Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• RE: st: Access scheme colors in program
  • From: Timothy Mak <[email protected]>
• RE: st: Transform table to graph
  • From: Kun A Susiloretni <[email protected]>
• RE: st: Transform table to graph
  • From: Kun A Susiloretni <[email protected]>
• Re: st: Transform table to graph
  • From: "P.Praeg" <[email protected]>
• Re: st: How to graph several mean trajectories and combine them in a single graph
  • From: Alan Acock <[email protected]>
• Re: st: RE: Au revoir Statalist. Hello Statalist.
  • From: Alfonso Sánchez-Peñalver <[email protected]>
• Re: st: RE: Au revoir Statalist. Hello Statalist.
  • From: Philip Jones <[email protected]>
• Re: st: Au revoir Statalist. Hello Statalist.
  • From: Philip Jones <[email protected]>
• RE: st: RE: eform
  • From: Joe Canner <[email protected]>
• Re: st: RE: Au revoir Statalist. Hello Statalist.
  • From: Phil Schumm <[email protected]>
• Re: st: RE: eform
  • From: Nick Cox <[email protected]>
• st: RE: eform
  • From: Joe Canner <[email protected]>
• Re: st: constraining gamma 0,1 in GMNL command
  • From: "Heidi Pitts" <[email protected]>
• Re: st: RE: Au revoir Statalist. Hello Statalist.
  • From: Alfonso Sánchez-Peñalver <[email protected]>
• RE: st: Mata, receiving conformability error in maximising the logistic log-likelihood function
  • From: Eilya Torshizian <[email protected]>
• st: eform
  • From: Claire Rushton <[email protected]>
• st: RE: Au revoir Statalist. Hello Statalist.
  • From: Joe Canner <[email protected]>
• Re: st: Using version control software with Stata
  • From: Stas Kolenikov <[email protected]>
• Re: st: Access scheme colors in program
  • From: Nick Winter <[email protected]>
• st: confidence intervals for Fine and Gray competing risks cumulative incidence curves
  • From: Geoffrey Fatti <[email protected]>
• Re: st: constraining gamma 0,1 in GMNL command
  • From: Arne Risa Hole <[email protected]>
• Re: st: Imposing Confidence Intervals on LOWESS within a scatter plot.
  • From: Nick Cox <[email protected]>
• st: Access scheme colors in program
  • From: Thomas Grund <[email protected]>
• st: Re: Tabout and append option
  • From: "Dudekula, Anwar" <[email protected]>
• st: RE: RE: Putexcel with survey and tabulate command
  • From: "Dudekula, Anwar" <[email protected]>
• st: Imposing Confidence Intervals on LOWESS within a scatter plot.
  • From: Micky Padway <[email protected]>
• st: Au revoir Statalist. Hello Statalist.
  • From: Marcello Pagano <[email protected]>
• st: Using Aalen's linear hazards model
  • From: Anwar Musah <[email protected]>
• RE: st: Multiple Imputations by Chained Equations
  • From: Cristina Cleghorn <[email protected]>
• Re: st: Specifying Regression model as an equation
  • From: Nick Cox <[email protected]>
• st: Specifying Regression model as an equation
  • From: Rijo John <[email protected]>
• st: Update to -chaid- on SSC
  • From: Joseph Luchman <[email protected]>
• st: RE: Putexcel with survey and tabulate command
  • From: "Cohen, Elan" <[email protected]>
• Re: st: Using version control software with Stata
  • From: Phil Schumm <[email protected]>
• Re: st: decrease ll nested models sem
  • From: Volker Lang <[email protected]>
• Re: st: Multiple Imputations by Chained Equations
  • From: Stas Kolenikov <[email protected]>
• RE: st: Multiple Imputations by Chained Equations
  • From: Cristina Cleghorn <[email protected]>
• Re: st: RE: BHPS
  • From: Brendan Halpin <[email protected]>
• Re: st: Multiple Imputations by Chained Equations
  • From: William Buchanan <[email protected]>
• st: Multiple Imputations by Chained Equations
  • From: Cristina Cleghorn <[email protected]>
• Re: st: Dropping Observations
  • From: Scott Merryman <[email protected]>
• st: Dropping Observations
  • From: ömer limanlı <[email protected]>
• st: RE: BHPS
  • From: Yasir Zuberi <[email protected]>
• Re: st: Mata, receiving conformability error in maximising the logistic log-likelihood function
  • From: Christophe Kolodziejczyk <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: jean-luc morin-chesnel <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: jean-luc morin-chesnel <[email protected]>
• RE: st: Using version control software with Stata
  • From: Timothy Mak <[email protected]>
• st: Updated version of -holsti- on SSC
  • From: Alexander Staudt <[email protected]>
• st: Updated version of -krippalpha- on SSC
  • From: Alexander Staudt <[email protected]>
• st: Mata, receiving conformability error in maximising the logistic log-likelihood function
  • From: Eilya Torshizian <[email protected]>
• Re: st: SSC for Bonferroni correction - multiple testing?
  • From: Gwinyai Masukume <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• Re: st: graphing median values against time
  • From: Donald Spady <[email protected]>
• st: what should be noticed in using the linear interpolation
  • From: "Kay" <[email protected]>
• Re: st: How to use the linear interpolation in Stata
  • From: Stas Kolenikov <[email protected]>
• Re: st: Mime-Version: 1.0
  • From: "Kay" <[email protected]>
• RE: st: graphing median values against time
  • From: Timothy Mak <[email protected]>
• Re: st: Mime-Version: 1.0
  • From: Phil Schumm <[email protected]>
• st: How to use the linear interpolation in Stata
  • From: "Kay" <[email protected]>
• st: Mime-Version: 1.0
  • From: "Kay" <[email protected]>
• Re: st: changing bar width on graph
  • From: Ankit <[email protected]>
• RE: st: Transform table to graph
  • From: Kun A Susiloretni <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: Phil Schumm <[email protected]>
• Re: st: graphing median values against time
  • From: Nick Cox <[email protected]>
• Re: st: graphing median values against time
  • From: Donald Spady <[email protected]>
• Re: st: changing bar width on graph
  • From: Nick Cox <[email protected]>
• st: changing bar width on graph
  • From: Ankit Sakhuja <[email protected]>
• RE: st: BHPS analysts
  • From: Yasir Zuberi <[email protected]>
• Re: st: graphing median values against time
  • From: Nick Cox <[email protected]>
• Re: st: graphing median values against time
  • From: Donald Spady <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: Theophilus Dapel <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: Brendan Halpin <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• st: confidence intervals for Fine and Gray competing risks cumulative incidence curves
  • From: Geoffrey Fatti <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: Theophilus Dapel <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: William Buchanan <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: Stas Kolenikov <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: Theophilus Dapel <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: Theophilus Dapel <[email protected]>
• Re: st: SSC for Bonferroni correction - multiple testing?
  • From: "Roger B. Newson" <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: jean-luc morin-chesnel <[email protected]>
• st: SSC for Bonferroni correction - multiple testing?
  • From: Gwinyai Masukume <[email protected]>
• st: Regress with fixed effects
  • From: Julian Kochan <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: jean-luc morin-chesnel <[email protected]>
• Re: st: Adjacency matrix in Stata
  • From: Stas Kolenikov <[email protected]>
• st: Adjacency matrix in Stata
  • From: jean-luc morin-chesnel <[email protected]>
• RE: st: Transform table to graph
  • From: Kun A Susiloretni <[email protected]>
• Re: st: Transform table to graph
  • From: "Roger B. Newson" <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: John Antonakis <[email protected]>
• Re: st: Estimating SEM with Dummy
  • From: William Buchanan <[email protected]>
• st: Estimating SEM with Dummy
  • From: Theophilus Dapel <[email protected]>
• st: Transform table to graph
  • From: Kun A Susiloretni <[email protected]>
• Re: st: regress with dummys | difference in difference estimator
  • From: Julian Kochan <[email protected]>
• Re: st: Format labels in table command
  • From: Nick Cox <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• st: Re: saving output from zandrews command
  • From: Christopher Baum <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• st: Revision of -itsa- available on SSC
  • From: "Ariel Linden" <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• st: Format labels in table command
  • From: "J. J. W." <[email protected]>
• RE: st: converting table into matrix
  • From: Joe Canner <[email protected]>
• Re: st: ordinal mixed effects model with interaction and quadratic terms
  • From: "Pritsch, Julian" <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• st: gausshermite question
  • From: "David Rivenbark" <[email protected]>
• Re: st: Confidence intervals after -xtmixed-
  • From: Brendan Halpin <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: BHPS analysts
  • From: Brendan Halpin <[email protected]>
• Re: st: ordinal mixed effects model with interaction and quadratic terms
  • From: David Hoaglin <[email protected]>
• Re: st: plotting confidence bands around marginal means from mixed model
  • From: "Roger B. Newson" <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• st: Putexcel with survey and tabulate command
  • From: "Dudekula, Anwar" <[email protected]>
• Re: st: ordinal mixed effects model with interaction and quadratic terms
  • From: Darcy Hannibal <[email protected]>
• st: plotting confidence bands around marginal means from mixed model
  • From: Eric Jacobson <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• Re: st: Re: kdensity of a date
  • From: Austin Nichols <[email protected]>
• Re: st: BHPS analysts
  • From: Brendan Halpin <[email protected]>
• Re: st: RE: merge two datasets-variable str8 str10
  • From: R Zhang <[email protected]>
• Re: st: converting table into matrix
  • From: R Zhang <[email protected]>
• st: Re: kdensity of a date
  • From: Pietro Biroli <[email protected]>
• st: constraining gamma 0,1 in GMNL command
  • From: "Heidi Pitts" <[email protected]>
• RE: st: Format summary table numbers with maximum of one decimal
  • From: Christoph Schnelle <[email protected]>
• st: Area under a PDF or CDF
  • From: Dadhi Ram Adhikari <[email protected]>
• Re: st: Format summary table numbers with maximum of one decimal
  • From: Phil Schumm <[email protected]>
• st: BHPS adf test
  • From: Yasir Zuberi <[email protected]>
• st: Format summary table numbers with maximum of one decimal
  • From: Christoph Schnelle <[email protected]>
• Re: st: regress with dummys | difference in difference estimator
  • From: Fernando Furquim <[email protected]>
• Re: st: Using version control software with Stata
  • From: Jeph Herrin <[email protected]>
• st: ordinal mixed effects model with interaction and quadratic terms
  • From: "Pritsch, Julian" <[email protected]>
• Re: st: converting table into matrix
  • From: Nick Cox <[email protected]>
• st: converting table into matrix
  • From: R Zhang <[email protected]>
• Re: st: Re: kdensity of a date
  • From: Austin Nichols <[email protected]>
• Re: st: Re: kdensity of a date
  • From: Nick Cox <[email protected]>
• st: Re: kdensity of a date
  • From: Pietro Biroli <[email protected]>
• st: regress with dummys | difference in difference estimator
  • From: Julian Kochan <[email protected]>
• st: regress with dummys | Difference in Difference estimator
  • From: Julian Kochan <[email protected]>
• Re: st: Using version control software with Stata
  • From: Phil Schumm <[email protected]>
• st: RE: merge two datasets-variable str8 str10
  • From: Joe Canner <[email protected]>
• st: merge two datasets-variable str8 str10
  • From: R Zhang <[email protected]>
• Re: st: graphing median values against time
  • From: Donald Spady <[email protected]>
• st: GMM (System-GMM)_testing for significant difference between coefficients estimated for two sub-sample groups
  • From: Surender Komera <[email protected]>
• Re: st: Assumptions for continuous predictor in negative binomial regression model
  • From: David Hoaglin <[email protected]>
• Re: st: Using version control software with Stata
  • From: William Buchanan <[email protected]>
• Re: st: Combining catagories of risk
  • From: David Hoaglin <[email protected]>
• Re: st: Using version control software with Stata
  • From: Nick Cox <[email protected]>
• Re: st: Synth - Quarterly Data
  • From: Nick Cox <[email protected]>
• RE: st: Synth - Quarterly Data
  • From: "Fonseca-Ferreira,V (pgt)" <[email protected]>
• Re: st: Synth - Quarterly Data
  • From: Nick Cox <[email protected]>
• RE: st: Synth - Quarterly Data
  • From: "Fonseca-Ferreira,V (pgt)" <[email protected]>
• Re: st: Combining catagories of risk
  • From: Claire Rushton <[email protected]>
• Re: st: Assumptions for continuous predictor in negative binomial regression model
  • From: Nick Cox <[email protected]>
• RE: st: Combining catagories of risk
  • From: "Seed, Paul" <[email protected]>
• Re: st: Using version control software with Stata
  • From: William Buchanan <[email protected]>
• RE: st: Assumptions for continuous predictor in negative binomial regression model
  • From: <[email protected]>
• Re: st: Using version control software with Stata
  • From: Maarten Buis <[email protected]>
• st: testing for significant differences between coefficients estimated using XTABOND2
  • From: Surender Komera <[email protected]>
• Re: st: Assumptions for continuous predictor in negative binomial regression model
  • From: Maarten Buis <[email protected]>
• Re: st: Assumptions for continuous predictor in negative binomial regression model
  • From: Nick Cox <[email protected]>
• st: Assumptions for continuous predictor in negative binomial regression model
  • From: <[email protected]>
• RE: st: graphing median values against time
  • From: Timothy Mak <[email protected]>
• st: RE: Combining catagories of risk
  • From: Timothy Mak <[email protected]>
• st: Using version control software with Stata
  • From: Timothy Mak <[email protected]>
• Re: st: graphing median values against time
  • From: Donald Spady <[email protected]>
• Re: st: graphing median values against time
  • From: Nick Cox <[email protected]>
• st: Margins after xtologit, fe
  • From: kevin snapp <[email protected]>
• st: graphing median values against time
  • From: Donald Spady <[email protected]>
• Re: st: Synth - Quarterly Data
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Synth - Quarterly Data
  • From: "Fonseca-Ferreira,V (pgt)" <[email protected]>
• Re: st: nlcom
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: RE: Sampling problem
  • From: Daniela Albers <[email protected]>
• Re: st: nlcom
  • From: Alfonso Sanchez-Penalver <[email protected]>
• st: pseudo panel
  • From: "Jena, Pradyot (CIMMYT - Nairobi)" <[email protected]>
• st: nlcom
  • From: Nigussie Tefera <[email protected]>
• st: RE: fastsample: Sampling 100x faster than Stata's sample and bsample
  • From: Joe Canner <[email protected]>
• st: RE: RE: Sampling problem
  • From: Joe Canner <[email protected]>
• st: RE: Sampling problem
  • From: Joe Canner <[email protected]>
• st: RE: fastsample: Sampling 100x faster than Stata's sample and bsample
  • From: Joe Canner <[email protected]>
• st: GSEM References
  • From: Robin Jeffries <[email protected]>
• st: fastsample: Sampling 100x faster than Stata's sample and bsample
  • From: Andrew Maurer <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: Nick Winter <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: Maarten Buis <[email protected]>
• Re: st: heckprobit r(3499) error
  • From: Barbro Widerstedt <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: Nick Winter <[email protected]>
• Re: st: heckprobit r(3499) error
  • From: Nick Cox <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: daniel klein <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: Maarten Buis <[email protected]>
• Re: st: syntax and gettoken with parentheses and equal signs
  • From: daniel klein <[email protected]>
• st: heckprobit r(3499) error
  • From: Barbro Widerstedt <[email protected]>
• RE: st: can GLLAMM handle missing data?
  • From: "Pesola, Francesca" <[email protected]>
• st: syntax and gettoken with parentheses and equal signs
  • From: Eric Lewis <[email protected]>
• Re: st: granger causality test
  • From: Prakash Singh <[email protected]>
• Re: st: Evaluate if a dataset is empty
  • From: Nick Cox <[email protected]>
• RE: st: Evaluate if a dataset is empty
  • From: "Seliger Florian" <[email protected]>
• RE: st: Evaluate if a dataset is empty
  • From: "Seliger Florian" <[email protected]>
• Re: st: Evaluate if a dataset is empty
  • From: Nick Cox <[email protected]>
• Re: st: Evaluate if a dataset is empty
  • From: Nick Cox <[email protected]>
• Re: st: Evaluate if a dataset is empty
  • From: Alfonso Sanchez-Penalver <[email protected]>
• Re: st: Evaluate if a dataset is empty
  • From: Maarten Buis <[email protected]>
• st: Evaluate if a dataset is empty
  • From: "Seliger Florian" <[email protected]>
• Re: st: Calculating standard deviations used to approximate beta distributions
  • From: Steve Samuels <[email protected]>
• Re: st: decrease ll nested models sem
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: generate growths variable out of two other variables
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Propensity score matching in Stata
  • From: Margaret MacDougall <[email protected]>
• st: generate growths variable out of two other variables
  • From: Julian Kochan <[email protected]>
• st: Maximum likelihood programming for panel data
  • From: "Zou Lei (AIM)" <[email protected]>
• RE: st: xtivreg2 singleton groups identification or definitions
  • From: "Shao,Diana" <[email protected]>
• Re: st: xtivreg2 singleton groups identification or definitions
  • From: Nick Cox <[email protected]>
• st: xtivreg2 singleton groups identification or definitions
  • From: "Shao,Diana" <[email protected]>
• Re: st: Propensity score matching in Stata
  • From: David Kantor <[email protected]>
• st: RE: Sampling problem
  • From: Joe Canner <[email protected]>
• Re: st: bootstrap means of several variables in one command
  • From: "Mitchell F. Berman" <[email protected]>
• Re: st: bootstrap means of several variables in one command
  • From: Nick Cox <[email protected]>
• Re: st: formatting dates using "todate"
  • From: Nick Cox <[email protected]>
• st: Sampling problem
  • From: Daniela Albers <[email protected]>
• st: bootstrap means of several variables in one command
  • From: "Mitchell F. Berman" <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Roger Cremades Rodeja <[email protected]>
• st: formatting dates using "todate"
  • From: Alexey Lyubimov <[email protected]>
• Re: st: RE: P-values for the difference in sensitivity in metandi
  • From: Ronan Conroy <[email protected]>
• st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Houdou Basse Mama <[email protected]>
• Re: st: BHPS analysts
  • From: Muhammad Anees <[email protected]>
• Re: st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: RE: psmatch2 vs attk
  • From: Rossella Verzulli <[email protected]>
• st: Simulation for cluster with unequal size
  • From: "Raja, Dr. Edwin Amalraj" <[email protected]>
• Re: st: can GLLAMM handle missing data?
  • From: David Hoaglin <[email protected]>
• st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Houdou Basse Mama <[email protected]>
• Re: st: RE: RE: RE: psmatch2 vs attk
  • From: Nick Cox <[email protected]>
• Re: st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: psmatch2 vs attk
  • From: Joe Canner <[email protected]>
• st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Houdou Basse Mama <[email protected]>
• RE: st: RE: Efficient code to generate many date/time variables at once
  • From: Andrew Maurer <[email protected]>
• Re: st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Nick Cox <[email protected]>
• st: Re: Creating a Peer-Variable excluding the focal entity
  • From: Houdou Basse Mama <[email protected]>
• st: RE: RE: psmatch2 vs attk
  • From: Rossella Verzulli <[email protected]>
• st: RE: BHPS analysts
  • From: Joe Canner <[email protected]>
• st: MI with huge repeated cross-sectional survey: split & merge?
  • From: Michelle Carras <[email protected]>
• st: RE: psmatch2 vs attk
  • From: Joe Canner <[email protected]>
• st: psmatch2 vs attk
  • From: Rossella Verzulli <[email protected]>
• Re: st: RE: Combining Harard Ratios using METAN
  • From: Claire Rushton <[email protected]>
• st: Combining catagories of risk
  • From: Claire Rushton <[email protected]>
• st: BHPS analysts
  • From: Yasir Zuberi <[email protected]>
• st: saving output from zandrews command
  • From: "Cleeren K (MW)" <[email protected]>
• st: RE: Combining Harard Ratios using METAN
  • From: Joe Canner <[email protected]>
• st: Panel vector error-correction model
  • From: Alexandra Tsiotras <[email protected]>
• RE: st: can GLLAMM handle missing data?
  • From: "Pesola, Francesca" <[email protected]>
• Re: st: can GLLAMM handle missing data?
  • From: David Hoaglin <[email protected]>
• st: Combining Harard Ratios using METAN
  • From: Claire Rushton <[email protected]>
• Re: st: Propensity score matching in Stata
  • From: natalia malancu <[email protected]>
• st: Propensity score matching in Stata
  • From: Margaret MacDougall <[email protected]>
• st: External variable does not change within a user-defined program
  • From: Yuliya Romanenko <[email protected]>
• RE: st: can GLLAMM handle missing data?
  • From: "Pesola, Francesca" <[email protected]>
• Re: st: can GLLAMM handle missing data?
  • From: Nick Cox <[email protected]>
• Re: st: Maximum Likelihood with mata vs Stata
  • From: "Amparo Nagore Garcia" <[email protected]>
• RE: st: can GLLAMM handle missing data?
  • From: "Pesola, Francesca" <[email protected]>
• Re: st: can GLLAMM handle missing data?
  • From: Nick Cox <[email protected]>
• st: can GLLAMM handle missing data?
  • From: "Pesola, Francesca" <[email protected]>
• Re: st: Maximum Likelihood with mata vs Stata
  • From: Maarten Buis <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Maarten Buis <[email protected]>
• Re: st: RE: Efficient code to generate many date/time variables at once
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: insheetjson: trouble parsing json data
  • From: Lucas Ferreira Mation <[email protected]>
• st: RE: Panel with multiple problems
  • From: "Schaffer, Mark E" <[email protected]>
• st: RE: RE: insheetjson: trouble parsing json data
  • From: Joe Canner <[email protected]>
• st: RE: Efficient code to generate many date/time variables at once
  • From: "Radwin, David" <[email protected]>
• st: RE: insheetjson: trouble parsing json data
  • From: Joe Canner <[email protected]>
• st: Panel with multiple problems
  • From: Philip Bromiley <[email protected]>
• st: Efficient code to generate many date/time variables at once
  • From: Alison El Ayadi <[email protected]>
• st: state space model (Hessian is not negative semidefinite)
  • From: 杂事 <[email protected]>
• Re: st: logit model with endogenous
  • From: John Antonakis <[email protected]>
• RE: st: RE: P-values for the difference in sensitivity in metandi
  • From: Joe Canner <[email protected]>
• st: Maximum Likelihood with mata vs Stata
  • From: "Amparo Nagore Garcia" <[email protected]>
• st: comparing more than 2 negative binomial models using fitstat command
  • From: "Cale, Grace E" <[email protected]>
• st: insheetjson: trouble parsing json data
  • From: Lucas Ferreira Mation <[email protected]>
• Re: st: RE: P-values for the difference in sensitivity in metandi
  • From: Carole Lunny <[email protected]>
• RE: st: RE: P-values for the difference in sensitivity in metandi
  • From: Joe Canner <[email protected]>
• Re: st: Average of last two previous observations conditional on another variable value
  • From: Nick Cox <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: RE: P-values for the difference in sensitivity in metandi
  • From: Carole Lunny <[email protected]>
• st: Average of last two previous observations conditional on another variable value
  • From: Irene Ferrari <[email protected]>
• st: RE: P-values for the difference in sensitivity in metandi
  • From: Joe Canner <[email protected]>
• st: P-values for the difference in sensitivity in metandi
  • From: Carole Lunny <[email protected]>
• Re: st: Creating filename variable
  • From: Nick Cox <[email protected]>
• Re: st: Creating filename variable
  • From: Nick Winter <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Nick Cox <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Roger Cremades Rodeja <[email protected]>
• st: GLLAMM for multinomia logisic
  • From: "Pesola, Francesca" <[email protected]>
• Re: st: Creating filename variable
  • From: Nick Cox <[email protected]>
• st: Creating filename variable
  • From: Anya Burton <[email protected]>
• st: RE: RE: pscore and attnd
  • From: Rossella Verzulli <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Winter <[email protected]>
• השב: Re: st: logit model with endogenous
  • From: Yuval Arbel <[email protected]>
• st: too small clusters: bootstrapping as solution? (3 dimensional panel, ivreg2)
  • From: Christopher Parker <[email protected]>
• Re: st: logit model with endogenous
  • From: Richard Williams <[email protected]>
• Re: st: RE: RE: 'Fuzzy' text match
  • From: Robert Davidson <[email protected]>
• Re: st: removing value lables in catplot
  • From: Nick Cox <[email protected]>
• Re: st: removing value lables in catplot
  • From: simone pedemonte <[email protected]>
• Re: st: removing value lables in catplot
  • From: Nick Cox <[email protected]>
• Re: st: removing value lables in catplot
  • From: Nick Cox <[email protected]>
• Re: [SPAM] Re: Re: [SPAM] Re: st: sum the variable based on other variables
  • From: wanhaiyou <[email protected]>
• Re: st: removing value lables in catplot
  • From: simone pedemonte <[email protected]>
• Re: st: removing value lables in catplot
  • From: Nick Cox <[email protected]>
• Re: Re: [SPAM] Re: st: sum the variable based on other variables
  • From: Nick Cox <[email protected]>
• Re: Re: [SPAM] Re: st: sum the variable based on other variables
  • From: wanhaiyou <[email protected]>
• st: removing value lables in catplot
  • From: simone pedemonte <[email protected]>
• st: RE: Machado - Mata Stata command
  • From: "Rubil Ivica" <[email protected]>
• Re: st: Machado - Mata Stata command
  • From: Christophe Kolodziejczyk <[email protected]>
• Re: st: Creating a Peer-Variable excluding the focal entity
  • From: Nick Cox <[email protected]>
• st: Machado - Mata Stata command
  • From: karen15555 <[email protected]>
• Re: st: granger causality test
  • From: Anderson Macedo de Jesus <[email protected]>
• st: Creating a Peer-Variable excluding the focal entity
  • From: Houdou Basse Mama <[email protected]>
• Re: [SPAM] Re: st: sum the variable based on other variables
  • From: Nick Cox <[email protected]>
• Re: [SPAM] Re: st: sum the variable based on other variables
  • From: wanhaiyou <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: John Antonakis <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Cox <[email protected]>
• Re: st: sum the variable based on other variables
  • From: Nick Cox <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Maarten Buis <[email protected]>
• Re: st: logit model with endogenous
  • From: John Antonakis <[email protected]>
• st: 3 levels of variation, 1 fully nested in the 2nd--which Fixed Effects are needed?
  • From: Jen Zhen <[email protected]>
• st: sum the variable based on other variables
  • From: wanhaiyou <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Cox <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: "Yu Chen, PhD" <[email protected]>
• st: More on margins after multinomial probit using cmp
  • From: Alfonso Sánchez-Peñalver <[email protected]>
• st: RE: RE: pscore and attnd
  • From: Rossella Verzulli <[email protected]>
• RE: st: granger causality test
  • From: DE SOUZA Eric <[email protected]>
• st: Confidence intervals after -xtmixed-
  • From: "P. Praeg" <[email protected]>
• Re: st: granger causality test
  • From: Prakash Singh <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Cox <[email protected]>
• st: RE: pscore and attnd
  • From: Joe Canner <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: "Yu Chen, PhD" <[email protected]>
• Re: st: Average of last two previous observations conditional on another variable value
  • From: Nick Cox <[email protected]>
• Re: st: granger causality test
  • From: Nick Cox <[email protected]>
• st: decrease ll nested models sem
  • From: Volker Lang <[email protected]>
• st: pscore and attnd
  • From: Rossella Verzulli <[email protected]>
• Re: st: How to graph
  • From: Roberto Ferrer <[email protected]>
• Re: st: Average of last two previous observations conditional on another variable value
  • From: Nick Cox <[email protected]>
• Re: st: granger causality test
  • From: Anderson Macedo de Jesus <[email protected]>
• st: Average of last two previous observations conditional on another variable value
  • From: Irene Ferrari <[email protected]>
• Re: st: Phase difference between different sine waves
  • From: Nick Cox <[email protected]>
• Re: st: granger causality test
  • From: Nick Cox <[email protected]>
• st: Phase difference between different sine waves
  • From: Nilay Kumar <[email protected]>
• st: Best strategy: Multilevel model or other?
  • From: Richard Moverare <[email protected]>
• st: Hausman-Taylor estimator
  • From: "Ejebu, Ourega-Zoe" <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: natalia malancu <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: cesare riillo <[email protected]>
• Re: st: logit model with endogenous
  • From: John Antonakis <[email protected]>
• st: granger causality test
  • From: Anderson Macedo de Jesus <[email protected]>
• RE: st: RE: RE: 'Fuzzy' text match
  • From: David Kantor <[email protected]>
• Re: st: Converting table into matrix
  • From: R Zhang <[email protected]>
• Re: st: Dummies for before, during and after treatment years
  • From: Nick Cox <[email protected]>
• Re: st: logit model with endogenous
  • From: Richard Williams <[email protected]>
• Re: st: RE: Drop under several conditions and time (year)
  • From: Julian Kochan <[email protected]>
• st: logit model with endogenous
  • From: maggie zhang <[email protected]>
• Re: st: RE: Drop under several conditions and time (year)
  • From: Nick Cox <[email protected]>
• st: Rolling does not roll properly
  • From: Micha Schildmann <[email protected]>
• RE: st: RE: RE: 'Fuzzy' text match
  • From: Joe Canner <[email protected]>
• st: Dummies for before, during and after treatment years
  • From: micono tzinbunoc <[email protected]>
• Re: st: RE: RE: 'Fuzzy' text match
  • From: Robert Davidson <[email protected]>
• st: RE: RE: 'Fuzzy' text match
  • From: Joe Canner <[email protected]>
• st: RE: 'Fuzzy' text match
  • From: Joe Canner <[email protected]>
• RE: st: RE: Drop under several conditions and time (year)
  • From: Joe Canner <[email protected]>
• st: 'Fuzzy' text match
  • From: Robert Davidson <[email protected]>
• Re: st: RE: Drop under several conditions and time (year)
  • From: Julian Kochan <[email protected]>
• Re: st: Drop under several conditions and time (year)
  • From: "Brill, Robert" <[email protected]>
• Re: st: Drop under several conditions and time (year)
  • From: "Brill, Robert" <[email protected]>
• st: RE: Drop under several conditions and time (year)
  • From: Joe Canner <[email protected]>
• st: RE: encode command and then drop
  • From: Joe Canner <[email protected]>
• st: encode command and then drop
  • From: Julian Kochan <[email protected]>
• st: Drop under several conditions and time (year)
  • From: Julian Kochan <[email protected]>
• Re: st: Drop Command with several conditions on 2 variables
  • From: Nick Cox <[email protected]>
• st: Drop Command with several conditions on 2 variables
  • From: Julian Kochan <[email protected]>
• st: Margins after cmp mprobit
  • From: Alfonso Sanchez-Penalver <[email protected]>
• Re: st: tabulation with weights
  • From: Abu Camara <[email protected]>
• Re: st: tabulation with weights
  • From: Nick Cox <[email protected]>
• Re: st: Fwd: rolling regression with if var<mean
  • From: Nick Cox <[email protected]>
• st: tabulation with weights
  • From: Abu Camara <[email protected]>
• st: Fwd: rolling regression with if var<mean
  • From: Sina Öfinger <[email protected]>
• st: Update to program - tuples - on SSC
  • From: Joseph Luchman <[email protected]>
• RE: st: ambiguity in -if- qualifier
  • From: Joe Canner <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Cox <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: "Yu Chen, PhD" <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: Adam Olszewski <[email protected]>
• Re: st: ambiguity in -if- qualifier
  • From: Nick Cox <[email protected]>
• st: ambiguity in -if- qualifier
  • From: "Yu Chen, PhD" <[email protected]>
• st: Fwd: gmm with ordered dependent var
  • From: "Anat (Manes) Tchetchik" <[email protected]>
• Re: st: [...] drop command with several conditions
  • From: Nick Cox <[email protected]>
• Re: st: STATA Question: drop command with several conditions
  • From: Roberto Liebscher <[email protected]>
• st: STATA Question: drop command with several conditions
  • From: Julian Kochan <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: natalia malancu <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: natalia malancu <[email protected]>
• Re: st: Converting table into matrix
  • From: Sergiy Radyakin <[email protected]>
• st: Converting table into matrix
  • From: R Zhang <[email protected]>
• Re: st: use13save12
  • From: Sergiy Radyakin <[email protected]>
• Re: st: use13save12
  • From: R Zhang <[email protected]>
• Re: st: New command -tfv- available from SSC
  • From: daniel klein <[email protected]>
• Re: st: use13save12
  • From: Sergiy Radyakin <[email protected]>
• Re: st: How to graph
  • From: Kisil ktl <[email protected]>
• Re: st: use13save12
  • From: Steven Nakoneshny <[email protected]>
• Re: st: merge with random assignment
  • From: R Zhang <[email protected]>
• st: use13save12
  • From: R Zhang <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: Adam Olszewski <[email protected]>
• st: output with attnd command
  • From: Yvonne Cao <[email protected]>
• Re: st: "continue on next page" for SJ article using LaTeX
  • From: "Ariel Linden" <[email protected]>
• RE: st: inlist() equivalent for mata?
  • From: Andrew Maurer <[email protected]>
• Re: st: inlist() equivalent for mata?
  • From: "William Gould, StataCorp LP" <[email protected]>
• RE: st: inlist() equivalent for mata?
  • From: Andrew Maurer <[email protected]>
• Re: st: "continue on next page" for SJ article using LaTeX
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: "continue on next page" for SJ article using LaTeX
  • From: Stas Kolenikov <[email protected]>
• st: "continue on next page" for SJ article using LaTeX
  • From: "Ariel Linden" <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: natalia malancu <[email protected]>
• Re: st: Fitting a model when the outcome is a proportion - glm versus logistic command
  • From: anny fenton <[email protected]>
• st: Modified Two-Way Tables?
  • From: ROBERT RYAN ARCIAGA <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: Adam Olszewski <[email protected]>
• Re: st: Fitting a model when the outcome is a proportion - glm versus logistic command
  • From: Richard Goldstein <[email protected]>
• Re: st: Propensity score matching after multiple imputation
  • From: William Buchanan <[email protected]>
• st: RE: Fitting a model when the outcome is a proportion - glm versus logistic command
  • From: Joe Canner <[email protected]>
• st: Fitting a model when the outcome is a proportion - glm versus logistic command
  • From: anny fenton <[email protected]>
• st: First Post
  • From: ROBERT RYAN ARCIAGA <[email protected]>
• Re: st: New command -tfv- available from SSC
  • From: Austin Nichols <[email protected]>
• Re: st: inlist() equivalent for mata?
  • From: Aljar Meesters <[email protected]>
• st: Propensity score matching after multiple imputation
  • From: natalia malancu <[email protected]>
• st: New command -tfv- available from SSC
  • From: daniel klein <[email protected]>
• Re: Re: st: heckprob using multiple imputation
  • From: Klaus Nowotny <[email protected]>
• Re: st: merge with random assignment
  • From: Phil Schumm <[email protected]>
• Re: st: How to graph
  • From: Roberto Ferrer <[email protected]>
• st: merge with random assignment
  • From: R Zhang <[email protected]>
• Re: st: inlist() equivalent for mata?
  • From: Phil Schumm <[email protected]>
• st: SSC Archive activity, February 2014
  • From: Christopher Baum <[email protected]>
• Re: st: gllamm - multilevel models and complex samples
  • From: Stas Kolenikov <[email protected]>
• RE: st: inlist() equivalent for mata?
  • From: Andrew Maurer <[email protected]>
• Re: st: How to graph
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: How to graph
  • From: Kisil ktl <[email protected]>
• RE: st: Problem with bfit command for model selection
  • From: Joe Canner <[email protected]>
• RE: st: FW: Aggregating values back to a certain row
  • From: Daniel Stefan Hain <[email protected]>
• st: RE: Match treated to not-treated firms
  • From: "Radwin, David" <[email protected]>
• Re: st: Including interaction term when using hireg
  • From: Richard Williams <[email protected]>
• RE: st: Problem with bfit command for model selection
  • From: Joe Canner <[email protected]>
• Re: st: Problem with bfit command for model selection
  • From: Nick Cox <[email protected]>
• st: Including interaction term when using hireg
  • From: Katherine Picho <[email protected]>
• RE: st: Problem with bfit command for model selection
  • From: Joe Canner <[email protected]>
• Re: st: merge error - not Stata format
  • From: Sergiy Radyakin <[email protected]>
• Re: st: cmp command; mvtobit
  • From: "Aurélie P. Harou" <[email protected]>
• Re: st: cmp command; mvtobit
  • From: Alfonso Sanchez-Penalver <[email protected]>
• st: cmp command; mvtobit
  • From: "Aurélie P. Harou" <[email protected]>
• st: merge error - not Stata format
  • From: June Bridge <[email protected]>
• st: gllamm - multilevel models and complex samples
  • From: "Porter, Stephen (Contractor)" <srporter/[email protected]>
• Re: st: testing difference between weighted vs unweighted means
  • From: Nick Cox <[email protected]>
• Re: st: testing difference between weighted vs unweighted means
  • From: Nick Cox <[email protected]>
• st: testing difference between weighted vs unweighted means
  • From: ramesh <[email protected]>
• Re: st: multproc
  • From: "Roger B. Newson" <[email protected]>
• Re: st: Problem with bfit command for model selection
  • From: Lubo Larsson <[email protected]>
• Re: st: Problem with bfit command for model selection
  • From: Richard Goldstein <[email protected]>
• Re: st: Match treated to not-treated firms
  • From: Austin Nichols <[email protected]>
• st: Problem with bfit command for model selection
  • From: Lubo Larsson <[email protected]>
• Re: Re: st: margins [,over()] after xtreg-fe not estimable
  • From: Alessandro Martinello <[email protected]>
• Re: st: inlist() equivalent for mata?
  • From: "William Gould, StataCorp LP" <[email protected]>
• st: RE: Match treated to not-treated firms
  • From: Joe Canner <[email protected]>
• Re: Re: st: sem mediation analysis - categorial mediator
  • From: "Ariel Linden" <[email protected]>
• Re: st: FW: Aggregating values back to a certain row
  • From: Jeph Herrin <[email protected]>
• Re: st: FW: Aggregating values back to a certain row
  • From: Nick Cox <[email protected]>
• Re: st: FW: Aggregating values back to a certain row
  • From: Nick Cox <[email protected]>
• Re: st: FW: Aggregating values back to a certain row
  • From: Jeph Herrin <[email protected]>
• st: Match treated to not-treated firms
  • From: Laura-Sophie Henning <[email protected]>
• Re: st: Standard errors for difference-in-differences
  • From: Michael <[email protected]>
• Re: st: Creating an id variable from one of each (string) observations in 6 variables
  • From: Nick Cox <[email protected]>
• st: Creating an id variable from one of each (string) observations in 6 variables
  • From: Jonas Klarin <[email protected]>
• Re: st: multproc
  • From: "Roger B. Newson" <[email protected]>
• st: Three Fixed Effects with Millions of Observations
  • From: Paulo Guimaraes <[email protected]>
• Re: st: the mixed command and accessing the estimated variances of random effects
  • From: Maarten Buis <[email protected]>
• st: Random slope model in runmlwin
  • From: Ashish Gupta <[email protected]>
• st: Treatment effect with endogenous treatment for multinominal outcomes
  • From: Sawa Omori <[email protected]>
• st: multproc
  • From: Char Adams <[email protected]>
• st: the mixed command and accessing the estimated variances of random effects
  • From: "Ben Highton" <[email protected]>
• Re: st: Three Fixed Effects with Millions of Observations
  • From: William Buchanan <[email protected]>
• Re: st: Three Fixed Effects with Millions of Observations
  • From: Fernando Rios Avila <[email protected]>
• Re: st: rclass program in rolling
  • From: Steve Samuels <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: Steve Samuels <[email protected]>
• st: Three Fixed Effects with Millions of Observations
  • From: George Shoukry <[email protected]>
• Re: st: replacing values problem
  • From: Sergiy Radyakin <[email protected]>
• Re: st: replacing values problem
  • From: Nick Cox <[email protected]>
• Re: st: margins [,over()] after xtreg-fe not estimable
  • From: Scott Merryman <[email protected]>
• st: replacing values problem
  • From: Paula Smith <[email protected]>
• Re: st: FW: Aggregating values back to a certain row
  • From: Nick Cox <[email protected]>
• Re: st: RE: adding a new variable to a dataset
  • From: Jean Sepulveda <[email protected]>
• Re: st: adding a new variable to a dataset
  • From: Fernando Rios Avila <[email protected]>
• st: -devnplot- updated on SSC
  • From: Nick Cox <[email protected]>
• st: FW: Aggregating values back to a certain row
  • From: Daniel Stefan Hain <[email protected]>
• st: RE: adding a new variable to a dataset
  • From: Joe Canner <[email protected]>
• Re: st: adding a new variable to a dataset
  • From: Nick Cox <[email protected]>
• st: adding a new variable to a dataset
  • From: Jean Sepulveda <[email protected]>
• RE: st: Import Excel: last for columns ignored
  • From: Joe Canner <[email protected]>
• st: RE: RE: RE: inlist() equivalent for mata?
  • From: Joe Canner <[email protected]>
• st: RE: RE: inlist() equivalent for mata?
  • From: Andrew Maurer <[email protected]>
• Re: st: sem mediation analysis - categorial mediator
  • From: William Buchanan <[email protected]>
• st: Update to mkcorr
  • From: Glenn Hoetker <[email protected]>
• st: New package -dta2html- available on SSC
  • From: "P. Wilner Jeanty" <[email protected]>
• st: RE: inlist() equivalent for mata?
  • From: Joe Canner <[email protected]>
• Re: st: sem mediation analysis - categorial mediator
  • From: John Antonakis <[email protected]>
• Re: st: sem mediation analysis - categorial mediator
  • From: [email protected]
• [no subject]
  • From: Unknown
• st: New version of -spmlreg- and -spwmatrix- available on SSC
  • From: "P. Wilner Jeanty" <[email protected]>
• st: inlist() equivalent for mata?
  • From: Andrew Maurer <[email protected]>
• RE: st: Import Excel: last for columns ignored
  • From: Joe Canner <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: T A <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Nick Cox <[email protected]>
• RE: st: generating number list depending on another variable
  • From: Joe Canner <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Patricia Biedermann <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Richard Goldstein <[email protected]>
• RE: st: generating number list depending on another variable
  • From: Joe Canner <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Patricia Biedermann <[email protected]>
• st: margins [,over()] after xtreg-fe not estimable
  • From: Alessandro Martinello <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Richard Goldstein <[email protected]>
• Fwd: st: Standard errors for difference-in-differences
  • From: Clyde Schechter <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Patricia Biedermann <[email protected]>
• Re: st: generating number list depending on another variable
  • From: Richard Goldstein <[email protected]>
• st: generating number list depending on another variable
  • From: Patricia Biedermann <[email protected]>
• Re: st: Standard errors for difference-in-differences
  • From: Clyde Schechter <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: Austin Nichols <[email protected]>
• st: mata competing risks with discrete distribution of frailty
  • From: "Amparo Nagore Garcia" <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: Nick Cox <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: Jeph Herrin <[email protected]>
• Re: st: Best Logistic Regression Model
  • From: Richard Williams <[email protected]>
• RE: st: Import Excel: last for columns ignored
  • From: Joe Canner <[email protected]>
• st: Hausman-Taylor estimator
  • From: "Ejebu, Ourega-Zoe" <[email protected]>
• Re: st: Re: Motionchart
  • From: Nick Cox <[email protected]>
• st: rclass program in rolling
  • From: John Doe <[email protected]>
• st: Best Logistic Regression Model
  • From: T A <[email protected]>
• st: RE: Re: Motionchart
  • From: Ge Yu <[email protected]>
• Re: st: sem mediation analysis - categorial mediator
  • From: John Antonakis <[email protected]>
• st: Graph for main and interaction effect after xtmixed‏
  • From: mehdi bakhtiar <[email protected]>
• st: sem mediation analysis - categorial mediator
  • From: [email protected]
• Re: st: Looping through parallel lists
  • From: "Thirukumaran, Caroline Pinto" <[email protected]>
• st: Standard errors for difference-in-differences
  • From: Michael Thiombendia <[email protected]>
• Re: st: Import Excel: last for columns ignored
  • From: Sergiy Radyakin <[email protected]>
• st: estimation question regarding SP data with "opt-out" (not interested) option
  • From: "Anat (Manes) Tchetchik" <[email protected]>
• Re: st: Estout results of two SURs with the same regressors
  • From: Francesco Scervini <[email protected]>
• Re: st: Implementation of the multinomial logit model with fixed effects
  • From: Klaus Pforr <[email protected]>
• Re: st: Looping through parallel lists
  • From: Russell Dimond <[email protected]>
• Re: Re: st: first stage results using ivregress with vce(cluster)
  • From: Souvik Banerjee <[email protected]>
• Re: st: How to graph
  • From: Carlos Avellaneda Suárez <[email protected]>
• st: effect size and power for manova :stata 12 Inbox x
  • From: hamzah ritchi <[email protected]>
• st: Looping through parallel lists
  • From: "Thirukumaran, Caroline Pinto" <[email protected]>
• st: Re: Motionchart
  • From: Ziad Khatib <[email protected]>
• Re: st: correlating responses within the same variable
  • From: Nick Cox <[email protected]>
• st: correlating responses within the same variable
  • From: Patrick Abi Nader <[email protected]>
• st: How to graph
  • From: Kisil ktl <[email protected]>
• st: Implementation of the multinomial logit model with fixed effects
  • From: Kai Yeung <[email protected]>
• [no subject]
  • From: Unknown
• st: RE: -mi estimate: mean <var>-: why no SE reported?
  • From: <[email protected]>
• st: Re: Motionchart
  • From: Nick Cox <[email protected]>
• Re: st: -mi estimate: mean <var>-: why no SE reported?
  • From: daniel klein <[email protected]>
• Re: st: access to rule-of-thumb bandwidth for local regressions
  • From: Nick Cox <[email protected]>
• st: -mi estimate: mean <var>-: why no SE reported?
  • From: <[email protected]>
• st: new package -vselect- available in SSC
  • From: Charles Lindsey <[email protected]>
• st: Best practices for using estout / esttab with LaTeX ctable or threeparttable?
  • From: Bert Lloyd <[email protected]>
• st: RE: tricky putexcel syntax
  • From: Joe Canner <[email protected]>
• Re: st: String problem
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: working with more than one files in stata.
  • From: Nick Cox <[email protected]>
• Re: st: RE: String problem
  • From: Nick Cox <[email protected]>
• Re: st: working with more than one files in stata.
  • From: Austin Nichols <[email protected]>
• st: RE: String problem
  • From: Joe Canner <[email protected]>
• Re: st: String problem
  • From: Nick Cox <[email protected]>
• RE: st: Import Excel: last for columns ignored
  • From: Joe Canner <[email protected]>
• Re: st: creating a new variable with different values for each record considering values in two different variables
  • From: Nick Cox <[email protected]>
• st: String problem
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: working with more than one files in stata.
  • From: Nick Cox <[email protected]>
• st: creating a new variable with different values for each record considering values in two different variables
  • From: Raffaele Palladino <[email protected]>
• Re: st: heckprob using multiple imputation
  • From: Marcus L Britton <[email protected]>
• RE: st: automatically added decimals in Stata
  • From: "Ruizendaal, Esmee" <[email protected]>
• Re: st: access to rule-of-thumb bandwidth for local regressions
  • From: László Sándor <[email protected]>
• st: RE: working with more than one files in stata.
  • From: Joe Canner <[email protected]>
• Re: st: automatically added decimals in Stata
  • From: Richard Goldstein <[email protected]>
• st: automatically added decimals in Stata
  • From: "Ruizendaal, Esmee" <[email protected]>
• st: working with more than one files in stata.
  • From: Theocharis Kromydas <[email protected]>
• st: Estout results of two SURs with the same regressors
  • From: Francesco Scervini <[email protected]>
• Re: st: Using the ASCII Code Character Map
  • From: Jeph Herrin <[email protected]>
• Re: st: Selecting only certain labels for categorical variable in bar graph
  • From: Nick Cox <[email protected]>
• st: tricky putexcel syntax
  • From: Nick Bornschein <[email protected]>
• st: Selecting only certain labels for categorical variable in bar graph
  • From: Gilad Isaacs <[email protected]>
• RE: st: Using the ASCII Code Character Map
  • From: Bruno Skrinjaric <[email protected]>
• Re: st: summarizing data for each panel over chosen time windows
  • From: R Zhang <[email protected]>
• st: summarizing data for each panel over chosen time windows
  • From: R Zhang <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Steve Samuels <[email protected]>
• st: new package -smvcir- available in SSC
  • From: Charles Lindsey <[email protected]>
• RE: st: RE: Changing titles of graphs in a loop without doing all the graphs again
  • From: Kieran McCaul <[email protected]>
• st: RE: Forvalues to make a moving average on non timeseries data.
  • From: Kieran McCaul <[email protected]>
• RE: st: RE: Changing titles of graphs in a loop without doing all the graphs again
  • From: "Radwin, David" <[email protected]>
• Re: st: Forvalues to make a moving average on non timeseries data.
  • From: "William Gould, StataCorp LP" <[email protected]>
• AW: st: Resampling and compare full sample with subsamples
  • From: Johannes Thrul <[email protected]>
• Re: st: RE: Changing titles of graphs in a loop without doing all the graphs again
  • From: Benjamin Villena Roldan <[email protected]>
• Re: st: access to rule-of-thumb bandwidth for local regressions
  • From: Nick Cox <[email protected]>
• st: Comparing diagnostic likelihood ratios
  • From: Eduardo Moreira <[email protected]>
• st: access to rule-of-thumb bandwidth for local regressions
  • From: László Sándor <[email protected]>
• st: RE: Changing titles of graphs in a loop without doing all the graphs again
  • From: "Radwin, David" <[email protected]>
• Re: st: Forvalues to make a moving average on non timeseries data.
  • From: Nick Cox <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Roger Cremades Rodeja <[email protected]>
• st: RE: RE: RE: RE: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Joe Canner <[email protected]>
• st: Forvalues to make a moving average on non timeseries data.
  • From: "Snapp, Kevin Michael" <[email protected]>
• st: RE: RE: RE: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Micha Schildmann <[email protected]>
• Re: st: Import Excel: last for columns ignored
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Using the ASCII Code Character Map
  • From: Nick Cox <[email protected]>
• st: Using the ASCII Code Character Map
  • From: Bruno Skrinjaric <[email protected]>
• st: New package -orth_out- on SSC
  • From: Joe Long <[email protected]>
• st: tobit: missing columns in regression output
  • From: "Derbyshire, James" <[email protected]>
• st: New package -combomarginsplot-
  • From: Nick Winter <[email protected]>
• Re: st: mfx failing with tobit?
  • From: Maarten Buis <[email protected]>
• st: FW: margins with 3-way interaction
  • From: Theocharis Kromydas <[email protected]>
• st: Re: Bizzare return code in Mata
  • From: "Thomas, Anthony" <[email protected]>
• st: Bizzare return code in Mata
  • From: "Thomas, Anthony" <[email protected]>
• st: New package -cibar- on SSC
  • From: Alexander Staudt <[email protected]>
• Re: st: RE: estat endogenous after gmm
  • From: "Anat (Manes) Tchetchik" <[email protected]>
• st: RE: estat endogenous after gmm
  • From: "Schaffer, Mark E" <[email protected]>
• st: estat endogenous after gmm
  • From: "Anat (Manes) Tchetchik" <[email protected]>
• st: mfx failing with tobit?
  • From: Roger Cremades Rodeja <[email protected]>
• st: New version of -polyspline- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: plots for main and interaction effect after xtmixed‏
  • From: mehdi bakhtiar <[email protected]>
• st: RE: RE: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Joe Canner <[email protected]>
• Re: st: RE: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Micha Schildmann <[email protected]>
• st: Regression with categorical ordinal Y and nonlinear complex function of X's
  • From: Bloomberg Jenny <[email protected]>
• st: re: moderated mediation with multiple mediators
  • From: Amy Hale <[email protected]>
• Re: st: Changing titles of graphs in a loop without doing all the graphs again
  • From: Benjamin Villena Roldan <[email protected]>
• st: Piecewise regression using panel data
  • From: Sunkee Lee <[email protected]>
• Re: st: ATT greater than one
  • From: Isobel Williams <[email protected]>
• re: st: ATT greater than one
  • From: "Ariel Linden" <[email protected]>
• Re: st: Figure 3 in Juhn-Murphy-Pierce(1993)
  • From: Nick Cox <[email protected]>
• RE: st: Figure 3 in Juhn-Murphy-Pierce(1993)
  • From: Işıl kutal <[email protected]>
• st: margins with 3-way interaction
  • From: Theocharis Kromydas <[email protected]>
• Re: st: Figure 3 in Juhn-Murphy-Pierce(1993)
  • From: Nick Cox <[email protected]>
• st: Figure 3 in Juhn-Murphy-Pierce(1993)
  • From: Işıl kutal <[email protected]>
• st: Am I using the margins command with ivregress properly?
  • From: "Sraboni, Esha (IFPRI-Dhaka)" <[email protected]>
• Re: st: Changing titles of graphs in a loop without doing all the graphs again
  • From: Benjamin Villena Roldan <[email protected]>
• st: Changing titles of graphs in a loop without doing all the graphs again
  • From: Benjamin Villena Roldan <[email protected]>
• st: ATT greater than one
  • From: Isobel Williams <[email protected]>
• st: New version of -rtfutil- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: heckprob using multiple imputation
  • From: Klaus Nowotny <[email protected]>
• Re: Re: st: first stage results using ivregress with vce(cluster)
  • From: Christopher Baum <[email protected]>
• Re: st: Rowonmiss error?
  • From: "Brill, Robert" <[email protected]>
• Re: st: Rowonmiss error?
  • From: "Brill, Robert" <[email protected]>
• Re: st: Rowonmiss error?
  • From: Richard Stoll <[email protected]>
• st: Rowonmiss error?
  • From: John Whitmer <[email protected]>
• Fwd: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Steve Samuels <[email protected]>
• Fwd: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Steve Samuels <[email protected]>
• RE: st: Identify observations that appear in a list
  • From: Joe Canner <[email protected]>
• Re: st: Identify observations that appear in a list
  • From: R Zhang <[email protected]>
• st: Import Excel: last for columns ignored
  • From: Joe Canner <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• RE: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• st: RE: RE: RE: Extracting results from -rolling- in one file per window
  • From: Joe Canner <[email protected]>
• Re: st: A faster way to gsort
  • From: Clyde Schechter <[email protected]>
• st: RE: RE: Extracting results from -rolling- in one file per window
  • From: Micha Schildmann <[email protected]>
• Re: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: David Hoaglin <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Suryadipta Roy <[email protected]>
• Re: large data sets (was st: A faster way to gsort)
  • From: Jeph Herrin <[email protected]>
• RE: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: William Buchanan <[email protected]>
• RE: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: David Hoaglin <[email protected]>
• st: Single p-value for categorical var in modified poisson
  • From: Kassie Melius <[email protected]>
• st: -mi impute chained (logit)- goes through many iterations without change in log likelihood...
  • From: Anand Segar <[email protected]>
• RE: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: John Antonakis <[email protected]>
• RE: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: John Antonakis <[email protected]>
• st: Statistical Significance of the difference between two estimates from two separate regressions
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: Obtaining a average replications from a random draw
  • From: Maarten Buis <[email protected]>
• Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Bartus Tamás" <[email protected]>
• Re: st: Identify observations that appear in a list
  • From: R Zhang <[email protected]>
• st: Calculating marginal effects in nonlinear models
  • From: Boon Han Koh <[email protected]>
• Re: large data sets (was st: A faster way to gsort)
  • From: "Joseph Coveney" <[email protected]>
• Re: st: combine catplot graphs
  • From: Nick Cox <[email protected]>
• st: Nearmrg deleting merged observations
  • From: Jaclene Begley <[email protected]>
• Re: st: Mata invalid opcode error message
  • From: "Parham, Robert" <[email protected]>
• Re: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Steve Samuels <[email protected]>
• Re: st: RE: Adding kaplan meier curve from general population to kaplan meier curve from dataset
  • From: Michael Stewart <[email protected]>
• Aw: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Marie-Luise Schmitz" <[email protected]>
• Re: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Steve Samuels <[email protected]>
• Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Bartus Tamás" <[email protected]>
• Aw: RE: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Marie-Luise Schmitz" <[email protected]>
• Re: st: Obtaining a average replications from a random draw
  • From: Theophilus Dapel <[email protected]>
• Re: st: Obtaining a average replications from a random draw
  • From: Fernando Rios Avila <[email protected]>
• RE: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: Joe Canner <[email protected]>
• Re: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: Nick Cox <[email protected]>
• st: Obtaining a average replications from a random draw
  • From: Theophilus Dapel <[email protected]>
• RE: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: Joe Canner <[email protected]>
• Re: st: RE: Dynamic model
  • From: Theophilus Dapel <[email protected]>
• Re: st: RE: Dynamic model
  • From: "Millimet, Daniel" <[email protected]>
• Re: st: RE: Dynamic model
  • From: Theophilus Dapel <[email protected]>
• Aw: Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Marie-Luise Schmitz" <[email protected]>
• st: sem model fit with svy prefix
  • From: "Brian Carolan" <[email protected]>
• Re: st: Descriptive statistics table for continuous variables by several subgroups
  • From: Michael McCulloch <[email protected]>
• st: Descriptive statistics table for continuous variables by several subgroups
  • From: "Marie-Luise Schmitz" <[email protected]>
• st: how to make sttocc suitable for case-cohort?
  • From: "Simons Colinda (EPID)" <[email protected]>
• st: Using SEM for a multi-level SUREG
  • From: Robert Kraut <[email protected]>
• st: combine catplot graphs
  • From: "Antonio Rodriguez Andres" <[email protected]>
• st: RE: Extracting results from -rolling- in one file per window
  • From: Joe Canner <[email protected]>
• st: Extracting results from -rolling- in one file per window
  • From: Micha Schildmann <[email protected]>
• Re: st: do loops and mata
  • From: "Thomas, Anthony" <[email protected]>
• Re: st: do loops and mata
  • From: "Thomas, Anthony" <[email protected]>
• Re: st: -copydesc- or -clonevar- that behaves reasonably for factor variables
  • From: Nick Cox <[email protected]>
• RE: large data sets (was st: A faster way to gsort)
  • From: Joe Canner <[email protected]>
• RE: st: do loops and mata
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: "Knee, Alexander" <[email protected]>
• Re: st: do loops and mata
  • From: "Thomas, Anthony" <[email protected]>
• RE: st: do loops and mata
  • From: Joe Canner <[email protected]>
• RE: large data sets (was st: A faster way to gsort)
  • From: Andrew Maurer <[email protected]>
• st: -copydesc- or -clonevar- that behaves reasonably for factor variables
  • From: Ryan Turner <[email protected]>
• Re: st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Marcel Raab <[email protected]>
• RE: st: do loops and mata
  • From: <[email protected]>
• Re: st: do loops and mata
  • From: Nick Cox <[email protected]>
• RE: st: do loops and mata
  • From: <[email protected]>
• Re: large data sets (was st: A faster way to gsort)
  • From: Jeph Herrin <[email protected]>
• Re: st: From: Anna Zakharova <[email protected]>
  • From: Alfonso Sanchez-Penalver <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• st: RE: Adding kaplan meier curve from general population to kaplan meier curve from dataset
  • From: Joe Canner <[email protected]>
• Re: st: do loops and mata
  • From: Nick Cox <[email protected]>
• st: Convert Odds Ratios to Risk Ratios after clogit?
  • From: Marcel Raab <[email protected]>
• st: From: Anna Zakharova <[email protected]>
  • From: [email protected]
• st: do loops and mata
  • From: <[email protected]>
• Re: st: Identify observations that appear in a list
  • From: Nick Cox <[email protected]>
• RE: st: first stage results using ivregress with vce(cluster)
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Nick Cox <[email protected]>
• Re: st: Regression Analysis - dependent and independent variables
  • From: David Hoaglin <[email protected]>
• Re: st: Regression Analysis - dependent and independent variables
  • From: Roberto Liebscher <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Suryadipta Roy <[email protected]>
• st: Count Data with 2D Cluster
  • From: [email protected]
• st: Regression Analysis - dependent and independent variables
  • From: liliana <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Nick Cox <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Nick Cox <[email protected]>
• st: RE: Re: regression using generalized linear model
  • From: Aidan Trung Nguyen <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• Re: large data sets (was st: A faster way to gsort)
  • From: "Joseph Coveney" <[email protected]>
• Re: st: How does xtreg calculate clustered standard error?
  • From: Ting JIANG <[email protected]>
• Re: Re: st: simulate error
  • From: Christopher Baum <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Michael McCulloch <[email protected]>
• st: Identify observations that appear in a list
  • From: R Zhang <[email protected]>
• Re: st: RE: Re: estout
  • From: Yuesheng Wu <[email protected]>
• Re: st: Creating categories of Continuous Variable
  • From: Richard Williams <[email protected]>
• Re: st: How does xtreg calculate clustered standard error?
  • From: Steve Samuels <[email protected]>
• Re: st: Calculating dynamic average per observation
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: Re: comparing strings off by one character
  • From: Colin Hargreaves <[email protected]>
• st: Calculating dynamic average per observation
  • From: John Whitmer <[email protected]>
• st: Adding kaplan meier curve from general population to kaplan meier curve from dataset
  • From: Michael Stewart <[email protected]>
• st: Creating categories of Continuous Variable
  • From: Satyen Dubey <[email protected]>
• st: RE: RE: Re: comparing strings off by one character
  • From: "Brill, Robert" <[email protected]>
• st: RE: Re: comparing strings off by one character
  • From: Joe Canner <[email protected]>
• st: Re: comparing strings off by one character
  • From: Maria Boutchkova <[email protected]>
• large data sets (was st: A faster way to gsort)
  • From: Jeph Herrin <[email protected]>
• Re: Re: st: Time demean panel variables using -center command
  • From: Fernando Rios Avila <[email protected]>
• Re: Re: st: Time demean panel variables using -center command
  • From: Nick Cox <[email protected]>
• Re: Re: st: Time demean panel variables using -center command
  • From: Vaidyanathan Ganapathy <[email protected]>
• st: RE: Dynamic model
  • From: "Roychowdhury, Punarjit" <[email protected]>
• st: Dynamic model
  • From: Theophilus Dapel <[email protected]>
• Re: Re: st: Interpretation of Oaxaca decomposition results after re-transformation of log scale
  • From: Vaidyanathan Ganapathy <[email protected]>
• Re: st: twoway stacked bar charts
  • From: Nick Cox <[email protected]>
• RE: st: twoway stacked bar charts
  • From: "Impavido, Gregorio" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: twoway stacked bar charts
  • From: Nick Cox <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Nick Cox <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• RE: st: A faster way to gsort
  • From: Joe Canner <[email protected]>
• Re: st: A faster way to gsort
  • From: Nick Cox <[email protected]>
• st: mi impute chained truncreg
  • From: Leah Schinasi <[email protected]>
• RE: st: A faster way to gsort
  • From: Joe Canner <[email protected]>
• st: Re: st: 答复: Combine several variables into one
  • From: Nick Cox <[email protected]>
• st: 答复: Combine several variables into one
  • From: "Rubi Lam" <[email protected]>
• st: twoway stacked bar charts
  • From: "Impavido, Gregorio" <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Scott Merryman <[email protected]>
• RE: st: A faster way to gsort
  • From: Joe Canner <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Nirina F <[email protected]>
• RE: st: A faster way to gsort
  • From: Joe Canner <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Souvik Banerjee <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Alfonso Sanchez-Penalver <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Combine several variables into one
  • From: Nick Cox <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Souvik Banerjee <[email protected]>
• st: Combine several variables into one
  • From: "Rubi Lam" <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: William Buchanan <[email protected]>
• Re: st: How does xtreg calculate clustered standard error?
  • From: Ting JIANG <[email protected]>
• Re: st: How does xtreg calculate clustered standard error?
  • From: Austin Nichols <[email protected]>
• Re: st: Time demean panel variables using -center command
  • From: Austin Nichols <[email protected]>
• Re: st: Interpretation of Oaxaca decomposition results after re-transformation of log scale
  • From: Austin Nichols <[email protected]>
• Re: st: Time demean panel variables using -center command
  • From: Nick Cox <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Nick Cox <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Austin Nichols <[email protected]>
• Re: st: Why is the legend in xtline limited to 2 to 15?
  • From: Nick Cox <[email protected]>
• Re: st: -margins- and ratio interactions
  • From: Federico Belotti <[email protected]>
• Re: st: RE: Re: estout
  • From: Nick Cox <[email protected]>
• Re: st: Mata invalid opcode error message
  • From: Nick Cox <[email protected]>
• st: Why is the legend in xtline limited to 2 to 15?
  • From: Nirina F <[email protected]>
• Re: st: A faster way to gsort
  • From: Maarten Buis <[email protected]>
• st: Time demean panel variables using -center command
  • From: Vaidyanathan Ganapathy <[email protected]>
• st: Interpretation of Oaxaca decomposition results after re-transformation of log scale
  • From: Vaidyanathan Ganapathy <[email protected]>
• st: How does xtreg calculate clustered standard error?
  • From: Ting JIANG <[email protected]>
• Re: st: MLE problem could not converge
  • From: jie li <[email protected]>
• Re: st: RE: Re: estout
  • From: Yuesheng Wu <[email protected]>
• st: Mata invalid opcode error message
  • From: "Parham, Robert" <[email protected]>
• st: Translating smcl to pdf but want to change orientation of page
  • From: Garima <[email protected]>
• st: Re: regression using generalized linear model
  • From: "Joseph Coveney" <[email protected]>
• Re: st: -margins- and ratio interactions
  • From: Steve Samuels <[email protected]>
• RE: st: regression using generalized linear model
  • From: Aidan Trung Nguyen <[email protected]>
• Re: st: Distributional graph
  • From: Zuhumnan Dapel <[email protected]>
• RE: st: regression using generalized linear model
  • From: Joe Canner <[email protected]>
• RE: st: Distributional graph
  • From: "Radwin, David" <[email protected]>
• Re: st: Distributional graph
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Distributional graph
  • From: Nick Cox <[email protected]>
• st: Distributional graph
  • From: Theophilus Dapel <[email protected]>
• Re: st: Propensity Score Matching
  • From: Austin Nichols <[email protected]>
• Re: st: -margins- and ratio interactions
  • From: Richard Williams <[email protected]>
• Re: st: Standard error of predicted residuals
  • From: Theophilus Dapel <[email protected]>
• Re: st: Standard error of predicted residuals
  • From: Nick Cox <[email protected]>
• st: Standard error of predicted residuals
  • From: Theophilus Dapel <[email protected]>
• Re: st: regression using generalized linear model
  • From: Nick Cox <[email protected]>
• RE: st: regression using generalized linear model
  • From: Joe Canner <[email protected]>
• Re: st: regression using generalized linear model
  • From: "Trung (Aidan) Nguyen" <[email protected]>
• Re: st: regression using generalized linear model
  • From: Nick Cox <[email protected]>
• Re: st: Log transformation
  • From: Theophilus Dapel <[email protected]>
• Re: st: Log transformation
  • From: Richard Goldstein <[email protected]>
• st: RE: Log transformation
  • From: Joe Canner <[email protected]>
• RE: st: regression using generalized linear model
  • From: Joe Canner <[email protected]>
• st: Log transformation
  • From: Theophilus Dapel <[email protected]>
• Re: st: regression using generalized linear model
  • From: Nick Cox <[email protected]>
• st: regression using generalized linear model
  • From: Aidan Trung Nguyen <[email protected]>
• st: RE: Propensity Score Matching
  • From: Joe Canner <[email protected]>
• Re: st: RE: Re: estout
  • From: Nick Cox <[email protected]>
• Re: st: RE: Re: estout
  • From: Yuesheng Wu <[email protected]>
• st: Propensity Score Matching
  • From: Tarik Demp <[email protected]>
• st: RE: Re: estout
  • From: "Rubil Ivica" <[email protected]>
• st: Re: estout
  • From: Yuesheng Wu <[email protected]>
• Re: st: Calculating group average of the other group I am not a member of
  • From: Nick Cox <[email protected]>
• st: Calculating group average of the other group I am not a member of
  • From: Özgür Gürerk <[email protected]>
• Re: st: Adding error bars to bar chart
  • From: Ronan Conroy <[email protected]>
• Re: st: simulate error
  • From: Stas Kolenikov <[email protected]>
• Re: st: ZIP plotting interactions
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: -mylabels-
  • From: Nick Cox <[email protected]>
• RE: st: -mylabels-
  • From: Tim Evans <[email protected]>
• Re: st: -mylabels-
  • From: Nick Cox <[email protected]>
• Re: st: dummy variables
  • From: Nick Cox <[email protected]>
• Re: st: Date format from string
  • From: Nick Cox <[email protected]>
• st: A faster way to gsort
  • From: Andrew Maurer <[email protected]>
• st: -mylabels-
  • From: Tim Evans <[email protected]>
• st: dummy variables
  • From: Simone Angioloni <[email protected]>
• Re: st: Date format from string
  • From: Philipp Hagspiel <[email protected]>
• st: Multinomial logit and estout
  • From: "Seliger Florian" <[email protected]>
• Re: st: summing and reshaping the data
  • From: Nick Cox <[email protected]>
• st: sample selection and panel attrition
  • From: "Klaus Pforr" <[email protected]>
• st: trouble with mi impute chained lower upper limits truncreg
  • From: Leah Schinasi <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: simulate error
  • From: Nick Cox <[email protected]>
• Re: st: simulate error
  • From: Jeph Herrin <[email protected]>
• Re: st: simulate error
  • From: Mark Baerthel <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Alfonso Sánchez-Peñalver <[email protected]>
• Re: st: simulate error
  • From: Scott Merryman <[email protected]>
• Re: st: simulate error
  • From: Nick Cox <[email protected]>
• Re: st: summing and reshaping the data
  • From: "Thomas, Anthony" <[email protected]>
• st: -margins- and ratio interactions
  • From: Federico Belotti <[email protected]>
• st: summing and reshaping the data
  • From: Sara Neto Machado <[email protected]>
• Re: st: simulate error
  • From: Mark Baerthel <[email protected]>
• RE: st: Computing summary statistics for peer groups of each individual leaving out the individual herself
  • From: "Roychowdhury, Punarjit" <[email protected]>
• Re: st: simulate error
  • From: Nick Cox <[email protected]>
• st: GLM regression
  • From: Aidan Trung Nguyen <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Souvik Banerjee <[email protected]>
• st: simulate error
  • From: Mark Baerthel <[email protected]>
• Re: st: first stage results using ivregress with vce(cluster)
  • From: Alfonso Sanchez-Penalver <[email protected]>
• st: first stage results using ivregress with vce(cluster)
  • From: Souvik Banerjee <[email protected]>
• st: ZIP plotting interactions
  • From: Elizabeth Aguirre Lopez <[email protected]>
• Re: st: Date format from string
  • From: Nick Cox <[email protected]>
• st: Date format from string
  • From: Philipp Hagspiel <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Nick Cox <[email protected]>
• Re: st: problem with negative binomial fixed effect model
  • From: Nahla Betelmal <[email protected]>
• Re: st: Computing summary statistics for peer groups of each individual leaving out the individual herself
  • From: Nick Cox <[email protected]>
• Re: st: Reading text document
  • From: chamara Anuranga <[email protected]>
• st: Reading text document
  • From: chamara Anuranga <[email protected]>
• st: Re: Re: ANOVA with random effect
  • From: "Joseph Coveney" <[email protected]>
• st: Computing summary statistics for peer groups of each individual leaving out the individual herself
  • From: "Roychowdhury, Punarjit" <[email protected]>
• st: Re: ANOVA with random effect
  • From: "Joseph Coveney" <[email protected]>
• Re: st: multivariate lpoly
  • From: Steve Samuels <[email protected]>
• st: Regressing a first differenced variable on levels
  • From: Kuba Bembenek <[email protected]>
• Re: st: problem with negative binomial fixed effect model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: RE: Finding duplicate values across different variables
  • From: Joe Canner <[email protected]>
• Re: st: RE: Duplicate observations
  • From: emanuele mazzini <[email protected]>
• Re: st: Duplicate observations
  • From: emanuele mazzini <[email protected]>
• Re: st: RE: Finding duplicate values across different variables
  • From: Michael Goodwin <[email protected]>
• st: problem with negative binomial fixed effect model
  • From: Nahla Betelmal <[email protected]>
• RE: st: re-sorting display order after -encode-
  • From: "Radwin, David" <[email protected]>
• Re: st: Finding duplicate values across different variables
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: RE: Confidence interval for proportions
  • From: Steve Samuels <[email protected]>
• Re: st: panel data analysis advice
  • From: David Greenberg <[email protected]>
• Re: st: panel data analysis advice
  • From: Theophilus Dapel <[email protected]>
• st: panel data analysis advice
  • From: Robert Paul <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Jeph Herrin <[email protected]>
• st: RE: RE: RE: date calculation
  • From: Joe Canner <[email protected]>
• Re: st: RE: date calculation
  • From: Nick Cox <[email protected]>
• Re: st: RE: date calculation
  • From: Nick Cox <[email protected]>
• st: RE: RE: date calculation
  • From: "DeMichele, Matthew" <[email protected]>
• st: RE: date calculation
  • From: Joe Canner <[email protected]>
• Re: st: date calculation
  • From: Nick Cox <[email protected]>
• st: date calculation
  • From: "DeMichele, Matthew" <[email protected]>
• Re: st: multivariate lpoly
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: multivariate lpoly
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Nick Cox <[email protected]>
• RE: st: Posthoc power analysis for linear mixed effect model
  • From: Lance Erickson <[email protected]>
• Re: st: multivariate lpoly
  • From: Nick Cox <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Michael McCulloch <[email protected]>
• Re: st: multivariate lpoly
  • From: László Sándor <[email protected]>
• Re: st: RE: Duplicate observations
  • From: Nick Cox <[email protected]>
• st: RE: Duplicate observations
  • From: Joe Canner <[email protected]>
• Re: st: Duplicate observations
  • From: Nick Cox <[email protected]>
• st: Duplicate observations
  • From: emanuele mazzini <[email protected]>
• Re: Re: st: Generating days eligible when eligibility changes over time
  • From: Nick Cox <[email protected]>
• Re: st: multivariate lpoly
  • From: Nick Cox <[email protected]>
• st: RE: multivariate lpoly
  • From: "Gregory, Christian - ERS" <[email protected]>
• RE: st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• Re: st: How to get a temporary file handle within mata?
  • From: Phil Schumm <[email protected]>
• st: Reshape to long problems
  • From: Philipp Hagspiel <[email protected]>
• st: multivariate lpoly
  • From: László Sándor <[email protected]>
• Re: st: Instrument Validity tests for Heckman 1979
  • From: John Antonakis <[email protected]>
• st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• RE: Re: st: Generating days eligible when eligibility changes over time
  • From: "Brill, Robert" <[email protected]>
• Re: st: Add obs with values so each possible value occurs at least once
  • From: Nick Cox <[email protected]>
• st: Add obs with values so each possible value occurs at least once
  • From: Jen Zhen <[email protected]>
• st: Add obs with values so each possible value occurs at least once
  • From: Jen Zhen <[email protected]>
• st: How to get a temporary file handle within mata?
  • From: Andrew Maurer <[email protected]>
• st: RE: Confidence interval for proportions
  • From: Joe Canner <[email protected]>
• Re: st: Confidence interval for proportions
  • From: Nick Cox <[email protected]>
• Re: st: Get list of non-omitted variables after a regression
  • From: Ludovico Zaraga <[email protected]>
• st: Confidence interval for proportions
  • From: Peter Jansen <[email protected]>
• Re: st: Issues with missing values
  • From: Nick Cox <[email protected]>
• st: ANOVA with random effect
  • From: Ada Keding <[email protected]>
• Re: st: rescale coordinates using shp2dta, and point order using spmap
  • From: Maurizio Pisati <[email protected]>
• Re: st: Issues with missing values
  • From: Halua Koko <[email protected]>
• st: RE: Finding duplicate values across different variables
  • From: Joe Canner <[email protected]>
• Re: st: Error with -round()-
  • From: Nick Cox <[email protected]>
• Re: st: Baseline hazard in discrete time hazards model
  • From: Melaku Fekadu <[email protected]>
• st: Instrument Validity tests for Heckman 1979
  • From: "Kyrizi, Andri" <[email protected]>
• st: rescale coordinates using shp2dta, and point order using spmap
  • From: Pablo Bonilla <[email protected]>
• st: Finding duplicate values across different variables
  • From: Michael Goodwin <[email protected]>
• Re: st: Issues with missing values
  • From: Nick Cox <[email protected]>
• RE: st: Get list of non-omitted variables after a regression
  • From: Joe Canner <[email protected]>
• st: Issues with missing values
  • From: Halua Koko <[email protected]>
• Re: st: Get list of non-omitted variables after a regression
  • From: "Roger B. Newson" <[email protected]>
• RE: st: Get list of non-omitted variables after a regression
  • From: Joe Canner <[email protected]>
• Re: st: Error with -round()-
  • From: Jeph Herrin <[email protected]>
• Re: st: Get list of non-omitted variables after a regression
  • From: "Seed, Paul" <[email protected]>
• Re: st: RE: RE: Graph scheme - Setting font for titles
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: MLE problem could not converge
  • From: Fernando Rios Avila <[email protected]>
• st: DEA with very large datasets
  • From: James Wright <[email protected]>
• Re: st: Goodness of Fit Measure for Generalized Linear Models with Adjustment for the Number of Parameters
  • From: Nick Cox <[email protected]>
• Re: st: Significance Test
  • From: Nick Cox <[email protected]>
• Re: st: Significance Test
  • From: Naila Saeed <[email protected]>
• Re: st: Generating a row of dummies per ID based on multiple lines of panel data
  • From: Nick Cox <[email protected]>
• Re: st: Significance Test
  • From: Nick Cox <[email protected]>
• st: Generating a row of dummies per ID based on multiple lines of panel data
  • From: Mark Egan <[email protected]>
• st: Significance Test
  • From: Naila Saeed <[email protected]>
• Re: st: Goodness of Fit Measure for Generalized Linear Models with Adjustment for the Number of Parameters
  • From: Roberto Liebscher <[email protected]>
• Re: st: re-sorting display order after -encode-
  • From: Nick Cox <[email protected]>
• Re: st: extremes - not working
  • From: Nick Cox <[email protected]>
• st: extremes - not working
  • From: Oana Mihaescu <[email protected]>
• st: MLE problem could not converge
  • From: jie li <[email protected]>
• Re: st: -label define- and -replace- when a variable may be missing
  • From: Michael McCulloch <[email protected]>
• st: re-sorting display order after -encode-
  • From: Michael McCulloch <[email protected]>
• Re: st: -label define- and -replace- when a variable may be missing
  • From: "Joseph Coveney" <[email protected]>
• Re: st: Baseline hazard in discrete time hazards model
  • From: Steve Samuels <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Mohammod Mostazir <[email protected]>
• Re: st: Baseline hazard in discrete time hazards model
  • From: Melaku Fekadu <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Joerg Luedicke <[email protected]>
• Re: st: -label define- and -replace- when a variable may be missing
  • From: Phil Schumm <[email protected]>
• st: How can I combine several events or variables into one?
  • From: "Rubi Lam" <[email protected]>
• Re: st: Graphing mean and median on the same plot
  • From: Nick Cox <[email protected]>
• Re: st: Graphing mean and median on the same plot
  • From: Theophilus Dapel <[email protected]>
• Re: st: Graphing mean and median on the same plot
  • From: Nick Cox <[email protected]>
• Re: st: Regular expressions
  • From: Nick Cox <[email protected]>
• Re: st: Stat Transfer
  • From: Simon Moore <[email protected]>
• Re: st: Error with -round()-
  • From: Nick Cox <[email protected]>
• st: Re: -label define- and -replace- when a variable may be missing
  • From: "Joseph Coveney" <[email protected]>
• st: Re: Error with -round()-
  • From: "Joseph Coveney" <[email protected]>
• st: -label define- and -replace- when a variable may be missing
  • From: Michael McCulloch <[email protected]>
• Re: st: traveltime, error in Stata 12
  • From: Lucas Ferreira Mation <[email protected]>
• Re: st: Regular expressions
  • From: Roberto Ferrer <[email protected]>
• st: Error with -round()-
  • From: Matt Vivier <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Mohammod Mostazir <[email protected]>
• Re: st: Stata graph and tables in powerpoimt
  • From: Nick Cox <[email protected]>
• Re: st: aggregate time series data over individuals
  • From: Nick Cox <[email protected]>
• st: Xtabond2: problems with unbalanced data
  • From: ATANASOVSKA Viktorija <[email protected]>
• st: aggregate time series data over individuals
  • From: Philipp Hagspiel <[email protected]>
• Re: st: Get list of non-omitted variables after a regression
  • From: Scott Merryman <[email protected]>
• Re: st: Baseline hazard in discrete time hazards model
  • From: Melaku Fekadu <[email protected]>
• st: Get list of non-omitted variables after a regression
  • From: Ludovico Zaraga <[email protected]>
• st: Graphing mean and median on the same plot
  • From: Theophilus Dapel <[email protected]>
• st: Stata graph and tables in powerpoimt
  • From: [email protected]
• Re: st: Maximum number of instruments
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Stat Transfer
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Stat Transfer
  • From: jose maria pacheco de souza <[email protected]>
• Re: st: Stat Transfer
  • From: Nick Cox <[email protected]>
• st: Baseline hazard in discrete time hazards model
  • From: <[email protected]>
• st: Stat Transfer
  • From: Simon Moore <[email protected]>
• Re: st: programming for coskewness and cokurtosis
  • From: Austin Nichols <[email protected]>
• Re: st: Radom draw with replacement
  • From: Austin Nichols <[email protected]>
• Re: st: programming for coskewness and cokurtosis
  • From: Roberto Ferrer <[email protected]>
• Re: st: Radom draw with replacement
  • From: Nick Cox <[email protected]>
• st: Radom draw with replacement
  • From: Theophilus Dapel <[email protected]>
• Re: st: Dynamic almost ideal demand system
  • From: Nigussie Tefera <[email protected]>
• st: programming for coskewness and cokurtosis
  • From: [email protected]
• Re: st: Create a flag (panel data)
  • From: R Zhang <[email protected]>
• Re: st: Create a flag (panel data)
  • From: R Zhang <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Joerg Luedicke <[email protected]>
• Re: st: Dynamic almost ideal demand system
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• [no subject]
  • From: Unknown
• st: Baseline hazard in discrete time hazards model
  • From: Melaku Fekadu <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Steve Samuels <[email protected]>
• st: Maximum number of instruments
  • From: Ludovico Zaraga <[email protected]>
• st: RE: RE: Graph scheme - Setting font for titles
  • From: "Radwin, David" <[email protected]>
• st: RE: Graph scheme - Setting font for titles
  • From: "Radwin, David" <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Jeph Herrin <[email protected]>
• Re: st: traveltime, error in Stata 12
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Graph scheme - Setting font for titles
  • From: Carlos Avellaneda Suárez <[email protected]>
• st: Dynamic almost ideal demand system
  • From: Nigussie Tefera <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Joerg Luedicke <[email protected]>
• st: RE: traveltime, error in Stata 12
  • From: Joe Canner <[email protected]>
• st: traveltime, error in Stata 12
  • From: Lucas Ferreira Mation <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Jeph Herrin <[email protected]>
• Re: st: Dynamic quadratic almost ideal demand system
  • From: Nigussie Tefera <[email protected]>
• RE: st: Posthoc power analysis for linear mixed effect model
  • From: Lance Erickson <[email protected]>
• Re: st: Question about XTMIXED command (fwd)
  • From: Laura Gibbons <[email protected]>
• Re: st: Posthoc power analysis for linear mixed effect model
  • From: Jeph Herrin <[email protected]>
• st: Posthoc power analysis for linear mixed effect model
  • From: Mohammod Mostazir <[email protected]>
• Re: st: I can't get List to work
  • From: Robert Picard <[email protected]>
• Re: st: I can't get List to work
  • From: Nick Cox <[email protected]>
• st: RE: I can't get List to work
  • From: Joe Canner <[email protected]>
• st: I can't get List to work
  • From: "Snapp, Kevin Michael" <[email protected]>
• st: Question about XTMIXED command
  • From: Christina Wei <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Brendan Halpin <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Nick Cox <[email protected]>
• RE: st: growth rates
  • From: "Bornmann, Lutz" <[email protected]>
• st: Marginal effects after mvprobit
  • From: <[email protected]>
• Re: st: plain and robust st. errors below each other with estout, etc.
  • From: Stas Kolenikov <[email protected]>
• st: plain and robust st. errors below each other with estout, etc.
  • From: Maria Boutchkova <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Brendan Halpin <[email protected]>
• st: solution for paste function not working
  • From: David Roodman <[email protected]>
• RE: st: RE: Stata treatment of sort order
  • From: Joe Canner <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Brendan Halpin <[email protected]>
• Re: st: Calculating trendline in stata
  • From: Richard Goldstein <[email protected]>
• st: Calculating trendline in stata
  • From: Tinofa Mutevedzi <[email protected]>
• st: Reproducing results from -xtpmg-
  • From: Fredrik Vest <[email protected]>
• Re: st: growth rates
  • From: Nick Cox <[email protected]>
• RE: st: growth rates
  • From: "Bornmann, Lutz" <[email protected]>
• RE: st: Regular expressions
  • From: Joe Canner <[email protected]>
• Re: st: Regular expressions
  • From: Nick Cox <[email protected]>
• Re: st: Regular expressions
  • From: Nick Cox <[email protected]>
• RE: st: Regular expressions
  • From: Joe Canner <[email protected]>
• Re: st: Regular expressions
  • From: Marco Savegnago <[email protected]>
• Re: st: growth rates
  • From: Maarten Buis <[email protected]>
• RE: st: How do I identify whether an individual is related to another individual in my dataset?
  • From: Joe Canner <[email protected]>
• Re: st: growth rates
  • From: Nick Cox <[email protected]>
• st: growth rates
  • From: "Bornmann, Lutz" <[email protected]>
• Re: st: Generating days eligible when eligibility changes over time
  • From: Nick Cox <[email protected]>
• Re: st: Dear all, I am running a logit model with three dichotomous variables and other controls. I would like to plot the predictions of these three variables in one plot but I cannot figure out how to plot them so that they do not overlap in the graph. Is there a way to do this? xi:logit Dependent Jobless CurrentU IndirectU x1 x3 x5 i.x6 estimates store M1 margins , at(Jobless=(0 1) CurrentU==(0 1) IndirectU==(0 1) marginsplot , legend(subtitle("Predicted outcome and 95% confidence intervals")) title( Public job) recast(dot) graph save J1.gph Any help would be highly appreciated. Kind regards Flavia Fossati Plot predictions of multiple variables in one plot (logit model)
  • From: Richard Williams <[email protected]>
• Re: st: How do I identify whether an individual is related to another individual in my dataset?
  • From: Nick Cox <[email protected]>
• st: How do I identify whether an individual is related to another individual in my dataset?
  • From: Dimitri Silva <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Nick Bornschein <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Andrea Jaberg <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Nick Cox <[email protected]>
• Re: st: Regular expressions
  • From: Nick Cox <[email protected]>
• Re: st: cluster analysis: differences between clusters
  • From: Nick Cox <[email protected]>
• st: Regular expressions
  • From: Estrella Gomez <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Maarten Buis <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Nick Cox <[email protected]>
• st: cluster analysis: differences between clusters
  • From: Andrea Jaberg <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Nick Bornschein <[email protected]>
• RE: st: multicollinearity stcox
  • From: "DeMichele, Matthew" <[email protected]>
• Re: st: drop observations - if statement
  • From: Nick Cox <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Nick Cox <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Maarten Buis <[email protected]>
• Re: st: Create a flag (panel data)
  • From: Nick Cox <[email protected]>
• AW: st: Resampling and compare full sample with subsamples
  • From: Johannes Thrul <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Maarten Buis <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Nick Cox <[email protected]>
• Re: st: graph pie with variable label as title
  • From: Maarten Buis <[email protected]>
• AW: st: Resampling and compare full sample with subsamples
  • From: Johannes Thrul <[email protected]>
• Re: st: Plot predictions of multiple variables in one plot (logit model)
  • From: Maarten Buis <[email protected]>
• st: Plot predictions of multiple variables in one plot (logit model)
  • From: [email protected]
• st: Dear all, I am running a logit model with three dichotomous variables and other controls. I would like to plot the predictions of these three variables in one plot but I cannot figure out how to plot them so that they do not overlap in the graph. Is there a way to do this? xi:logit Dependent Jobless CurrentU IndirectU x1 x3 x5 i.x6 estimates store M1 margins , at(Jobless=(0 1) CurrentU==(0 1) IndirectU==(0 1) marginsplot , legend(subtitle("Predicted outcome and 95% confidence intervals")) title( Public job) recast(dot) graph save J1.gph Any help would be highly appreciated. Kind regards Flavia Fossati Plot predictions of multiple variables in one plot (logit model)
  • From: [email protected]
• st: graph pie with variable label as title
  • From: Nick Bornschein <[email protected]>
• Re: st: Create a flag (panel data)
  • From: Roberto Ferrer <[email protected]>
• RE: st: STATA won't read command
  • From: "Mason, Patrick" <[email protected]>
• Re: st: multicollinearity stcox
  • From: Steve Samuels <[email protected]>
• Re: st: drop observations - if statement
  • From: R Zhang <[email protected]>
• Re: st: STATA won't read command
  • From: Richard Williams <[email protected]>
• Re: st: Fwd: -cmp- not concave
  • From: "Z. Liu" <[email protected]>
• Re: st: Marginal effects after mvprobit
  • From: Steve Samuels <[email protected]>
• st: Create a flag (panel data)
  • From: R Zhang <[email protected]>
• Re: st: Fwd: -cmp- not concave
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: STATA won't read command
  • From: Sergiy Radyakin <[email protected]>
• st: STATA won't read command
  • From: "Mason, Patrick" <[email protected]>
• st: Fwd: -cmp- not concave
  • From: "Z. Liu" <[email protected]>
• Re: st: Re: ANOVA
  • From: Wendy Alfaro <[email protected]>
• st: Re: ANOVA
  • From: "Joseph Coveney" <[email protected]>
• st: Testing for Serial Correlation in Panel Data (while using time lags)
  • From: Christopher Parker <[email protected]>
• Re: st: Marginal effects after mvprobit
  • From: Steve Samuels <[email protected]>
• st: Generating days eligible when eligibility changes over time
  • From: "Brill, Robert" <[email protected]>
• RE: st: RE: Stata treatment of sort order
  • From: Kieran McCaul <[email protected]>
• RE: st: RE: Stata treatment of sort order
  • From: "Sarah Edgington" <[email protected]>
• Re: st: drop observations - if statement
  • From: Roberto Ferrer <[email protected]>
• Re: st: ANOVA
  • From: Wendy Alfaro <[email protected]>
• Re: st: ANOVA
  • From: Roberto Ferrer <[email protected]>
• RE: st: RE: Stata treatment of sort order
  • From: Andrew Maurer <[email protected]>
• st: multicollinearity stcox
  • From: "DeMichele, Matthew" <[email protected]>
• Re: st: RE: Stata treatment of sort order
  • From: Richard Goldstein <[email protected]>
• st: ANOVA
  • From: Wendy Alfaro <[email protected]>
• st: RE: Stata treatment of sort order
  • From: "Sarah Edgington" <[email protected]>
• Re: st: drop observations - if statement
  • From: R Zhang <[email protected]>
• Re: st: Stata treatment of sort order
  • From: Nick Cox <[email protected]>
• st: Stata treatment of sort order
  • From: Andrew Maurer <[email protected]>
• Re: st: loop to create varialbes
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Jeph Herrin <[email protected]>
• Re: st: loop to create varialbes
  • From: Nick Cox <[email protected]>
• Re: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Jeph Herrin <[email protected]>
• Re: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Nick Cox <[email protected]>
• RE: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: "Radwin, David" <[email protected]>
• RE: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Andrew Maurer <[email protected]>
• Re: st: loop to create varialbes
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Cody Cook <[email protected]>
• st: loop to create varialbes
  • From: "Snapp, Kevin Michael" <[email protected]>
• Re: st: Robust Regression
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: Efficiently using associative arrays in mata
  • From: Andrew Maurer <[email protected]>
• st: RE: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Andrew Maurer <[email protected]>
• Re: st: Efficiently using associative arrays in mata
  • From: Aljar Meesters <[email protected]>
• st: Dropping parts of strings (i.e. Baldwin County becomes Baldwin)
  • From: Cody Cook <[email protected]>
• Re: st: How to fix 2 errors in Notepad++ syntax highlighting?
  • From: Bert Lloyd <[email protected]>
• Re: st: set max_memory from command line
  • From: "William Gould, StataCorp LP" <[email protected]>
• Re: st: set max_memory from command line
  • From: Jasper Haller <[email protected]>
• Re: st: Robust Regression
  • From: Nick Cox <[email protected]>
• st: lfit 2 lines with different slopes but same intercept in cmogram?
  • From: Jen Zhen <[email protected]>
• st: Robust Regression
  • From: Robert Davidson <[email protected]>
• Re: st: drop observations - if statement
  • From: Nick Cox <[email protected]>
• Re: st: set max_memory from command line
  • From: "William Gould, StataCorp LP" <[email protected]>
• Re: st: drop observations - if statement
  • From: R Zhang <[email protected]>
• Re: st: Looping through several hundred regressions and performing deseasonalising
  • From: Nick Cox <[email protected]>
• Re: st: drop observations - if statement
  • From: Nick Cox <[email protected]>
• st: Looping through several hundred regressions and performing deseasonalising
  • From: Micha Schildmann <[email protected]>
• Re: st: drop observations - if statement
  • From: R Zhang <[email protected]>
• st: Coskewness and Cokurtosis
  • From: [email protected]
• st: set max_memory from command line
  • From: Jasper Haller <[email protected]>
• Re: st: drop observations - if statement
  • From: Nick Cox <[email protected]>
• Re: st: drop observations - if statement
  • From: Nick Cox <[email protected]>
• Re: st: Efficiently using associative arrays in mata
  • From: Aljar Meesters <[email protected]>
• st: Marginal effects after mvprobit
  • From: Elin Vimefall <[email protected]>
• Re: st: Problems using dta files
  • From: "Alberto Iniguez" <[email protected]>
• Re: st: drop observations - if statement
  • From: R Zhang <[email protected]>
• Re: st: RE: drop observations - if statement
  • From: R Zhang <[email protected]>
• Re: st: RE: drop observations - if statement
  • From: Nick Cox <[email protected]>
• st: Leading and lagging
  • From: Sebastian Say <[email protected]>
• st: RE: drop observations - if statement
  • From: Kieran McCaul <[email protected]>
• st: xtabond2-should we keep or drop the missing observations?
  • From: ATANASOVSKA Viktorija <[email protected]>
• Re: st: linear prediction, xb, after xtcloglog assuming that the random effect is zero
  • From: Steve Samuels <[email protected]>
• st: Instrumentation strategy for interaction between endogenous and exogenous variables using ivreg2
  • From: sudha mani <[email protected]>
• Re: st: RE: drop observations - if statement
  • From: Richard Williams <[email protected]>
• Re: st: linear prediction, xb, after xtcloglog assuming that the random effect is zero
  • From: Steve Samuels <[email protected]>
• Re: st: linear prediction, xb, after xtcloglog assuming that the random effect is zero
  • From: Steve Samuels <[email protected]>
• Re: st: drop observations - if statement
  • From: Jeph Herrin <[email protected]>
• st: RE: drop observations - if statement
  • From: Andrew Maurer <[email protected]>
• st: drop observations - if statement
  • From: R Zhang <[email protected]>
• st: linear prediction, xb, after xtcloglog assuming that the random effect is zero
  • From: Melaku Fekadu <[email protected]>
• Re: st: nlsur for mixed demand model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Dynamic quadratic almost ideal demand system
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Splitting string by parse option
  • From: Sebastian Say <[email protected]>
• Re: st: Goodness of Fit Measure for Generalized Linear Models with Adjustment for the Number of Parameters
  • From: Nick Cox <[email protected]>
• Re: st: Graphics - normal density line
  • From: "Antonio F. Boing" <[email protected]>
• Re: st: marginstyle not working in scheme file
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Splitting string by parse option
  • From: Nick Cox <[email protected]>
• RE: st: Efficiently using associative arrays in mata
  • From: Joe Canner <[email protected]>
• RE: st: Efficiently using associative arrays in mata
  • From: Andrew Maurer <[email protected]>
• Re: st: Splitting string by parse option
  • From: Sebastian Say <[email protected]>
• Re: st: marginstyle not working in scheme file
  • From: Alex Gamma <[email protected]>
• st: esttab or estout table format
  • From: Nina Brooks <[email protected]>
• Re: st: Efficiently using associative arrays in mata
  • From: Aljar Meesters <[email protected]>
• Re: st: marginstyle not working in scheme file
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Two bugs with -usespss-
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Splitting string by parse option
  • From: Nick Cox <[email protected]>
• st: Splitting string by parse option
  • From: Sebastian Say <[email protected]>
• Re: st: nlsur for mixed demand model
  • From: Nigussie Tefera <[email protected]>
• Re: st: nlsur for mixed demand model
  • From: Nigussie Tefera <[email protected]>
• Re: st: Graphics - normal density line
  • From: Joerg Luedicke <[email protected]>
• Re: st: Graphics - normal density line
  • From: Colin Rehm <[email protected]>
• st: Graphics - normal density line
  • From: "Antonio F. Boing" <[email protected]>
• st: marginstyle not working in scheme file
  • From: Alex Gamma <[email protected]>
• st: Efficiently using associative arrays in mata
  • From: Andrew Maurer <[email protected]>
• RE: st: Pstest and Sensatt
  • From: "Radwin, David" <[email protected]>
• Re: st: Plotting baseline hazard function with stcrreg
  • From: Steve Samuels <[email protected]>
• st: RE: kappa command and kapci program
  • From: Garry Anderson <[email protected]>
• Re: st: Two bugs with -usespss-
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Two bugs with -usespss-
  • From: Carlos Avellaneda Suárez <[email protected]>
• Re: st: Two bugs with -usespss-
  • From: Sergiy Radyakin <[email protected]>
• st: nlsur for mixed demand model
  • From: Racha Ramadan <[email protected]>
• RE: st: combination of k elements each being 0 or 1
  • From: "Impavido, Gregorio" <[email protected]>
• st: Matching rows of the matrix with corresponding observations
  • From: Eilya Torshizian <[email protected]>
• Re: st: Resampling and compare full sample with subsamples
  • From: Steve Samuels <[email protected]>
• Re: st: error message Stata13 - file corrupt
  • From: Sergiy Radyakin <[email protected]>
• Re: st: combine foreach and if
  • From: Nick Cox <[email protected]>
• Re: st: combine foreach and if
  • From: Vincent Koppelmans <[email protected]>
• Re: st: combine foreach and if
  • From: Nick Cox <[email protected]>
• st: combine foreach and if
  • From: Vincent Koppelmans <[email protected]>
• st: kappa command and kapci program
  • From: Jen Krenz <[email protected]>
• Re: st: combination of k elements each being 0 or 1
  • From: Robert Picard <[email protected]>
• Re: st: combination of k elements each being 0 or 1
  • From: Fernando Rios Avila <[email protected]>
• Re: st: combination of k elements each being 0 or 1
  • From: Nick Cox <[email protected]>
• Re: st: combination of k elements each being 0 or 1
  • From: Fernando Rios Avila <[email protected]>
• st: RE: Oaxaca decomposition
  • From: "Rubil Ivica" <[email protected]>
• st: combination of k elements each being 0 or 1
  • From: "Impavido, Gregorio" <[email protected]>
• Re: st: Adding error bars to bar chart
  • From: Nick Cox <[email protected]>
• st: Oaxaca decomposition
  • From: Vaidyanathan Ganapathy <[email protected]>
• st: Goodness of Fit Measure for Generalized Linear Models with Adjustment for the Number of Parameters
  • From: Roberto Liebscher <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Adding error bars to bar chart
  • From: Chris Yang <[email protected]>
• Re: st: Pstest and Sensatt
  • From: Isobel Williams <[email protected]>
• Re: st: Pstest and Sensatt
  • From: Isobel Williams <[email protected]>
• Re: st: Graphics (and numerics) for univariate distributions
  • From: Nick Cox <[email protected]>
• Re: st: teffects, caliper, propensity score matching
  • From: "David M. Drukker" <[email protected]>
• Re: st: Graphics (and numerics) for univariate distributions
  • From: Janet Hill <[email protected]>
• Re: st: Adding error bars to bar chart
  • From: Nick Cox <[email protected]>
• Re: st: Graphics (and numerics) for univariate distributions
  • From: Nick Cox <[email protected]>
• Re: st: Adding error bars to bar chart
  • From: "Roger B. Newson" <[email protected]>
• st: Adding error bars to bar chart
  • From: Chris Yang <[email protected]>
• Re: st: error message Stata13 - file corrupt
  • From: Nick Cox <[email protected]>
• st: Graphics (and numerics) for univariate distributions
  • From: Janet Hill <[email protected]>
• st: Rare Events Regression
  • From: Robert Davidson <[email protected]>
• st: error message Stata13 - file corrupt
  • From: "Ejebu, Ourega-Zoe" <[email protected]>
• st: Plotting baseline hazard function with stcrreg
  • From: ROXANNE BEAUCLAIR <[email protected]>
• Re: st: Pstest and Sensatt
  • From: Fernando Rios Avila <[email protected]>
• st: Groupwise regressions and ranking
  • From: Micha Schildmann <[email protected]>
• AW: st: AW: System GMM with xtabond2
  • From: "Dithmer, Jan" <[email protected]>
• st: Error code r504 when there is no missing data
  • From: Ricky Lim <[email protected]>
• Re: st: AW: System GMM with xtabond2
  • From: Florian Schwab <[email protected]>
• Re: st: Sum of specific observations of the same variable
  • From: Nick Cox <[email protected]>
• st: Two bugs with -usespss-
  • From: Timothy Mak <[email protected]>
• st: Pstest and Sensatt
  • From: Isobel Williams <[email protected]>
• st: AW: System GMM with xtabond2
  • From: "Dithmer, Jan" <[email protected]>
• Re: st: Governance Index
  • From: Maarten Buis <[email protected]>
• st: Sum of specific observations of the same variable
  • From: Andreas Dimopoulos <[email protected]>
• -charlist- update available from SSC [was: Re: st: charlist syntax error]
  • From: Nick Cox <[email protected]>
• Re: st: New version of -rsource- on SSC
  • From: "Roger B. Newson" <[email protected]>
• Re: st: New version of -rsource- on SSC
  • From: "David C. Airey" <[email protected]>
• Re: st: New version of -rsource- on SSC
  • From: "Roger B. Newson" <[email protected]>
• re: st: New version of -rsource- on SSC
  • From: "David C. Airey" <[email protected]>
• st: Goodness of Fit Statistics using -gsem- in Stata 13.1 SE
  • From: "Christopher P. Salas-Wright" <[email protected]>
• st: System GMM with xtabond2
  • From: Florian Schwab <[email protected]>
• st: Resampling and compare full sample with subsamples
  • From: Johannes Thrul <[email protected]>
• Re: st: Governance Index
  • From: Muhammad Ramzan <[email protected]>
• st: New package -tfinsert- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: New version of -rsource- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: margins with 4-way interaction
  • From: Theocharis Kromydas <[email protected]>
• st: New program -mimrgns- available from SSC
  • From: daniel klein <[email protected]>
• st: New program -mimrgns- available from SSC
  • From: daniel klein <[email protected]>
• Re: st: Governance Index
  • From: Maarten Buis <[email protected]>
• Re: st: Problems using dta files
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Problems using dta files
  • From: Richard Williams <[email protected]>
• Re: st: Problems using dta files
  • From: Richard Williams <[email protected]>
• st: -twoway- option for reversing plot order
  • From: Timothy Mak <[email protected]>
• st: From: "Md. Alauddin Majumder" <[email protected]>
  • From: [email protected]
• Re: st: Interpreting streg, time dist(weibull) coefficients as a time metric
  • From: Steve Samuels <[email protected]>
• st: Problems using dta files
  • From: "Alberto Iniguez" <[email protected]>
• Re: st: Regression and Looping
  • From: Nick Cox <[email protected]>
• Re: st: Error 3499 using synth ("emptymat() not found")
  • From: Chris Hajzler <[email protected]>
• Re: st: Regression and Looping
  • From: Reese Andorfer <[email protected]>
• Re: st: stripplot not stacking correctly
  • From: Nick Cox <[email protected]>
• Re: st: stripplot not stacking correctly
  • From: Nick Cox <[email protected]>
• Re: st: Regression and Looping
  • From: Nick Cox <[email protected]>
• st: stripplot not stacking correctly
  • From: Cody Cook <[email protected]>
• Re: st: Error 3499 using synth ("emptymat() not found")
  • From: Nick Cox <[email protected]>
• st: Regression and Looping
  • From: Reese Andorfer <[email protected]>
• st: Error 3499 using synth ("emptymat() not found")
  • From: Chris Hajzler <[email protected]>
• Re: st: Collapsing 44 variables to give out mean and sd for every varisble
  • From: Martyn Sherriff <[email protected]>
• st: constraints on number of observations in nbreg not working
  • From: "Cale, Grace E" <[email protected]>
• Re: st: Collapsing 44 variables to give out mean and sd for every varisble
  • From: Jeph Herrin <[email protected]>
• st: Collapsing 44 variables to give out mean and sd for every varisble
  • From: lars Folkestad <[email protected]>
• st: Governance Index
  • From: Muhammad Ramzan <[email protected]>
• st: quasi experimental design inquiry
  • From: Omar Okasha <[email protected]>
• Re: st: Interpreting streg, time dist(weibull) coefficients as a time metric
  • From: Yvon Pho <[email protected]>
• st: Question about xtlogit and temporal dummy variables
  • From: <[email protected]>
• Re: st: creating combinations of all 49 variables and counting their frequencies
  • From: Nick Cox <[email protected]>
• st: Pstest
  • From: Isobel Williams <[email protected]>
• Re: st: creating combinations of all 49 variables and counting their frequencies
  • From: Nick Cox <[email protected]>
• Re: st: creating combinations of all 49 variables and counting their frequencies
  • From: Jacob Model <[email protected]>
• Re: st: creating combinations of all 49 variables and counting their frequencies
  • From: Jacob Model <[email protected]>
• st: creating combinations of all 49 variables and counting their frequencies
  • From: Krisha Lim <[email protected]>
• Re: st: Synthetic panel
  • From: Austin Nichols <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Steve Samuels <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Steve Samuels <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Steve Samuels <[email protected]>
• st: Synthetic panel
  • From: Zuhumnan Dapel <[email protected]>
• st: Interactions between endogenous and exogenous variables using ivreg2
  • From: sudha mani <[email protected]>
• Re: st: Interpreting streg, time dist(weibull) coefficients as a time metric
  • From: Steve Samuels <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Jacob Model <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Jacob Model <[email protected]>
• Re: st: bootstrap problem on a user written program: insufficient observations to compute bootstrap standard errors
  • From: Marco Savegnago <[email protected]>
• st: Question about xtlogit and temporal dummy variables
  • From: <[email protected]>
• Re: st: bootstrap problem on a user written program: insufficient observations to compute bootstrap standard errors
  • From: Federico Belotti <[email protected]>
• RE: st: Losing Observations in Logit
  • From: Isobel Williams <[email protected]>
• Re: st: About taking log on zero values
  • From: Austin Nichols <[email protected]>
• Re: st: Losing Observations in Logit
  • From: Fernando Rios Avila <[email protected]>
• RE: st: Losing Observations in Logit
  • From: Isobel Williams <[email protected]>
• Re: st: Losing Observations in Logit
  • From: Fernando Rios Avila <[email protected]>
• st: Losing Observations in Logit
  • From: Isobel Williams <[email protected]>
• Re: st: Calculating standard deviations used to approximate beta distributions
  • From: Austin Nichols <[email protected]>
• Re: st: Question about xtlogit and temporal dummy variables
  • From: Austin Nichols <[email protected]>
• st: bootstrap problem on a user written program: insufficient observations to compute bootstrap standard errors
  • From: Marco Savegnago <[email protected]>