: Multinomial logit with a nonlinear combination utility equation
  • From: "Simons, Chris N" <[email protected]>
• st: RE: -xi- in versions 11, 12
  • From: Nick Cox <[email protected]>
• st: RE: query on testing uniform distributions
  • From: Sergio Salis <[email protected]>
• RE: st: RE: Foreach loop for subsequent variables
  • From: Nick Cox <[email protected]>
• Re: st: RE: Foreach loop for subsequent variables
  • From: Matthew White <[email protected]>
• Re: st: probable error, "weights invalid" using stset
  • From: Austin Nichols <[email protected]>
• Re: st: RE: Foreach loop for subsequent variables
  • From: Dmitriy Glumov <[email protected]>
• Re: st: -xi- in versions 11, 12
  • From: Richard Williams <[email protected]>
• st: -xi- in versions 11, 12
  • From: Clyde B Schechter <[email protected]>
• Re: st: QUAIDS question
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: RE: Foreach loop for subsequent variables
  • From: Nick Cox <[email protected]>
• st: RE: Foreach loop for subsequent variables
  • From: daniel klein <[email protected]>
• Re: st: RE: Foreach loop for subsequent variables
  • From: Dmitriy Glumov <[email protected]>
• Re: st: stratified Cox proportional hazards model and AIC
  • From: Brigham Whitman <[email protected]>
• st: get a map of a specific area using spmap
  • From: Alejandra González <[email protected]>
• st: New versions of -punaf- and -punafcc- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: Minimum Reservation Prices in Land Auctions
  • From: Yuval Arbel <[email protected]>
• st: QUAIDS question
  • From: Derya Karaci <[email protected]>
• st: New package -regpar- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: identification through heteroskedasticity
  • From: Joaquin Canessa <[email protected]>
• st: RE: Foreach loop for subsequent variables
  • From: Nick Cox <[email protected]>
• st: Foreach loop for subsequent variables
  • From: Dmitriy Glumov <[email protected]>
• RE: st: RE: RE: bootstrap reject()
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: bootstrap reject()
  • From: Nick Cox <[email protected]>
• RE: st: probable error, "weights invalid" using stset
  • From: "Brown, Elizabeth" <[email protected]>
• Re: st: RE: RE: bootstrap reject()
  • From: Maarten Buis <[email protected]>
• Re: st: RE: RE: bootstrap reject()
  • From: Shehzad Ali <[email protected]>
• RE: st: query on testing uniform distributions
  • From: Nick Cox <[email protected]>
• st: RE: RE: bootstrap reject()
  • From: Nick Cox <[email protected]>
• st: Re: xtmod, lag/lead variables
  • From: Christopher Baum <[email protected]>
• st: RE: bootstrap reject()
  • From: Nick Cox <[email protected]>
• RE: st: RE: assigning same number to slightly different string var.
  • From: Nick Cox <[email protected]>
• st: bootstrap reject()
  • From: Shehzad Ali <[email protected]>
• Re: st: RE: assigning same number to slightly different string var.
  • From: "Philip Hantschk" <[email protected]>
• st: RE: assigning same number to slightly different string var.
  • From: Nick Cox <[email protected]>
• st: assigning same number to slightly different string var.
  • From: "Philip Hantschk" <[email protected]>
• Re: st: robustness check
  • From: Maarten Buis <[email protected]>
• st: robustness check
  • From: "S.H. Former" <[email protected]>
• Re: st: query on testing uniform distributions
  • From: Maarten Buis <[email protected]>
• Re: st: query on testing uniform distributions
  • From: Nick Cox <[email protected]>
• Re: st: 3sls-fe regression for panel data
  • From: John Antonakis <[email protected]>
• Re: st: 3sls-fe regression for panel data
  • From: Daniela A <[email protected]>
• st: query on testing uniform distributions
  • From: Maarten Buis <[email protected]>
• Re: st: RE: r(1000) error when running xi
  • From: A Loumiotis <[email protected]>
• Re: st: RE: r(1000) error when running xi
  • From: Nick Cox <[email protected]>
• Re: st: stratified Cox proportional hazards model and AIC
  • From: Maarten Buis <[email protected]>
• Re: st: zoib
  • From: Maarten Buis <[email protected]>
• st: Spline implementing generalized cross-validation
  • From: Garry Anderson <[email protected]>
• Re: st: RE: r(1000) error when running xi
  • From: A Loumiotis <[email protected]>