Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• st: Overidentifying restrictions tests and fixed effect constant in xtabond2
  • From: Vivian Chen <[email protected]>
• Re: st: FW: Model SS/R-square in nl
  • From: Steven Samuels <[email protected]>
• Re: st: Stata 11 crashing
  • From: Daniel Marcelino <[email protected]>
• st: Difference-in-Hansen
  • From: wangpan110 <[email protected]>
• Re: st: In search of the lost precision
  • From: Gary Longton <[email protected]>
• Re: st: FW: Model SS/R-square in nl
  • From: Steven Samuels <[email protected]>
• RE: st: FW: Model SS/R-square in nl
  • From: "CJ Lan" <[email protected]>
• Re: st: In search of the lost precision
  • From: Farshad Pourmalek <[email protected]>
• Re: st: FW: Model SS/R-square in nl
  • From: Nick Cox <[email protected]>
• Re: st: In search of the lost precision
  • From: Farshad Pourmalek <[email protected]>
• Re: st: Finding the Most Common Combinations
  • From: Nick Cox <[email protected]>
• Re: st: In search of the lost precision
  • From: Austin Nichols <[email protected]>
• st: In search of the lost precision
  • From: Farshad Pourmalek <[email protected]>
• Re: st: Efficient way to create adjacency matrix in Mata
  • From: "Lacy,Michael" <[email protected]>
• Re: st: Stata 11 crashing
  • From: Austin Nichols <[email protected]>
• Re: st: Nostalgia for old example - bring back the bacon
  • From: Austin Nichols <[email protected]>
• st: How to correct for autocorrealation in system of equations
  • From: ABDUL ADAM <[email protected]>
• st: AW: Finding the Most Common Combinations
  • From: "Kaulisch, Marc" <[email protected]>
• st: FW: Model SS/R-square in nl
  • From: "CJ Lan" <[email protected]>
• RE: st: linear mixed models doubt in how to interpret the Coef
  • From: "Michael Ghebre" <[email protected]>
• st: Finding the Most Common Combinations
  • From: Zach Levin <[email protected]>
• Re: st: linear mixed models doubt in how to interpret the Coef
  • From: Maarten Buis <[email protected]>
• st: Two same dataset but results says problem of collinearity
  • From: vikramfinavker <[email protected]>
• st: Nostalgia for old example - bring back the bacon
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: linear mixed models doubt in how to interpret the Coef
  • From: Luisa Soares-Miranda <[email protected]>
• RE: st: linear mixed models doubt in how to interpret the Coef
  • From: "Michael Ghebre" <[email protected]>
• Re: st: linear mixed models doubt in how to interpret the Coef
  • From: Joerg Luedicke <[email protected]>
• Re: st: linear mixed models doubt in how to interpret the Coef
  • From: Luisa Soares-Miranda <[email protected]>
• Re: st: linear mixed models doubt in how to interpret the Coef
  • From: Maarten Buis <[email protected]>
• RE: st: RE: xtabond2--number of instruments.
  • From: DE SOUZA Eric <[email protected]>
• st: linear mixed models doubt in how to interpret the Coef
  • From: Luisa Soares-Miranda <[email protected]>
• Re: st: Stata 11 crashing
  • From: Richard Palmer-Jones <[email protected]>
• Re: st: Stata 11 crashing
  • From: Richard Goldstein <[email protected]>
• st: Stata 11 crashing
  • From: Richard Palmer-Jones <[email protected]>
• Re: st: Missing F value in regression output.
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Output problem attnd , attr, atts
  • From: "Jason Zarmulski" <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Ridhima Gupta <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Maarten Buis <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Ridhima Gupta <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Maarten Buis <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Ridhima Gupta <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Maarten Buis <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Ridhima Gupta <[email protected]>
• Re: st: Efficient way to create adjacency matrix in Mata
  • From: Maarten Buis <[email protected]>
• Re: st: too many macros
  • From: Nick Cox <[email protected]>
• Re: st: too many macros
  • From: Keith Dear <[email protected]>
• Re: st: large eps files created from stata graphs [SEC=UNCLASSIFIED]
  • From: Jennifer Baxter <[email protected]>
• st: too many macros
  • From: "ali hashemi" <[email protected]>
• Re: st: Predicted probability after xtlogit with i option
  • From: Urmi Bhattacharya <[email protected]>
• Re: st: SUREG for Almost Ideal Demand System
  • From: "Brian P. Poi" <[email protected]>
• Re: st: constrained linear least-squares problems without using ML
  • From: Steven Samuels <[email protected]>
• Re: st: constrained linear least-squares problems without using ML
  • From: Steven Samuels <[email protected]>
• st: large eps files created from stata graphs
  • From: Jennifer Baxter <[email protected]>
• st: Efficient way to create adjacency matrix in Mata
  • From: Benjamin Allaire <[email protected]>
• RE: st: Missing F value in regression output.
  • From: "Gupta, Sumedha" <[email protected]>
• Re: st: Analysis of experiment involving baseline measurements
  • From: Ángel Rodríguez Laso <[email protected]>
• Re: st: marginal effect of the interaction term in the probit model using margins command
  • From: Maarten Buis <[email protected]>
• Re: st: Extracting coefficients from xtmixed model
  • From: Maarten Buis <[email protected]>
• Re: st: Missing F value in regression output.
  • From: Nick Cox <[email protected]>
• Re: st: Query on xtrans
  • From: Austin Nichols <[email protected]>
• st: Query on xtrans
  • From: Daphne NICOLITSAS <[email protected]>
• st: Missing F value in regression output.
  • From: "Gupta, Sumedha" <[email protected]>
• Re: st: xtcsd error
  • From: Sami Alameen <[email protected]>
• Re: st: xtcsd error
  • From: Sami Alameen <[email protected]>
• st: Extracting coefficients from xtmixed model
  • From: Debs Majumdar <[email protected]>
• Re: st: RE: Re: rolling standard deviation [was: ""]
  • From: Austin Nichols <[email protected]>
• Re: st: Predicted probability after xtlogit with i option
  • From: Joerg Luedicke <[email protected]>
• st: Thread-Index: Acw2hSNoKEe+GALWTv+Qdt/CONjYXg==
  • From: "Gupta, Sumedha" <[email protected]>
• Re: st: RE: xtabond2--number of instruments.
  • From: Steven Archambault <[email protected]>
• st: Predicted probability after xtlogit with i option
  • From: Urmi Bhattacharya <[email protected]>
• st: xtcsd error
  • From: May Ster <[email protected]>
• st: stack cumulative incidence curves
  • From: marcel marcel <[email protected]>
• Re: st: three-level xtreg
  • From: Stas Kolenikov <[email protected]>
• st: three-level xtreg
  • From: Lisa Marie Yarnell <[email protected]>
• st: marginal effect of the interaction term in the probit model using margins command
  • From: Ridhima Gupta <[email protected]>
• RE: st: RE: RE: find xi3 ado file
  • From: "Cans, Christine" <[email protected]>
• Re: st: Re: Two part model vs Tobit vs Heckman
  • From: Jeffrey Wooldridge <[email protected]>
• Re: st: RE: Problem with "real" command
  • From: Jérôme Fauconnier <[email protected]>
• Re: st: Analysis of experiment involving baseline measurements
  • From: "Clyde Schechter" <[email protected]>
• st: mixed models doubt in how to interpret the Coef
  • From: Luisa Soares-Miranda <[email protected]>
• st: RE: Problem with "real" command
  • From: Nick Cox <[email protected]>
• st: RE: Re: rolling standard deviation [was: ""]
  • From: Nick Cox <[email protected]>
• st: Problem with "real" command
  • From: Jérôme Fauconnier <[email protected]>
• st: Re: rolling standard deviation [was: ""]
  • From: Maarten Buis <[email protected]>
• st: Re:
  • From: Muhammad Anees <[email protected]>
• [no subject]
  • From: [email protected]
• Re: st: Question about fitstat for R2
  • From: Richard Williams <[email protected]>
• Re: st: summarize, store multiple means?
  • From: Joerg Luedicke <[email protected]>
• st: Re: Two part model vs Tobit vs Heckman
  • From: Maarten Buis <[email protected]>
• Re: st: constrained linear least-squares problems without using ML
  • From: Maarten Buis <[email protected]>
• Re: st: RE: RE: find xi3 ado file
  • From: Maarten Buis <[email protected]>
• Re: st: summarize, store multiple means?
  • From: Nick Cox <[email protected]>
• st: summarize, store multiple means?
  • From: D-Ta <[email protected]>
• Re: st: xtline and addplot option
  • From: Maarten Buis <[email protected]>
• st: SUREG for Almost Ideal Demand System
  • From: Michael Musyoka <[email protected]>
• st: RE: RE: find xi3 ado file
  • From: "Cans, Christine" <[email protected]>
• Re: st: xtline and addplot option
  • From: Nick Cox <[email protected]>
• st: Question about fitstat for R2
  • From: Yang Jue <[email protected]>
• Re: st: Stata 12 Announcement
  • From: "Joseph Coveney" <[email protected]>
• st: constrained linear least-squares problems without using ML
  • From: "ali hashemi" <[email protected]>
• st: Changing font style in a scheme
  • From: Francisco Rowe <[email protected]>
• Re: st: sample selection (-sample) in stata
  • From: Joerg Luedicke <[email protected]>
• st: sample selection (-sample) in stata
  • From: Shikha Sinha <[email protected]>
• st: xtline and addplot option
  • From: Lindsay Pettingill <[email protected]>
• st: RE: Output problem attnd , attr, atts
  • From: Jan Bryla <[email protected]>
• st: RE: stability test for Error Correction Models and forecast on stata
  • From: Jan Bryla <[email protected]>
• st: RE: find xi3 ado file
  • From: "Pieter-Jan" <[email protected]>
• RE: st: Stata 12 Announcement
  • From: "Lachenbruch, Peter" <[email protected]>
• st: find xi3 ado file
  • From: "Cans, Christine" <[email protected]>
• Re: st: bootstrapping different models using the same samples
  • From: Maarten Buis <[email protected]>
• Re: st: Overlapping averages
  • From: Austin Nichols <[email protected]>
• st: bootstrapping different models using the same samples
  • From: "Steve Martin" <[email protected]>
• st: KPSS optimal lag length
  • From: Barbara Engels <[email protected]>
• st: RE: Overlapping averages
  • From: "Mak, Timothy" <[email protected]>
• st: xtivreg2
  • From: Humaira Asad <[email protected]>
• Re: st: Interpreting results from heckprob
  • From: "Garrido, Melissa" <[email protected]>
• st: RE: xtabond2--number of instruments.
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Summarizing properties of other group members meeting specified conditions
  • From: Nick Cox <[email protected]>
• RE: st: Summarizing properties of other group members meeting specified conditions
  • From: Erik Aadland <[email protected]>
• RE: st: Summarizing properties of other group members meeting specified conditions
  • From: Erik Aadland <[email protected]>
• Re: st: Summarizing properties of other group members meeting specified conditions
  • From: Nick Cox <[email protected]>
• RE: st: Summarizing properties of other group members meeting specified conditions
  • From: Erik Aadland <[email protected]>
• Re: st: clogit:determining number of observations for each level of a categorical variable
  • From: Daniel Herbert Opi <[email protected]>
• st: Analysis of experiment involving baseline measurements
  • From: Philip Jones <[email protected]>
• st: Output problem attnd , attr, atts
  • From: "Jason Zarmulski" <[email protected]>
• Re: st: A problem while dealing with massive amount of data
  • From: Nick Cox <[email protected]>
• Re: st: A problem while dealing with massive amount of data
  • From: Neil Shephard <[email protected]>
• st: RE: RE: Case control study
  • From: "Cornelius Nattey" <[email protected]>
• Re: st: A problem while dealing with massive amount of data
  • From: Nick Cox <[email protected]>
• st: A problem while dealing with massive amount of data
  • From: Mayank Mishra <[email protected]>
• st: RE: xtabond2--number of instruments.
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Summarizing properties of other group members meeting specified conditions
  • From: Nick Cox <[email protected]>
• st: stability test for Error Correction Models and forecast on stata
  • From: Helene Kamgnia <[email protected]>
• Re: st: dynamic panel - bootstrapped Sargan and exclusion tests
  • From: Bernardo Schettini <[email protected]>
• st: Overlapping averages
  • From: Matthew Bombyk <[email protected]>
• st: UPDATE: wbopendata - Stata module to access World Bank databases
  • From: JP Azevedo <[email protected]>
• st: xtabond2--number of instruments.
  • From: Steven Archambault <[email protected]>
• re:st: Forecasting out of sample values for an autoregressive function....
  • From: Christopher Baum <[email protected]>
• st: RE: Case control study
  • From: "Visintainer, Paul" <[email protected]>
• Re: st: testing equality of coefficients across two ivregress models
  • From: Kanika Mahajan <[email protected]>
• re: st: Stata 12 Announcement
  • From: "Clyde Schechter" <[email protected]>
• st: Forecasting out of sample values for an autoregressive function....
  • From: John Ayers <[email protected]>
• st: RE: testing equality of coefficients across two ivregress models
  • From: "Schaffer, Mark E" <[email protected]>
• st: Reshape message - nn values will be changed
  • From: Gordon Hughes <[email protected]>
• Re: st: RE: Link for dropmiss.ado
  • From: Dorothy Bridges <[email protected]>
• RE: st: clogit:determining number of observations for each level of a categorical variable
  • From: Nick Cox <[email protected]>
• st: RE: Link for dropmiss.ado
  • From: Nick Cox <[email protected]>
• st: testing equality of coefficients across two ivregress models
  • From: Nidhiya Menon <[email protected]>
• Re: st: Case control study
  • From: Stas Kolenikov <[email protected]>
• st: RE: Nonlinear Panel in Parameters
  • From: "Lachenbruch, Peter" <[email protected]>
• st: Link for dropmiss.ado
  • From: Dorothy Bridges <[email protected]>
• Re: st: clogit:determining number of observations for each level of a categorical variable
  • From: Jacob Fowles <[email protected]>
• st: RE: Case control study
  • From: "Mak, Timothy" <[email protected]>
• RE: st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Humaira Asad <[email protected]>
• Re: st: mem usage and Stata version
  • From: Argyn Kuketayev <[email protected]>
• Re: st: matrix to local
  • From: Maarten Buis <[email protected]>
• Re: st: mem usage and Stata version
  • From: Alan Riley <[email protected]>
• Re: st: RE: Stata 12 Announcement
  • From: "William Gould, StataCorp LP" <[email protected]>
• RE: st: Summarizing properties of other group members meeting specified conditions
  • From: Erik Aadland <[email protected]>
• st: xtabond2 twostep drops variables
  • From: Gülsün Akın <[email protected]>
• Re: st: problems with "set statatmp"
  • From: Alan Riley <[email protected]>
• Re: st: matrix to local
  • From: Thomas <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: "Narahari H.S." <[email protected]>
• Re: st: Summarizing properties of other group members meeting specified conditions
  • From: Nick Cox <[email protected]>
• st: clogit:determining number of observations for each level of a categorical variable
  • From: Daniel Herbert Opi <[email protected]>
• Re: st: nonlinear equation: finding zeros
  • From: Austin Nichols <[email protected]>
• st: Summarizing properties of other group members meeting specified conditions
  • From: Erik Aadland <[email protected]>
• Re: st: matrix to local
  • From: Thomas <[email protected]>
• Re: st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Christopher Baum <[email protected]>
• Re: st: matrix to local
  • From: Nick Cox <[email protected]>
• st: matrix to local
  • From: Thomas <[email protected]>
• st: Case control study
  • From: "Cornelius Nattey" <[email protected]>
• st: Interpreting results from heckprob
  • From: "Florian Seliger" <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: Maarten Buis <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: Maarten Buis <[email protected]>
• Re: st: Stata 12 Announcement
  • From: Roger Newson <[email protected]>
• Re: st: Stata 12 Announcement
  • From: Antoine Terracol <[email protected]>
• Re: st: problems with "set statatmp"
  • From: Nick Cox <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: Nick Cox <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: "Narahari H.S." <[email protected]>
• st: problems with "set statatmp"
  • From: "Hannelore De Grande" <[email protected]>
• Re: st: Min value of a variable and an error in for loop
  • From: Nick Cox <[email protected]>
• RE: <SPAM>st: Stata 12 Announcement
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Apostrophe in labels breaks graph
  • From: Friedrich Huebler <[email protected]>
• st: CPU Usage around 5% with Stata/MP: how to increase the cpu load and make it faster?
  • From: ericf <[email protected]>
• re: st: Stata 12 Announcement
  • From: "Airey, David C" <[email protected]>
• Re: st: Stata 12 Announcement
  • From: "Data Analytics Corp." <[email protected]>
• Re: st: Stata 12 Announcement
  • From: David Souther <[email protected]>
• Re: st: Stata 12 Announcement
  • From: John Antonakis <[email protected]>
• Re: st: RE: Stata 12 Announcement
  • From: Richard Williams <[email protected]>
• st: RE: Stata 12 Announcement
  • From: "Dwamena, Ben" <[email protected]>
• st: Stata 12 Announcement
  • From: "William Gould, StataCorp LP" <[email protected]>
• RE: st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Humaira Asad <[email protected]>
• st: mem usage and Stata version
  • From: Will Hauser <[email protected]>
• Re: st: Nonlinear Panel in Parameters
  • From: Stas Kolenikov <[email protected]>
• Re: st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Christopher Baum <[email protected]>
• st: re:
  • From: Christopher Baum <[email protected]>
• Re: st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Muhammad Anees <[email protected]>
• st: Windmeijer's corrected se in xtivreg2 gmm2s
  • From: Humaira Asad <[email protected]>
• Re: st: Date: Sun, 26 Jun 2011 13:22:00 +0000
  • From: Muhammad Anees <[email protected]>
• RE: st: Date: Sun, 26 Jun 2011 13:22:00 +0000
  • From: Humaira Asad <[email protected]>
• RE: st: Date: Sun, 26 Jun 2011 13:22:00 +0000
  • From: Humaira Asad <[email protected]>
• Re: st: Nonlinear Panel in Parameters
  • From: hossein hosseini <[email protected]>
• st: Constraints in the MLE and delta method
  • From: Beatrice Crozza <[email protected]>
• st: Min value of a variable and an error in for loop
  • From: Mayank Mishra <[email protected]>
• Re: st: Nonlinear Panel in Parameters
  • From: Maarten Buis <[email protected]>
• Re: st: Getting all independent vars from a set of reg equations
  • From: Maarten Buis <[email protected]>
• Re: st: Date: Sun, 26 Jun 2011 13:22:00 +0000
  • From: Muhammad Anees <[email protected]>
• st: Date: Sun, 26 Jun 2011 13:22:00 +0000
  • From: Humaira Asad <[email protected]>
• st: Nonlinear Panel in Parameters
  • From: hossein hosseini <[email protected]>
• Re: st: fitting curves in regplot
  • From: Nick Cox <[email protected]>
• st: How to determine bandwidth in ivreg2?
  • From: ling jin <[email protected]>
• Re: st: Collapse - How does it collapse
  • From: Dawood Ashraf <[email protected]>
• Re: st: dynamic panel - bootstrapped Sargan and exclusion tests
  • From: Bernardo Schettini <[email protected]>
• Re: st: Apostrophe in labels breaks graph
  • From: Scott Merryman <[email protected]>
• Re: st: fitting curves in regplot
  • From: Arti Pandey <[email protected]>
• st: Apostrophe in labels breaks graph
  • From: Friedrich Huebler <[email protected]>
• re: re: Re: st: binary mediation command
  • From: "Ariel Linden. DrPH" <[email protected]>
• Re: st: Collapse - How does it collapse
  • From: Nick Cox <[email protected]>
• Re: st: fitting curves in regplot
  • From: Nick Cox <[email protected]>
• st: fitting curves in regplot
  • From: Arti Pandey <[email protected]>
• st: Nonlinear Panel in Parameters
  • From: hossein hosseini <[email protected]>
• st: Getting all independent vars from a set of reg equations
  • From: "Narahari H.S." <[email protected]>
• Re: st: Estimating a mixed logit model with mixlogit
  • From: Arne Risa Hole <[email protected]>
• Re: st: Collapse - How does it collapse
  • From: Dawood Ashraf <[email protected]>
• st: Collapse - How does it collapse
  • From: Dawood Ashraf <[email protected]>
• st: xtivreg2, fe: F-test in second stage is significant in first stage but insignificant in second stage
  • From: Humaira Asad <[email protected]>
• st: Twelve commandments
  • From: Nick Cox <[email protected]>
• Re: st: RE: saving -tabstatmat- output as matrix/data
  • From: Nick Cox <[email protected]>
• Re: st: Fwd: e(converge) for zip
  • From: Guillaume Daudin <[email protected]>
• Re: st: Insheet drops some part of long characters
  • From: Nick Cox <[email protected]>
• Re: st: Adding a text box on top of bars in bar graph
  • From: Nick Cox <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Nick Cox <[email protected]>
• Re: st: Use or don't use weights for combined cross-country observations in multi-level model
  • From: Clive Nicholas <[email protected]>
• st: Insheet drops some part of long characters
  • From: Mike Kim <[email protected]>
• st: Use or don't use weights for combined cross-country observations in multi-level model
  • From: Melanie Kolbe <[email protected]>
• Re: st: dynamic panel - bootstrapped Sargan and exclusion tests
  • From: Stas Kolenikov <[email protected]>
• Re: st: Stata 9 MP x64: install on Win 7 x64
  • From: Joy Wang <[email protected]>
• st: Adding a text box on top of bars in bar graph
  • From: ajjee <[email protected]>
• st: Estimating a mixed logit model with mixlogit
  • From: Tunga Kantarcı <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• st: dynamic panel - bootstrapped Sargan and exclusion tests
  • From: Bernardo Schettini <[email protected]>
• Re: st: saving -tabstatmat- output as matrix/data
  • From: Maarten Buis <[email protected]>
• st: RE: saving -tabstatmat- output as matrix/data
  • From: "Enayetur Raheem" <[email protected]>
• st: RE: saving -tabstatmat- output as matrix/data
  • From: Nick Cox <[email protected]>
• st: saving -tabstatmat- output as matrix/data
  • From: "Enayetur Raheem" <[email protected]>
• Re: st: RE: label the variables
  • From: Nick Cox <[email protected]>
• RE: st: RE: label the variables
  • From: "Miller, Daniel P" <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Joerg Luedicke <[email protected]>
• Re: st: RE: label the variables
  • From: Muhammad Anees <[email protected]>
• Re: st: label the variables
  • From: Muhammad Anees <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Maarten Buis <[email protected]>
• Re: st: Getting Output from Margins into Excel
  • From: Maarten Buis <[email protected]>
• st: Getting Output from Margins into Excel
  • From: savagem4 <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• Re: RE: st: RE: Ousout problem psmatch2
  • From: "Jason Zarmulski" <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Anders Alexandersson <[email protected]>
• st: RE: label the variables
  • From: Nick Cox <[email protected]>
• st: label the variables
  • From: Nahla Samargandi <[email protected]>
• st: RE: constant variable as IV in panel?
  • From: Gordon Hughes <[email protected]>
• Re: st: GLLAMM and rescaling sampling weights
  • From: Susanna Makela <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Maarten Buis <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• Re: st: Fwd: e(converge) for zip
  • From: Maarten Buis <[email protected]>
• st: Fwd: e(converge) for zip
  • From: Guillaume Daudin <[email protected]>
• st: RE: Lag Operator
  • From: Nick Cox <[email protected]>
• Re: st: syntax to get elements from posted matrices
  • From: Mirko <[email protected]>
• st: Lag Operator
  • From: Jibonayan Raychaudhuri <[email protected]>
• Re: st: syntax to get elements from posted matrices
  • From: Maarten Buis <[email protected]>
• st: syntax to get elements from posted matrices
  • From: Mirko <[email protected]>
• st: LR test and rho statistics in bioprobit
  • From: kyohey <[email protected]>
• Re: st: Test main effect (Beta) with significant interaction
  • From: Maarten Buis <[email protected]>
• Re: st: stata files in linux
  • From: Neil Shephard <[email protected]>
• re: re: Re: st: binary mediation command
  • From: Kristian Karlson <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Maarten Buis <[email protected]>
• st: Interval Regression and missing standard errors after using robust
  • From: Lina C <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Joerg Luedicke <[email protected]>
• st: Sending data to Stata using OLE Automation
  • From: "Florysiak, David" <[email protected]>
• RE: st: Cox regression proportion of variance explained
  • From: Elizabeth Kim Murphy <[email protected]>
• st: nonlinear equation: finding zeros
  • From: "Luigi Pinoni" <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Anders Alexandersson <[email protected]>
• st: Merge data from HDR2010 and WDR2011
  • From: Göran Lindgren <[email protected]>
• Re: st: ivreg2 and endogeneity
  • From: Michele Mancini <[email protected]>
• Re: st: ivreg2 and endogeneity
  • From: Austin Nichols <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• Re: st: Cox regression proportion of variance explained
  • From: Steven Samuels <[email protected]>
• st: ivreg2 and endogeneity
  • From: Michele Mancini <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Anders Alexandersson <[email protected]>
• Re: st: overidentification test after ivpois
  • From: Austin Nichols <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Joerg Luedicke <[email protected]>
• RE: st: deriving the variance-covariance matrix from point estimates and standard errors
  • From: "Monuteaux, Michael" <[email protected]>
• st: overidentification test after ivpois
  • From: Pierre-Louis Vézina <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• Re: st: Label the variables
  • From: Joerg Luedicke <[email protected]>
• Re: st: Label the variables
  • From: Nick Cox <[email protected]>
• RE: st: RE: looping up to a local macro
  • From: "Sarah Edgington" <[email protected]>
• Re: st: deriving the variance-covariance matrix from point estimates and standard errors
  • From: Austin Nichols <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Stas Kolenikov <[email protected]>
• st: Label the variables
  • From: Nahla Samargandi <[email protected]>
• RE: st: deriving the variance-covariance matrix from point estimates and standard errors
  • From: "Monuteaux, Michael" <[email protected]>
• RE: st: stata files in linux
  • From: amir gahremanpour <[email protected]>
• RE: st: RE: looping up to a local macro
  • From: Nick Cox <[email protected]>
• Re: st: deriving the variance-covariance matrix from point estimates and standard errors
  • From: Austin Nichols <[email protected]>
• Re: st: GLLAMM and rescaling sampling weights
  • From: Stas Kolenikov <[email protected]>
• st: Test main effect (Beta) with significant interaction
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: RE: looping up to a local macro
  • From: Michael Costello <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Stas Kolenikov <[email protected]>
• st: deriving the variance-covariance matrix from point estimates and standard errors
  • From: "Monuteaux, Michael" <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Joerg Luedicke <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Anders Alexandersson <[email protected]>
• Re: st: Cox regression proportion of variance explained
  • From: Steven Samuels <[email protected]>
• Re: st: RE: constant variable as IV in panel?
  • From: Matthias Opfinger <[email protected]>
• st: GLLAMM and rescaling sampling weights
  • From: Susanna Makela <[email protected]>
• Re: st: RE: constant variable as IV in panel?
  • From: Austin Nichols <[email protected]>
• RE: st: Complex Stata Code Examples
  • From: Nick Cox <[email protected]>
• Re: st: constant variable as IV in panel?
  • From: Austin Nichols <[email protected]>
• st: RE: writing quotes in a global variable
  • From: Nick Cox <[email protected]>
• Re: st: writing quotes in a global variable
  • From: Eric Booth <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Mayank Mishra <[email protected]>
• st: writing quotes in a global variable
  • From: "Martin Albers" <[email protected]>
• st: mg command
  • From: Nahla Samargandi <[email protected]>
• Re: st: save the output
  • From: Neil Shephard <[email protected]>
• Re: st: save the output
  • From: "William R. Buchanan" <[email protected]>
• Re: st: save the output
  • From: Matthias Opfinger <[email protected]>
• st: save the output
  • From: Nahla Samargandi <[email protected]>
• RE: st: RE: constant variable as IV in panel?
  • From: Nick Cox <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• RE: st: Accessing and using *.do file filename
  • From: "Seed, Paul" <[email protected]>
• Re: st: RE: constant variable as IV in panel?
  • From: Matthias Opfinger <[email protected]>
• st: RE: constant variable as IV in panel?
  • From: Nick Cox <[email protected]>
• st: constant variable as IV in panel?
  • From: Matthias Opfinger <[email protected]>
• Re: st: stata files in linux
  • From: Neil Shephard <[email protected]>
• Re: st: RE: looping up to a local macro
  • From: Nick Cox <[email protected]>
• Re: st: RE: looping up to a local macro
  • From: Nick Cox <[email protected]>
• st: stata files in linux
  • From: amir gahremanpour <[email protected]>
• st: Quaids and GMM
  • From: Ana <[email protected]>
• Re: st: RE: looping up to a local macro
  • From: Nick Cox <[email protected]>
• Re: st: RE: looping up to a local macro
  • From: Nick Cox <[email protected]>
• Re: st: reshaping long when the numeric part is in the middle of the string
  • From: Nick Cox <[email protected]>
• Re: st: looping up to a local macro
  • From: Eric Booth <[email protected]>
• Re: st: xtmixed with nonrtolerance. What happens?
  • From: Stas Kolenikov <[email protected]>
• st: Cox regression proportion of variance explained
  • From: Elizabeth Kim Murphy <[email protected]>
• st: RE: looping up to a local macro
  • From: "Sarah Edgington" <[email protected]>
• st: looping up to a local macro
  • From: Michael Costello <[email protected]>
• st: xtmixed with nonrtolerance. What happens?
  • From: "Lukas Bösch" <[email protected]>
• st: SSC Activity, May 2011
  • From: Christopher Baum <[email protected]>
• Re: st: reshaping long when the numeric part is in the middle of the string
  • From: "William R. Buchanan" <[email protected]>
• Re: st: reshaping long when the numeric part is in the middle of the string
  • From: Nick Cox <[email protected]>
• st: reshaping long when the numeric part is in the middle of the string
  • From: "Diogo L Pinheiro" <[email protected]>
• st: -svmat- error examples
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: error messages in -svmat-
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: Stata 9 MP x64: install on Win 7 x64
  • From: Koleman Strumpf <[email protected]>
• Re: st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• Re: st: Clustered robust standard errors in reg3
  • From: Kanika Mahajan <[email protected]>
• st: New version of -chardef- on SSC
  • From: Roger Newson <[email protected]>
• st: From: Page Liva <[email protected]>
  • From: [email protected]
• st: margins command after stcox to predict adjusted survival function
  • From: "Weichle, Thomas" <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Austin Nichols <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Joerg Luedicke <[email protected]>
• Re: st: Constraints in the MLE
  • From: Beatrice Crozza <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Maarten Buis <[email protected]>
• st: RE: Combine the observations of many variables under one variable
  • From: Nick Cox <[email protected]>
• Re: st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• st: Combine the observations of many variables under one variable
  • From: Nadine R <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Richard Goldstein <[email protected]>
• Re: st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Maarten Buis <[email protected]>
• Re: st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• Re: st: Constraints in the MLE
  • From: Maarten Buis <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Maarten Buis <[email protected]>
• st: Constraints in the MLE
  • From: Beatrice Crozza <[email protected]>
• Re: st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• Re: st: impute with draws from random distribution
  • From: Maarten Buis <[email protected]>
• st: test interaction effects after heckprob
  • From: Marco Sangiorgi <[email protected]>
• st: impute with draws from random distribution
  • From: D-Ta <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Nick Cox <[email protected]>
• Re: st: Clustered robust standard errors in reg3
  • From: John Antonakis <[email protected]>
• st: Complex Stata Code Examples
  • From: Mayank Mishra <[email protected]>
• st: Clustered robust standard errors in reg3
  • From: Kanika Mahajan <[email protected]>
• Re: st: mean group
  • From: Nick Cox <[email protected]>
• Re: st: Accessing and using *.do file filename
  • From: Eric Booth <[email protected]>
• st: Accessing and using *.do file filename
  • From: "Nancy Briggs" <[email protected]>
• Re: st: irr in ZINB command
  • From: Ari Samaranayaka <[email protected]>
• RE: st: First stage F stats - xtivreg
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: mean group
  • From: Nahla Samargandi <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• Re: st: calculate the length of all do-files in a folder, including subfolders
  • From: Eric Booth <[email protected]>
• Re: st: calculate the length of all do-files in a folder, including subfolders
  • From: Eric Booth <[email protected]>
• RE: st: mean group
  • From: Nahla Samargandi <[email protected]>
• RE: st: First stage F stats - xtivreg
  • From: "Schaffer, Mark E" <[email protected]>
• st: calculate the length of all do-files in a folder, including subfolders
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Question about felsdvregdm/felsdvreg
  • From: "O'Brien, Rachel H" <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• st: instrumental variable analysis in Cox model
  • From: Kyung Min Lee <[email protected]>
• Re: st: Fixed effects panel in presence of heteroscedasticity and autocorrelation
  • From: Natalie Trapp <[email protected]>
• Re: st: Fixed effects panel in presence of heteroscedasticity and autocorrelation
  • From: Volker Ludwig <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Stas Kolenikov <[email protected]>
• Re: st: iteration over all possible combinations of variables
  • From: Maarten Buis <[email protected]>
• st: Treatment type AND time on treatment against number of mutations
  • From: Glen Malherbe <[email protected]>
• st: New on SSC: -fmmlc- for postestimation w/ finite mixture models
  • From: Joerg Luedicke <[email protected]>
• st: Fixed effects panel in presence of heteroscedasticity and autocorrelation
  • From: Natalie Trapp <[email protected]>
• st: effects size in pooled ols, random and fixed effects models
  • From: Volker Ludwig <[email protected]>
• st: iteration over all possible combinations of variables
  • From: [email protected]
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Ridhima Gupta <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Maarten Buis <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Maarten Buis <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Ridhima Gupta <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• st: Estimating choice models at the individual level
  • From: "Data Analytics Corp." <[email protected]>
• Re: st: Complex Stata Code Examples
  • From: Richard Goldstein <[email protected]>
• st: ask about panel autocorrelated
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Ridhima Gupta <[email protected]>
• st: Complex Stata Code Examples
  • From: Mayank Mishra <[email protected]>
• Re: st: mean group
  • From: Markus Eberhardt <[email protected]>
• RE: st: mean group
  • From: Nahla Samargandi <[email protected]>
• Re: st: mean group
  • From: Markus Eberhardt <[email protected]>
• Re: st: How do I convert raw scores into percentiles?
  • From: Maarten Buis <[email protected]>
• RE: st: RE: Ousout problem psmatch2
  • From: Jan Bryla <[email protected]>
• st: How do I convert raw scores into percentiles?
  • From: Amy Hsin <[email protected]>
• st: stochastic frontier MLE command - new distribution of error terms
  • From: Konstantin Hahlbrock <[email protected]>
• st: RE: RE: Ousout problem psmatch2
  • From: Nick Cox <[email protected]>
• st: mean group
  • From: Nahla Samargandi <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Maarten Buis <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Ridhima Gupta <[email protected]>
• Re: st: RE: Ousout problem psmatch2
  • From: "Jason Zarmulski" <[email protected]>
• Re: st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Maarten Buis <[email protected]>
• st: encountering problem with esttab while attempting to get summary statistics into latex
  • From: Ridhima Gupta <[email protected]>
• Re: st: irr in ZINB command
  • From: Maarten Buis <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• st: irr in ZINB command
  • From: Ari Samaranayaka <[email protected]>
• st: Treatment type AND time on treatment against number of mutations
  • From: Glen Malherbe <[email protected]>
• st: panel autocorrelated
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: st: log normal and logistic hazard ratio
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: RE: RE: st: RE: Problem with xi and xtivreg2
  • From: Juan Pablo Cote Baron <[email protected]>
• Re: RE: RE: st: RE: Problem with xi and xtivreg2
  • From: Juan Pablo Cote Baron <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• Re: st: First stage F stats - xtivreg
  • From: Austin Nichols <[email protected]>
• st: Interpreting margins after zip
  • From: "McCollister, Kathryn E" <[email protected]>
• RE: RE: st: RE: Problem with xi and xtivreg2
  • From: DE SOUZA Eric <[email protected]>
• st: RE: Ousout problem psmatch2
  • From: Jan Bryla <[email protected]>
• RE: RE: st: RE: Problem with xi and xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: Programming question
  • From: "Mike Kim" <[email protected]>
• st: New version of -somersd- on SSC
  • From: Roger Newson <[email protected]>
• Re: RE: st: RE: Problem with xi and xtivreg2
  • From: Juan Pablo Cote Baron <[email protected]>
• Re: st: HHI
  • From: Austin Nichols <[email protected]>
• st: Re: dealing with high dimensional fixed effects
  • From: priyanka <[email protected]>
• st: New package -xglm- on SSC
  • From: Roger Newson <[email protected]>
• st: RE: HHI
  • From: Nick Cox <[email protected]>
• Re: st: Merge Panel Datasets
  • From: Phil Schumm <[email protected]>
• Re: st: spmat: banded matrix from friendship list
  • From: [email protected]
• st: HHI
  • From: Salima Bouayad Agha <[email protected]>
• st: Ousout problem psmatch2
  • From: Jason Zarmulski <[email protected]>
• st: SSC Updates
  • From: Christopher Baum <[email protected]>
• Re: st: problems with probit after multiple imputation with ice
  • From: Maarten Buis <[email protected]>
• AW: st: problems with probit after multiple imputation with ice
  • From: "Berger, Martin" <[email protected]>
• Re: st: problems with probit after multiple imputation with ice
  • From: Maarten Buis <[email protected]>
• st: problems with probit after multiple imputation with ice
  • From: "Berger, Martin" <[email protected]>
• Re: st: Replace text in a file and save it with Stata
  • From: Maarten Buis <[email protected]>
• st: Principal Dynamic Modes
  • From: [email protected]
• st: Replace text in a file and save it with Stata
  • From: "Renger van Nieuwkoop" <[email protected]>
• st: question on xtscc and on fixed effects in general
  • From: [email protected]
• st: log normal and logistic hazard ratio
  • From: <[email protected]>
• st: First stage F stats - xtivreg
  • From: Agnese Romiti <[email protected]>
• st: simplified implementation of heckman estimator with gllamm
  • From: "marc frechet (statalist)" <[email protected]>
• Re: st: Programming question
  • From: Maarten Buis <[email protected]>
• Re: st: log normal and logistic hazard ratio
  • From: Maarten Buis <[email protected]>
• st: log normal and logistic hazard ratio
  • From: "Yusvita Triwiadhian S." <[email protected]>
• AW: AW: st: Merge Panel Datasets
  • From: "Diana Beketova" <[email protected]>
• st: IV and AR(1)
  • From: Marie-Claire Robitaille-Blanchet <[email protected]>
• RE: st: RE: Problem with xi and xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• SV: st: Reoprob - problem with convergence and superxt
  • From: Andrea Mannberg <[email protected]>
• Re: st: RE: Problem with xi and xtivreg2
  • From: Juan Pablo Cote Baron <[email protected]>
• st: FGLS
  • From: Michael Musyoka <[email protected]>
• st: FGLS
  • From: Michael Musyoka <[email protected]>
• st: RE: Problem with xi and xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• Re: AW: st: Merge Panel Datasets
  • From: Phil Schumm <[email protected]>
• st: Programming question
  • From: Mike Kim <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Stas Kolenikov <[email protected]>
• Re: st: orthogonal complement of a vector
  • From: Stas Kolenikov <[email protected]>
• RE: st: Chow Test Statistic
  • From: Ian Li <[email protected]>
• st: orthogonal complement of a vector
  • From: [email protected]
• st: 3 stage least squares
  • From: sanjesh kumar <[email protected]>
• st: 3 stage least squares
  • From: sanjesh <[email protected]>
• st: three stage least squares
  • From: sanjesh <[email protected]>
• st: three stage least squares
  • From: sanjesh <[email protected]>
• st: three stage least squares
  • From: sanjesh kumar <[email protected]>
• AW: st: Merge Panel Datasets
  • From: "Diana Beketova" <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: "Airey, David C" <[email protected]>
• Re: st: Merge Panel Datasets
  • From: Phil Schumm <[email protected]>
• st: Problem with xi and xtivreg2
  • From: Juan Pablo Cote Baron <[email protected]>
• st: Merge Panel Datasets
  • From: "Diana Beketova" <[email protected]>
• st: orthogonal complement of a vector
  • From: [email protected]
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Joerg Luedicke <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Joerg Luedicke <[email protected]>
• st: pooled mean group and spatial dependence
  • From: [email protected]
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Joerg Luedicke <[email protected]>
• Re: st: how to drop coefficients on fixed effects from the estout command
  • From: Joerg Luedicke <[email protected]>
• Re: st: nl estimation: Error #130 Expression too long
  • From: "Brian P. Poi" <[email protected]>
• st: how to drop coefficients on fixed effects from the estout command
  • From: Ridhima Gupta <[email protected]>
• st: nl estimation: Error #130 Expression too long
  • From: Eugene Bempong Nyantakyi <[email protected]>
• Re: st: how to let loop continue when no observation svy:mean: --capture--gives errors
  • From: Amanda Fu <[email protected]>
• Re: st: Nlsur quaids and IV
  • From: Ana <[email protected]>
• Re: st: how to let loop continue when no observation svy:mean: --capture--gives errors
  • From: Stas Kolenikov <[email protected]>
• st: Sensitivity analysis with MHBOUNDS
  • From: Shikha Sinha <[email protected]>
• st: how to let loop continue when no observation svy:mean: --capture--gives errors
  • From: Amanda Fu <[email protected]>
• st: spmat: banded matrix from friendship list (nlist) + another -sppack- question
  • From: László Sándor <[email protected]>
• st: how to let loop continue when no observation svy:mean: --capture--gives errors
  • From: Amanda Fu <[email protected]>
• Re: st: binary mediation command
  • From: [email protected]
• st: Confidence Intervals after a SUR estimation
  • From: "A.Silva-Montes" <[email protected]>
• st: RE: changing event level panel data to yearly panel data
  • From: Nick Cox <[email protected]>
• st: changing event level panel data to yearly panel data
  • From: ramesh <[email protected]>
• re: Re: st: binary mediation command
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: Reoprob - problem with convergence and superxt
  • From: Maarten Buis <[email protected]>
• Re: st: Reoprob - problem with convergence and superxt
  • From: Richard Williams <[email protected]>
• Re: st: flongsep and pooled estimates
  • From: Joerg Luedicke <[email protected]>
• Re: st: Chow Test Statistic
  • From: Richard Williams <[email protected]>
• st: Anderson-Hsiao, ivreg and xtabond2
  • From: Bernardo Schettini <[email protected]>
• st: Reoprob - problem with convergence and superxt
  • From: Andrea Mannberg <[email protected]>
• Re: st: Using sampling/probability weights for mixed design ANOVA in STATA
  • From: Steven Samuels <[email protected]>
• Re: st: New package -xglm- for SSC
  • From: Roger Newson <[email protected]>
• RE: st: flongsep and pooled estimates
  • From: "Wike, Traci" <[email protected]>
• st: New package -xglm- for SSC
  • From: Roger Newson <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: Roger Newson <[email protected]>
• st: Model fit in fractional logit
  • From: Maarten Buis <[email protected]>
• RE: st: Chow Test Statistic
  • From: Ian Li <[email protected]>
• Re: st: Chow Test Statistic
  • From: Maarten Buis <[email protected]>
• Re: st: Setting a reference value by rows for calculating differences
  • From: Maarten Buis <[email protected]>
• st: Setting a reference value by rows for calculating differences
  • From: CHERYL BARNABE <[email protected]>
• st: Chow Test Statistic
  • From: Ian Li <[email protected]>
• Re: st: Using sampling/probability weights for mixed design ANOVA in STATA
  • From: Meg Dennison <[email protected]>
• Re: st: flongsep and pooled estimates
  • From: Joerg Luedicke <[email protected]>
• st: flongsep and pooled estimates
  • From: "Wike, Traci" <[email protected]>
• Re: st: finding incorrectly entered data
  • From: Michael Eisenberg <[email protected]>
• Re: st: FIML Recursive Bivariate Normal Model
  • From: "Dr. Bartus" <[email protected]>
• Re: st: regarding negative lag coefficient in xtabond regressions
  • From: Narasimhan Sowmyanarayanan <[email protected]>
• Re: st: regarding negative lag coefficient in xtabond regressions
  • From: Markus Eberhardt <[email protected]>
• st: regarding negative lag coefficient in xtabond regressions
  • From: Narasimhan Sowmyanarayanan <[email protected]>
• Re: st: Missing standard error of constant term
  • From: Maarten Buis <[email protected]>
• Re: st: about AIC
  • From: Steven Samuels <[email protected]>
• st: Haussman test Question
  • From: sam sampton <[email protected]>
• st: inteff: calulations by hand
  • From: Florian Seliger <[email protected]>
• st: Cross sectional dependence
  • From: Rodrigo Refoios Camejo <[email protected]>
• st: Time trend in pooled mean group estimation- xtpmg command
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• Re: st: about AIC
  • From: Steven Samuels <[email protected]>
• st: Pooled mean group and mean group estimator - xtpmg command
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• RE: st: RE: RE: RE: Graph: Control plot region- contract, not expand
  • From: "Fiedler, James (JSC-SK)[USRA]" <[email protected]>
• Re: st: Missing standard error of constant term
  • From: Nyasha Tirivayi <[email protected]>
• st: Discrete choice analysis considerations
  • From: Donald Spady <[email protected]>
• Re: st: Different results with Stata 10 and Stata 11
  • From: Maarten Buis <[email protected]>
• Re: st: Missing standard error of constant term
  • From: Maarten Buis <[email protected]>
• Re: st: RE: RE: RE: Graph: Control plot region- contract, not expand
  • From: Amanda Blakely Delp <[email protected]>
• st: Missing standard error of constant term
  • From: Nyasha Tirivayi <[email protected]>
• Re: st: RE: RE: Graph: Control plot region- contract, not expand
  • From: Amanda Blakely Delp <[email protected]>
• st: RE: RE: RE: Graph: Control plot region- contract, not expand
  • From: "Fiedler, James (JSC-SK)[USRA]" <[email protected]>
• st: RE: RE: Graph: Control plot region- contract, not expand
  • From: DE SOUZA Eric <[email protected]>
• st: RE: Graph: Control plot region- contract, not expand
  • From: "Fiedler, James (JSC-SK)[USRA]" <[email protected]>
• Re: st: Different results with Stata 10 and Stata 11
  • From: Austin Nichols <[email protected]>
• st: Graph: Control plot region- contract, not expand
  • From: Amanda Blakely Delp <[email protected]>
• st: conditional imputation using ICE
  • From: "Miller, Daniel P" <[email protected]>
• Re: st: Different results with Stata 10 and Stata 11
  • From: Beatrice Crozza <[email protected]>
• Re: st: about AIC
  • From: Joerg Luedicke <[email protected]>
• Re: st: about AIC
  • From: Steven Samuels <[email protected]>
• RE: st: How to convert variable values in tables and panels to CPI adjusted values
  • From: Erik Aadland <[email protected]>
• Re: st: How to convert variable values in tables and panels to CPI adjusted values
  • From: David Kantor <[email protected]>
• Re: st: How to convert variable values in tables and panels to CPI adjusted values
  • From: Maarten Buis <[email protected]>
• st: Panel unit root, heteroskedasticity and autocorrelation
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• st: Fixed effects
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• st: Heteroskedasticity and autocorrelation in non-stationary panel
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• st: Pooled mean group and mean group models
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• st: How to convert variable values in tables and panels to CPI adjusted values
  • From: Erik Aadland <[email protected]>
• st: RE: Different results with Stata 10 and Stata 11
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Different results with Stata 10 and Stata 11
  • From: Maarten Buis <[email protected]>
• st: Different results with Stata 10 and Stata 11
  • From: Beatrice Crozza <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Duru <[email protected]>
• Re: st: Using sampling/probability weights for mixed design ANOVA in STATA
  • From: Steven Samuels <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Steven Samuels <[email protected]>
• Re: st: binary mediation command
  • From: Maarten Buis <[email protected]>
• Re: st: binary mediation command
  • From: Maarten Buis <[email protected]>
• Re: st: RE: counting number of variables in a varlist
  • From: Nick Cox <[email protected]>
• st: about AIC
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: st: Using sampling/probability weights for mixed design ANOVA in STATA
  • From: Steven Samuels <[email protected]>
• st: RE: counting number of variables in a varlist
  • From: "ali hashemi" <[email protected]>
• st: RE: counting number of variables in a varlist
  • From: Nick Cox <[email protected]>
• st: RE: how to calculate cumulative number of organizations for stcox?
  • From: Nick Cox <[email protected]>
• st: counting number of variables in a varlist
  • From: "ali hashemi" <[email protected]>
• Re: st: binary mediation command
  • From: Philip Ender <[email protected]>
• Re: st: finding incorrectly entered data
  • From: Fred Wolfe <[email protected]>
• Re: st: finding incorrectly entered data
  • From: Richard Goldstein <[email protected]>
• Re: st: finding incorrectly entered data
  • From: Phil Schumm <[email protected]>
• st: finding incorrectly entered data
  • From: Michael Eisenberg <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: DE SOUZA Eric <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: FIML Recursive Bivariate Normal Model
  • From: Austin Nichols <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: DE SOUZA Eric <[email protected]>
• st: how to calculate cumulative number of organizations for stcox?
  • From: Caleb Southworth <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: DE SOUZA Eric <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• RE: RE: RE: st: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• st: binary mediation command
  • From: Pina Valle <[email protected]>
• Re: st: Pweights in SUREG?
  • From: Benjamin Harris <[email protected]>
• st: FIML Recursive Bivariate Normal Model
  • From: Brent Gibbons <[email protected]>
• Re: RE: RE: st: Valid instrument test for exactly identified regression
  • From: "Justina Fischer" <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Duru <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: DE SOUZA Eric <[email protected]>
• Re: RE: st: Valid instrument test for exactly identified regression
  • From: "Justina Fischer" <[email protected]>
• Re: RE: st: Valid instrument test for exactly identified regression
  • From: [email protected]
• st: RE: Power analysis in STATA
  • From: "David Radwin" <[email protected]>
• RE: RE: st: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• Re: RE: st: Valid instrument test for exactly identified regression
  • From: "Justina Fischer" <[email protected]>
• RE: st: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Valid instrument test for exactly identified regression
  • From: "Justina Fischer" <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: Richard Goldstein <[email protected]>
• st: RE: RE: Valid instrument test for exactly identified regression
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Valid instrument test for exactly identified regression
  • From: [email protected]
• st: RE: Valid instrument test for exactly identified regression
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Valid instrument test for exactly identified regression
  • From: "Justina Fischer" <[email protected]>
• st: Valid instrument test for exactly identified regression
  • From: [email protected]
• Re: st: Mixed logit estimation with mixlogit
  • From: Tunga Kantarcı <[email protected]>
• Re: st: Mixed logit estimation with mixlogit
  • From: Arne Risa Hole <[email protected]>
• st: Re: statalist-digest V4 #4184
  • From: Christopher Baum <[email protected]>
• Re: st: long table
  • From: Nick Cox <[email protected]>
• st: Power analysis in STATA
  • From: martine etienne <[email protected]>
• Re: st: reshape without index
  • From: Maarten Buis <[email protected]>
• Re: st: long table
  • From: Maarten Buis <[email protected]>
• R: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: Using sampling/probability weights for mixed design ANOVA in STATA
  • From: Meg Dennison <[email protected]>
• st: RE: Intraday volatility
  • From: Daniel Esteves dos Reis <[email protected]>
• st: Cointegration in panel
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: Steven Samuels <[email protected]>
• Re: st: long table
  • From: Steven Samuels <[email protected]>
• st: prgen after probit: "compression error"
  • From: Deepak Hegde <[email protected]>
• st: effect sizes after xtreg
  • From: Filipa de Castro <[email protected]>
• Re: st: long table
  • From: Argyn Kuketayev <[email protected]>
• st: long table
  • From: [email protected]
• Re: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Internal Rate of Return Calculation
  • From: Argyn Kuketayev <[email protected]>
• Re: st: Internal Rate of Return Calculation
  • From: Argyn Kuketayev <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: "Airey, David C" <[email protected]>
• RE: st: Power analysis in STATA
  • From: "David Radwin" <[email protected]>
• Re: st: Power analysis in STATA
  • From: martine etienne <[email protected]>
• RE: st: Power analysis in STATA
  • From: "David Radwin" <[email protected]>
• Re: st: Singeling out datasets containing variable X in folder with many stata files
  • From: Stas Kolenikov <[email protected]>
• st: reshape without index
  • From: Caleb Southworth <[email protected]>
• Re: st: Power analysis in STATA
  • From: Richard Goldstein <[email protected]>
• Re: st: Internal Rate of Return Calculation
  • From: Dawood Ashraf <[email protected]>
• st: Power analysis in STATA
  • From: martine etienne <[email protected]>
• Re: st: tukey/dunnett procedures
  • From: Roger Newson <[email protected]>
• st: Fwd: [MULTILEVEL] New SIM paper by Zhang, Lu, Feng, Thurston, Xia, Zhu, and Tu
  • From: Stas Kolenikov <[email protected]>
• st: Adjust and Partial observability bivariate probits
  • From: Jean-Christophe Boucher <[email protected]>
• re: st: tukey/dunnett procedures
  • From: "Airey, David C" <[email protected]>
• RE: st: Internal Rate of Return Calculation
  • From: "Jeff" <[email protected]>
• Re: st: relative importance of independent variables
  • From: Richard Williams <[email protected]>
• Re: st: Internal Rate of Return Calculation
  • From: Austin Nichols <[email protected]>
• R: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: "Carlo Lazzaro" <[email protected]>
• R: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: Internal Rate of Return Calculation
  • From: Austin Nichols <[email protected]>
• Re: st: Singeling out datasets containing variable X in folder with many stata files
  • From: Eric Booth <[email protected]>
• Re: st: Singeling out datasets containing variable X in folder with many stata files
  • From: Eric Booth <[email protected]>
• Re: st: Xtivreg2: Dropping dummy variables due to Collinearity
  • From: Austin Nichols <[email protected]>
• Re: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: Austin Nichols <[email protected]>
• Re: st: Mixed logit estimation with mixlogit
  • From: Tunga Kantarcı <[email protected]>
• Re: st: Xtivreg2: Dropping dummy variables due to Collinearity
  • From: Shonda Naples <[email protected]>
• Re: st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: Sergiy Radyakin <[email protected]>
• st: tukey/dunnett procedures
  • From: Richard Goldstein <[email protected]>
• Re: st: Different types of missing data and MI
  • From: "Clyde Schechter" <[email protected]>
• Re: st: Mixed logit estimation with mixlogit
  • From: Arne Risa Hole <[email protected]>
• Re: st: Xtivreg2: Dropping dummy variables due to Collinearity
  • From: Maarten Buis <[email protected]>
• st: Mixed logit estimation with mixlogit
  • From: Tunga Kantarcı <[email protected]>
• Re: st: FW: Adding a scalar to a graph note
  • From: Phil Schumm <[email protected]>
• st: Xtivreg2: Dropping dummy variables due to Collinearity
  • From: vikramfinavker <[email protected]>
• Re: st: Candlestick charts
  • From: Michael Hecker <[email protected]>
• RE: st: FW: Adding a scalar to a graph note
  • From: Nick Cox <[email protected]>
• st: error 506 (matrix not positive definite) when bootstrapping eigenvalue after one-way manova
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: FW: Adding a scalar to a graph note
  • From: Phil Schumm <[email protected]>
• st: Fwd: Call for Participation: Open Economics WG
  • From: Guo Xu <[email protected]>
• st: New article comparing software for GLMMs with binary responses
  • From: Roger Harbord <[email protected]>
• Re: st: relative importance of independent variables
  • From: Fred Wolfe <[email protected]>
• Re: st: relative importance of independent variables
  • From: Maarten Buis <[email protected]>
• st: relative importance of independent variables
  • From: Stefan Nijssen <[email protected]>
• Re: st: FW: Adding a scalar to a graph note
  • From: Oliver Jones <[email protected]>
• st: FW: Adding a scalar to a graph note
  • From: Barry Quinn <[email protected]>
• st: Singeling out datasets containing variable X in folder with many stata files
  • From: Lukas Maximilian Rudolph <[email protected]>
• RE: st: Modelling extremely rare events (binary)
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Modelling extremely rare events (binary)
  • From: Markus Eberhardt <[email protected]>
• Re: st: Modelling extremely rare events (binary)
  • From: Markus Eberhardt <[email protected]>
• RE: st: Modelling extremely rare events (binary)
  • From: DE SOUZA Eric <[email protected]>
• st: Re: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• Re: st: Modelling extremely rare events (binary)
  • From: Abhimanyu Arora <[email protected]>
• st: Candlestick charts
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: Modelling extremely rare events (binary)
  • From: Markus Eberhardt <[email protected]>
• st: Course: Advanced Stata- programming and other techniques to make your life easier
  • From: <[email protected]>
• Re: st: Modelling extremely rare events (binary)
  • From: Maarten Buis <[email protected]>
• Re: st: Re: Analyzing time series data on prices by districts & markets
  • From: Chris Parker <[email protected]>
• st: Modelling extremely rare events (binary)
  • From: Markus Eberhardt <[email protected]>
• RE: st: RE: descogini with weights
  • From: philippe van kerm <[email protected]>
• st: Re: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• st: Re: Re: st: Re: Re: st: oaxaca decomposition
  • From: Zuzana Machová <[email protected]>
• st: Internal Rate of Return Calculation
  • From: "M. S." <[email protected]>
• st: R: How to generate a random variable with PDF gamma(a,b,g,x)
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: Merge by range of values
  • From: Phil Schumm <[email protected]>
• Re: st: Different types of missing data and MI
  • From: Austin Nichols <[email protected]>
• st: Different types of missing data and MI
  • From: "Clyde Schechter" <[email protected]>
• st: Merge by range of values
  • From: "Jeremy A. Grey" <[email protected]>
• st: stcoxkm command for testing PH assumption
  • From: "Weichle, Thomas" <[email protected]>
• Re: st: Japanese Candlestick Charts
  • From: Neil Shephard <[email protected]>
• Re: st: lpoly predict residuals
  • From: Alex Olssen <[email protected]>
• Re: st: Twitter Message Sub-string Extraction?
  • From: Eric Booth <[email protected]>
• st: marginal effects in biprobit
  • From: Janice Compton <[email protected]>
• st: marginal effects in biprobit
  • From: Janice Compton <[email protected]>
• st: How to generate a random variable with PDF gamma(a,b,g,x)
  • From: "Tiago V. Pereira" <[email protected]>
• Re: st: Twitter Message Sub-string Extraction?
  • From: Richard Fairbanks <[email protected]>
• st: RE: How to generate a random variable with PDF gamma(a,b,g,x)
  • From: Nick Cox <[email protected]>
• st: How to generate a random variable with PDF gamma(a,b,g,x)
  • From: "Tiago V. Pereira" <[email protected]>
• st: Making Tables with unit root test results
  • From: Barbara Engels <[email protected]>
• st: three way interaction in a logit model using the delta method
  • From: "Hopkins, Justin" <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: NB-2 and NB-P Modelling using Stata 10
  • From: [email protected]
• st: RE: Japanese Candlestick Charts
  • From: Nick Cox <[email protected]>
• st: RE: Re: Analyzing time series data on prices by districts & markets
  • From: Nick Cox <[email protected]>
• st: Japanese Candlestick Charts
  • From: Michael Hecker <[email protected]>
• Re: st: Handling pharmacy data with multiple entries per subject
  • From: Phil Schumm <[email protected]>
• st: panel unit roots and cointegration
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• Re: st: NB-2 and NB-P Modelling using Stata 10
  • From: Muhammad Anees <[email protected]>
• st: Re: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• Re: st: longitudinal data
  • From: "joshua liwindi" <[email protected]>
• st: longitudinal data
  • From: "Clyde Schechter" <[email protected]>
• Re: st: Re: Analyzing time series data on prices by districts & markets
  • From: Chris Parker <[email protected]>
• Re: st: Re: Analyzing time series data on prices by districts & markets
  • From: Chris Parker <[email protected]>
• R: st: RE: descogini with weights
  • From: "[email protected]" <[email protected]>
• st: Re: re: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• Re: st: RE: descogini with weights
  • From: Austin Nichols <[email protected]>
• st: RE: descogini with weights
  • From: Nick Cox <[email protected]>
• st: Thread-Index: AQHMKdeuEm1fDg0j7ECQhOMRPfwUSw==
  • From: "Terzopoulou, Eleftheria" <[email protected]>
• [no subject]
  • From: Unknown
• st: Re: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• Re: st: Fuzzy matching (so to say) based on geographical coordinates
  • From: Nils Braakmann <[email protected]>
• st: di-graphs for sppack
  • From: [email protected]
• st: descogini with weights
  • From: "[email protected]" <[email protected]>
• RE: st: longitudinal data
  • From: "joshua liwindi" <[email protected]>
• RE: st: longitudinal data
  • From: Nick Cox <[email protected]>
• Re: st: Fuzzy matching (so to say) based on geographical coordinates
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Fuzzy matching (so to say) based on geographical coordinates
  • From: Austin Nichols <[email protected]>
• Re: AW: st: add column in -tabout- for symbols
  • From: Eric Booth <[email protected]>
• st: Fuzzy matching (so to say) based on geographical coordinates
  • From: Nils Braakmann <[email protected]>
• AW: st: add column in -tabout- for symbols
  • From: "Kaulisch, Marc" <[email protected]>
• RE: st: longitudinal data
  • From: Nick Cox <[email protected]>
• st: RE: Analyzing time series data on prices by districts & markets
  • From: Nick Cox <[email protected]>
• Re: st: lpoly predict residuals
  • From: Maarten Buis <[email protected]>
• Re: st: RE: FW: help on variable selection problem
  • From: "Lachenbruch, Peter" <[email protected]>
• RE: st: longitudinal data
  • From: "joshua liwindi" <[email protected]>
• st: RE: lpoly predict residuals
  • From: Nick Cox <[email protected]>
• st: lpoly predict residuals
  • From: Stefan Pichler <[email protected]>
• Re: st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Maarten Buis <[email protected]>
• Re: st: FW: help on variable selection problem
  • From: Ronan Conroy <[email protected]>
• Re: st: NB-2 and NB-P Modelling using Stata 10
  • From: [email protected]
• st: Analyzing time series data on prices by districts & markets
  • From: Partho Sarkar <[email protected]>
• Re: st: Re: Visualizing continuous by continuous interaction in xtlogit
  • From: Maarten Buis <[email protected]>
• Re: st: add column in -tabout- for symbols
  • From: Eric Booth <[email protected]>
• st: NB-2 and NB-P Modelling using Stata 10
  • From: Muhammad Anees <[email protected]>
• RE: st: longitudinal data
  • From: "Seed, Paul" <[email protected]>
• Re: st: Creating a dummy for each large firm in each fiscal year (foreach command)
  • From: Nick Cox <[email protected]>
• st: Re: Visualizing continuous by continuous interaction in xtlogit
  • From: Mathijs de Vaan <[email protected]>
• st: longitudinal data
  • From: "joshua liwindi" <[email protected]>
• Re: st: Creating a dummy for each large firm in each fiscal year (foreach command)
  • From: Nick Cox <[email protected]>
• Re: st: Twitter Message Sub-string Extraction?
  • From: Nick Cox <[email protected]>
• st: Re: Creating a dummy for each large firm in each fiscal year
  • From: Christopher Baum <[email protected]>
• st: add column in -tabout- for symbols
  • From: "Kaulisch, Marc" <[email protected]>
• Re: st: test or ftest command
  • From: Lisa Marie Yarnell <[email protected]>
• RE: re: st: graph scheme tufte
  • From: [email protected]
• Re: st: Autocorrelation(testparm or wntstmvq?)
  • From: Katia Bobulova <[email protected]>
• Re: st: Twitter Message Sub-string Extraction?
  • From: Eric Booth <[email protected]>
• Re: st: Creating a dummy for each large firm in each fiscal year (foreach command)
  • From: daniel klein <[email protected]>
• st: Twitter Message Sub-string Extraction?
  • From: Richard Fairbanks <[email protected]>
• st: Creating a dummy for each large firm in each fiscal year (foreach command)
  • From: Martijn S <[email protected]>
• st: longitudinal data
  • From: "joshua liwindi" <[email protected]>
• Re: st: Decompose the technical efficiency
  • From: Song Nhac <[email protected]>
• st: Simultaneous probit model
  • From: Danny Dan <[email protected]>
• Re: st: Decompose the technical efficiency
  • From: Scott Merryman <[email protected]>
• Re: st: Autocorrelation(testparm or wntstmvq?)
  • From: Robson Glasscock <[email protected]>
• Re: st: variable to enumerate children panel dataset
  • From: Nick Cox <[email protected]>
• Re: st: RE: FW: help on variable selection problem
  • From: Steven Samuels <[email protected]>
• re: st: graph scheme tufte
  • From: "Airey, David C" <[email protected]>
• Re: st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Stefan Nijssen <[email protected]>
• st: Decompose the technical efficiency
  • From: Song Nhac <[email protected]>
• RE: st: Handling pharmacy data with multiple entries per subject
  • From: "Sarah Edgington" <[email protected]>
• RE: st: Handling pharmacy data with multiple entries per subject
  • From: "Doernberg, Sarah" <[email protected]>
• st: di-graphs for sppack
  • From: László Sándor <[email protected]>
• Re: st: Handling pharmacy data with multiple entries per subject
  • From: Phil Schumm <[email protected]>
• Re: st: managing changing variable names, types over multiple files
  • From: Paul Burkander <[email protected]>
• Re: st: Handling pharmacy data with multiple entries per subject
  • From: Michael Hecker <[email protected]>
• Re: st: FW: help on variable selection problem
  • From: Joerg Luedicke <[email protected]>
• st: Assistance on variable selection problem
  • From: "Lachenbruch, Peter" <[email protected]>
• st: RE: FW: help on variable selection problem
  • From: "Sarah Edgington" <[email protected]>
• st: Handling pharmacy data with multiple entries per subject
  • From: "Doernberg, Sarah" <[email protected]>
• st: FW: help on variable selection problem
  • From: "Lachenbruch, Peter" <[email protected]>
• st: graph scheme tufte
  • From: "Airey, David C" <[email protected]>
• Re: st: managing changing variable names, types over multiple files
  • From: Eric Booth <[email protected]>
• Re: st: Re: Re: st: oaxaca decomposition
  • From: Mosi Ifatunji <[email protected]>
• st: managing changing variable names, types over multiple files
  • From: Paul Burkander <[email protected]>
• Re: st: Conditional Probabilities after bivariate probit
  • From: Austin Nichols <[email protected]>
• st: Conditional Probabilities after bivariate probit
  • From: orc un <[email protected]>
• Re: st: Query about finding predicted change in probability after logit for changing two variables
  • From: Urmi Bhattacharya <[email protected]>
• RE: st: Problems reading in comma separated files
  • From: Orian Brook <[email protected]>
• RE: st: Formatting Dates
  • From: "Anna M. Pees" <[email protected]>
• Re: st: Query about finding predicted change in probability after logit for changing two variables
  • From: Urmi Bhattacharya <[email protected]>
• RE: st: Formatting Dates
  • From: "Lachenbruch, Peter" <[email protected]>
• RE: st: Formatting Dates
  • From: "Anna M. Pees" <[email protected]>
• Re: st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Maarten Buis <[email protected]>
• Re: st: Problems reading in comma separated files
  • From: Ronan Conroy <[email protected]>
• RE: st: Formatting Dates
  • From: "Anna M. Pees" <[email protected]>
• st: Calibration plot after stcox
  • From: Andrzej Niemierko <[email protected]>
• RE: st: Formatting Dates
  • From: "Miller, Daniel P" <[email protected]>
• Re: st: Formatting Dates
  • From: Oliver Jones <[email protected]>
• st: Problems reading in comma separated files
  • From: Orian Brook <[email protected]>
• Re: st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Stefan Nijssen <[email protected]>
• st: Autocorrelation(testparm or wntstmvq?)
  • From: Katia Bobulova <[email protected]>
• st: variable to enumerate children panel dataset
  • From: "Prado De Castro Alfaiate, Jorge" <[email protected]>
• RE: st: Formatting Dates
  • From: "Anna M. Pees" <[email protected]>
• Re: st: Formatting Dates
  • From: Oliver Jones <[email protected]>
• st: Formatting Dates
  • From: Amp <[email protected]>
• Re: st: test or ftest command
  • From: Jeffrey Wooldridge <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: "Laura R." <[email protected]>
• Re: st: non normality on fixed effect and random effect model
  • From: Maarten Buis <[email protected]>
• st: non normality on fixed effect and random effect model
  • From: "Yusvita Triwiadhian S." <[email protected]>
• RE: st: logistic regression confidenceintervals
  • From: "Fitzmaurice, A.E." <[email protected]>
• Re: st: probing interactions with continuous variables with mi test / mi test transform
  • From: daniel klein <[email protected]>
• Re: st: asking probability distribution for survival
  • From: Maarten Buis <[email protected]>
• Re: st: attaching text and tables to graphs
  • From: Clive Nicholas <[email protected]>
• RE: st: attaching text and tables to graphs
  • From: Randy Kesselring <[email protected]>
• Re: st: logistic regression confidenceintervals
  • From: Steven Samuels <[email protected]>
• RE: st: attaching text and tables to graphs
  • From: "Richard Mc Gee" <[email protected]>
• Re: st: Clustered, longitudinal data with ordinal outcome
  • From: Stas Kolenikov <[email protected]>
• Re: st: Merging based on dates
  • From: Orla Liston <[email protected]>
• Re: st: Merging based on dates
  • From: Eric Booth <[email protected]>
• Re: st: Merging based on dates
  • From: Daniel Marcelino <[email protected]>
• st: Use of psar1 and ar1 with xtpcse
  • From: Samuel Finkelstein <[email protected]>
• st: Clustered, longitudinal data with ordinal outcome
  • From: Wayne Sandholtz <[email protected]>
• Re: st: Re: Re: st: oaxaca decomposition
  • From: olorunfemi sola <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Austin Nichols <[email protected]>
• Re: st: Query about finding predicted change in probability after logit for changing two variables
  • From: Austin Nichols <[email protected]>
• st: Flogit: does it support cluster robust?
  • From: Shonda Naples <[email protected]>
• Re: st: calculating latitude and longitude of nearby point
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: calculating alphas with imputed data
  • From: daniel klein <[email protected]>
• st: Re:
  • From: daniel klein <[email protected]>
• st: Re: geocode missing tempfile
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Urmi Bhattacharya <[email protected]>
• st: Merging based on dates
  • From: Orla Liston <[email protected]>
• Re: st: calculating latitude and longitude of nearby point
  • From: Robert Picard <[email protected]>
• RE: st: Select the last 4 numbers out of 8...
  • From: [email protected]
• Re: st: Problem with margins after logit on a person period data
  • From: Urmi Bhattacharya <[email protected]>
• st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: "Jacobs, David" <[email protected]>
• st: asking probability distribution for survival
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: st: Query about finding predicted change in probability after logit for changing two variables
  • From: Urmi Bhattacharya <[email protected]>
• R: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: "Carlo Lazzaro" <[email protected]>
• st: probing interactions with continuous variables with mi test / mi test transform
  • From: Justina Kamiel Grayman <[email protected]>
• st: RE: RE: creating combined correlation of dummy (ordered multilevel)
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: Pweights in SUREG?
  • From: Austin Nichols <[email protected]>
• Re: st: Query about finding predicted change in probability after logit for changing two variables
  • From: Austin Nichols <[email protected]>
• RE: st: hosmer lemshow goodness of fit statistics
  • From: "Lachenbruch, Peter" <[email protected]>
• st: logistic regression confidenceintervals
  • From: "Fitzmaurice, A.E." <[email protected]>
• Re: st: programming question for instrument scoring with weights
  • From: Stas Kolenikov <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Austin Nichols <[email protected]>
• Re: st: programming question for instrument scoring with weights
  • From: Austin Nichols <[email protected]>
• RE: st: programming question for instrument scoring with weights
  • From: "Lucea, Marguerite" <[email protected]>
• st: RE: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Nick Cox <[email protected]>
• Re: st: programming question for instrument scoring with weights
  • From: Stas Kolenikov <[email protected]>
• st: generating grouped relative survival estimates from stpm2
  • From: Tim Evans <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Austin Nichols <[email protected]>
• st: RE: creating combined correlation of dummy (ordered multilevel)
  • From: Nick Cox <[email protected]>
• st: Re: Re: st: oaxaca decomposition
  • From: Zuzana Machová <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Steven Samuels <[email protected]>
• Re: st: programming question for instrument scoring with weights
  • From: Austin Nichols <[email protected]>
• RE: st: Select the last 4 numbers out of 8...
  • From: Nick Cox <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Maarten Buis <[email protected]>
• RE: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Nick Cox <[email protected]>
• Re: st: RE: generalized impulse response function
  • From: "b.tracy" <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: "P. Lopes-Monteiro" <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Austin Nichols <[email protected]>
• Re: st: programming question for instrument scoring with weights
  • From: Stas Kolenikov <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Stas Kolenikov <[email protected]>
• Re: st: Select the last 4 numbers out of 8...
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Steven Samuels <[email protected]>
• st: Query about finding predicted change in probability after logit for changing two variables
  • From: Urmi Bhattacharya <[email protected]>
• st: creating combined correlation of dummy (ordered multilevel)
  • From: Stefan Nijssen <[email protected]>
• st: Select the last 4 numbers out of 8...
  • From: Ivy Shiue <[email protected]>
• st: minimum number of obs for xtmixed
  • From: "Miller, Daniel P" <[email protected]>
• st: programming question for instrument scoring with weights
  • From: "Lucea, Marguerite" <[email protected]>
• Re: st: attaching text and tables to graphs
  • From: Eric Booth <[email protected]>
• Re: st: calculating latitude and longitude of nearby point
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: attaching text and tables to graphs
  • From: Eric Booth <[email protected]>
• Re: st: How to model a positive continuous dependent variable with many zeros?
  • From: Adriaan Hoogendoorn <[email protected]>
• Re: st: calculating alphas with imputed data
  • From: Justina Kamiel Grayman <[email protected]>
• Re: st: attaching text and tables to graphs
  • From: Eric Booth <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Maarten Buis <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: "P. Lopes-Monteiro" <[email protected]>
• Re: st: Combining inteff, margeff and outreg2
  • From: Maarten Buis <[email protected]>
• RE: st: calculating latitude and longitude of nearby point
  • From: Nick Cox <[email protected]>
• st: Combining inteff, margeff and outreg2
  • From: "Florian Seliger" <[email protected]>
• Re: st: _rmdcoll with glamm
  • From: Nick Cox <[email protected]>
• st: _rmdcoll with glamm
  • From: alec minnema <[email protected]>
• st: FW: Use of results in variable name
  • From: alec minnema <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Duru <[email protected]>
• Re: st: attaching text and tables to graphs
  • From: Maarten Buis <[email protected]>
• Re: st: calculating alphas with imputed data
  • From: daniel klein <[email protected]>
• st: RE: generalized impulse response function
  • From: DE SOUZA Eric <[email protected]>
• st: attaching text and tables to graphs
  • From: Richard Mc Gee <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Richard Williams <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Urmi Bhattacharya <[email protected]>
• Re: st: replace part of string variable
  • From: Keith Dear <[email protected]>
• Re: st: replace part of string variable
  • From: Keith Dear <[email protected]>
• Re: st: hosmer lemshow goodness of fit statistics
  • From: "Yusvita Triwiadhian S." <[email protected]>
• st: Adjustment to Stata results window scrolling
  • From: Nick Sanders <[email protected]>
• st: calculating alphas with imputed data
  • From: Justina Kamiel Grayman <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Richard Williams <[email protected]>
• Re: st: Problem with margins after logit on a person period data
  • From: Eric Booth <[email protected]>
• Re: st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Fatih Unlu <[email protected]>
• Re: st: Coefficients in xtpcse
  • From: "Justina Fischer" <[email protected]>
• st: Pweights in SUREG?
  • From: Benjamin Harris <[email protected]>
• Re: st: hosmer lemshow goodness of fit statistics
  • From: Ari Samaranayaka <[email protected]>
• st: Problem with margins after logit on a person period data
  • From: Urmi Bhattacharya <[email protected]>
• Re: st: hosmer lemshow goodness of fit statistics
  • From: Steven Samuels <[email protected]>
• st: Comparing weighted and unweighted distributions via Chi2 test
  • From: Duru <[email protected]>
• Re: st: weights and pooling question
  • From: Austin Nichols <[email protected]>
• Re: st: calculating latitude and longitude of nearby point
  • From: Scott Merryman <[email protected]>
• st: weights and pooling question
  • From: Ladislav Kozak <[email protected]>
• st: generalized impulse response function
  • From: "b.tracy" <[email protected]>
• Re: Re: st: .dta storage, why is too big?
  • From: Daniel Marcelino <[email protected]>
• Re: st: Coefficients in xtpcse
  • From: [email protected]
• Re: Re: st: .dta storage, why is too big?
  • From: Austin Nichols <[email protected]>
• Re: Re: st: .dta storage, why is too big?
  • From: "Clyde Schechter" <[email protected]>
• Re: st: oaxaca decomposition
  • From: Austin Nichols <[email protected]>
• Re: Re: st: .dta storage, why is too big?
  • From: "Clyde Schechter" <[email protected]>
• st: Coefficients in xtpcse
  • From: [email protected]
• st: RE: replace part of string variable
  • From: Nick Cox <[email protected]>
• Re: st: test or ftest command
  • From: Joerg Luedicke <[email protected]>
• st: replace part of string variable
  • From: raoul reulen <[email protected]>
• Re: st: RE: How to create sum of variables by time and space
  • From: "Ahmedov, Zafarbek" <[email protected]>
• st: oaxaca decomposition
  • From: Zuzana Machová <[email protected]>
• st: RE: Error message with predictnl
  • From: Nick Cox <[email protected]>
• st: Error message with predictnl
  • From: Urmi Bhattacharya <[email protected]>
• RE: st: RE: How to create sum of variables by time and space
  • From: Nick Cox <[email protected]>
• Re: st: RE: How to create sum of variables by time and space
  • From: "Ahmedov, Zafarbek" <[email protected]>
• st: How to create sum of variables by time and space
  • From: "Ahmedov, Zafarbek" <[email protected]>
• st: RE: How to create sum of variables by time and space
  • From: Nick Cox <[email protected]>
• Re: st: Regression splines with survey data
  • From: Stas Kolenikov <[email protected]>
• st: test or ftest command
  • From: Lisa Marie Yarnell <[email protected]>
• st: Regression splines with survey data
  • From: "Prisciandaro, James J" <[email protected]>
• Re: st: Extreme data points
  • From: Austin Nichols <[email protected]>
• st: RE: Scatter and line graphs with by option
  • From: Nick Cox <[email protected]>
• RE: st: .dta storage, why is too big?
  • From: Nick Cox <[email protected]>
• st: Scatter and line graphs with by option
  • From: Beatrice Crozza <[email protected]>
• Re: st: Extreme data points
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: .dta storage, why is too big?
  • From: Ronan Conroy <[email protected]>
• Re: st: Extreme data points
  • From: Austin Nichols <[email protected]>
• Re: st: String Variable
  • From: Joerg Luedicke <[email protected]>
• Re: st: String Variable
  • From: Richard Goldstein <[email protected]>
• st: String Variable
  • From: yj <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Maarten Buis <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Jeffrey Wooldridge <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: "P. Lopes-Monteiro" <[email protected]>
• Re: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Jen Zhen <[email protected]>
• Re: st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: Maarten Buis <[email protected]>
• Re: st: imposing cross-equation constrains with nlsur
  • From: "Brian P. Poi" <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: "Brian P. Poi" <[email protected]>
• st: Panel data estimation - econometric advice needed
  • From: Rodrigo Refoios Camejo <[email protected]>
• st: Leamer's Extreme Bound Analysis and Fixed Effect
  • From: pl344 <[email protected]>
• Re: st: Extreme data points
  • From: Austin Nichols <[email protected]>
• Re: st: hosmer lemshow goodness of fit statistics
  • From: "Yusvita Triwiadhian S." <[email protected]>
• Re: st: parametric survival analysis - choosing the probability distribution
  • From: Maarten Buis <[email protected]>
• Re: st: imposing cross-equation constrains with nlsur
  • From: ABDUL ADAM <[email protected]>
• st: No. of observations under GMM
  • From: lreine ycenna <[email protected]>
• RE: -which- [was: Re: st: AW: RE: Error ivreg2 ...]
  • From: "Schaffer, Mark E" <[email protected]>
• st: unbalanced panel variable
  • From: "Achmed Aldai" <[email protected]>
• Re: st: Tests for cross sectional dependence when xttest2 doesn't work
  • From: Christopher Baum <[email protected]>
• Re: AW: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Christopher Baum <[email protected]>
• -which- [was: Re: st: AW: RE: Error ivreg2 ...]
  • From: Nick Cox <[email protected]>
• AW: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Wiebke Meyer <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: Richard Williams <[email protected]>
• st: impose dynamic constraints
  • From: Zhi Su <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: Wu Zhang <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: "Brian P. Poi" <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: Wu Zhang <[email protected]>
• Re: st: gmm with two equations and one parameter
  • From: "Brian P. Poi" <[email protected]>
• Re: st: imposing cross-equation constrains with nlsur
  • From: "Brian P. Poi" <[email protected]>
• st: RE: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: "Steve Rothenberg" <[email protected]>
• st: get expected error terms in multivariate probit model
  • From: Zhi Su <[email protected]>
• st: simluated errors in multivariate probit model
  • From: Zhi Su <[email protected]>
• Re: st: parametric survival analysis - choosing the probability distribution
  • From: Magdalena Kapelko <[email protected]>
• st: calculating latitude and longitude of nearby point
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: SQL problem: ID already defined
  • From: Friedrich Huebler <[email protected]>
• st: gmm with two equations and one parameter
  • From: Wu Zhang <[email protected]>
• Re: st: plot population distribution over sample histogram
  • From: jacques detiege <[email protected]>
• st: imposing cross-equation constrains with nlsur
  • From: ABDUL ADAM <[email protected]>
• st: esttab bootstrap observations
  • From: john sanders <[email protected]>
• Re: st: .dta storage, why is too big?
  • From: Daniel Feenberg <[email protected]>
• st: RE: Extreme data points
  • From: "Sarah Edgington" <[email protected]>
• Re: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Austin Nichols <[email protected]>
• st: wald test, one-sided test not appropriate
  • From: "Scharnigg, Stan (Stud. SBE)" <[email protected]>
• st: .dta storage, why is too big?
  • From: Daniel Marcelino <[email protected]>
• st: prvalue after mlogit with a difference-in-difference strategy
  • From: ANNAMARIA MILAZZO <[email protected]>
• st: RE: tsline: label right y-axis
  • From: "David Radwin" <[email protected]>
• RE: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Importing a variable from another STATA file and an "xtregar" question
  • From: Joerg Luedicke <[email protected]>
• Re: st: Importing a variable from another STATA file and an "xtregar" question
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Importing a variable from another STATA file and an "xtregar" question
  • From: Maarten Buis <[email protected]>
• Re: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Austin Nichols <[email protected]>
• st: Importing a variable from another STATA file and an "xtregar" question
  • From: Jason Hecht <[email protected]>
• Re: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Austin Nichols <[email protected]>
• Fwd: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Jen Zhen <[email protected]>
• RE: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Nick Cox <[email protected]>
• RE: st: Problems with date format
  • From: Nick Cox <[email protected]>
• RE: st: string question
  • From: Nick Cox <[email protected]>
• Re: st: string question
  • From: Thomas <[email protected]>
• Re: st: Local Linear Regression for Regression Discontinuity Designs
  • From: Jen Zhen <[email protected]>
• RE: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Extreme data points
  • From: Maarten Buis <[email protected]>
• Re: st: Problems with date format
  • From: Nick Cox <[email protected]>
• Re: st: Tests for cross sectional dependence when xttest2 doesn't work
  • From: Nick Cox <[email protected]>
• Re: st: Tests for cross sectional dependence when xttest2 doesn't work
  • From: Markus Eberhardt <[email protected]>
• st: Problems with date format
  • From: Morten Støver <[email protected]>
• Re: st: string question
  • From: daniel klein <[email protected]>
• Re: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Nick Cox <[email protected]>
• AW: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Wiebke Meyer <[email protected]>
• st: Tests for cross sectional dependence when xttest2 doesn't work
  • From: [email protected]
• st: Extreme data points
  • From: "Achmed Aldai" <[email protected]>
• Re: st: How to test whether coefficient change between two models significant
  • From: John Antonakis <[email protected]>
• Re: st: How to test whether coefficient change between two models significant
  • From: Maarten Buis <[email protected]>
• st: Treatment of outliers
  • From: "Allan Reese (Cefas)" <[email protected]>
• st: How to test whether coefficient change between two models significant
  • From: Bluesman Wood <[email protected]>
• Re: st: estimates table: xtnbreg
  • From: Muhammad Anees <[email protected]>
• Re: st: getting the range of labels on a graph
  • From: Antoine Terracol <[email protected]>
• Re: st: Elimination of outliers
  • From: Ronan Conroy <[email protected]>
• Re: st: Elimination of outliers
  • From: Ronan Conroy <[email protected]>
• Re: st: Elimination of outliers
  • From: Ronan Conroy <[email protected]>
• Re: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Nick Cox <[email protected]>
• Re: st: estimates table: xtnbreg
  • From: Maarten Buis <[email protected]>
• RE: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: DE SOUZA Eric <[email protected]>
• Re: st: string question
  • From: Nick Cox <[email protected]>
• st: tsline: label right y-axis
  • From: Barbara Engels <[email protected]>
• st: estimates table: xtnbreg
  • From: Muhammad Anees <[email protected]>
• st: RE: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: DE SOUZA Eric <[email protected]>
• Re: st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Nick Cox <[email protected]>
• st: AW: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Wiebke Meyer <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Scaling of variables
  • From: Nick Cox <[email protected]>
• RE: st: Scaling of variables
  • From: Jan Bryla <[email protected]>
• Re: st: string question
  • From: Nick Cox <[email protected]>
• Re: st: Scaling of variables
  • From: Maarten Buis <[email protected]>
• Re: st: Scaling of variables
  • From: "Achmed Aldai" <[email protected]>
• Re: st: Scaling of variables
  • From: Maarten Buis <[email protected]>
• st: string question
  • From: Thomas <[email protected]>
• Re: st: Scaling of variables
  • From: Nick Cox <[email protected]>
• Re: st: Scaling of variables
  • From: "Achmed Aldai" <[email protected]>
• st: getting the range of labels on a graph
  • From: Antoine Terracol <[email protected]>
• Re: st: Scaling of variables
  • From: Maarten Buis <[email protected]>
• Re: st: parametric survival analysis - choosing the probability distribution
  • From: Maarten Buis <[email protected]>
• st: Scaling of variables
  • From: "Achmed Aldai" <[email protected]>
• Re: st: xtabond2 with time-fixed effects
  • From: sanjesh kumar <[email protected]>
• st: proportional hazard assumption in parametric survival models
  • From: Magdalena Kapelko <[email protected]>
• st: parametric survival analysis - choosing the probability distribution
  • From: Magdalena Kapelko <[email protected]>
• Re: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: SQL problem: ID already defined
  • From: Andrew Dyck <[email protected]>
• st: geocode missing tempfile
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• Re: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• Re: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• st: SQL problem: ID already defined
  • From: Friedrich Huebler <[email protected]>
• Re: RE: st: Elimination of outliers
  • From: [email protected]
• Re: st: Rotate labels of ticks in time series graphic
  • From: Barbara Engels <[email protected]>
• RE: st: Rotate labels of ticks in time series graphic
  • From: "David Radwin" <[email protected]>
• Re: st: Rotate labels of ticks in time series graphic
  • From: [email protected]
• st: Rotate labels of ticks in time series graphic
  • From: Barbara Engels <[email protected]>
• RE: RE: st: Elimination of outliers
  • From: Richard Williams <[email protected]>
• Re: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• st: RE: xtabond2 with time-fixed effects
  • From: Nick Cox <[email protected]>
• RE: RE: st: Elimination of outliers
  • From: "Jeff" <[email protected]>
• st: RE: RE: Difficult wide file
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: xtabond2 with time-fixed effects
  • From: Richard Williams <[email protected]>
• st: RE: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: "Schaffer, Mark E" <[email protected]>
• st: xtabond2 with time-fixed effects
  • From: lreine ycenna <[email protected]>
• RE: RE: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• RE: RE: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• Re: RE: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• RE: RE: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: Elimination of outliers
  • From: Austin Nichols <[email protected]>
• Re: RE: st: Elimination of outliers
  • From: "Achmed Aldai" <[email protected]>
• Re: st: output settings "print header" doesn't work
  • From: Alan Riley <[email protected]>
• st: Error ivreg2 "must have ranktest version 01.2.02 or geater..."
  • From: Wiebke <[email protected]>
• RE: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: problem with regexm leading to "regexp: unterminated ()" error for all observations
  • From: Jamie Fagg <[email protected]>
• st: RE: Difficult wide file
  • From: Nick Cox <[email protected]>
• Re: st: Elimination of outliers
  • From: "Achmed Aldai" <[email protected]>
• st: Re: gllamm, gllapred, and marginal effects
  • From: jsw <[email protected]>
• Re: st: RE: Error message with GMM command
  • From: lreine ycenna <[email protected]>
• st: Panel Binary GMM
  • From: [email protected]
• Re: st: RE: Error message with GMM command
  • From: Nick Cox <[email protected]>
• Re: st: Elimination of outliers
  • From: Nick Cox <[email protected]>
• Re: st: RE: Error message with GMM command
  • From: lreine ycenna <[email protected]>
• Re: st: RE: Error message with GMM command
  • From: lreine ycenna <[email protected]>
• Re: st: error r(111)
  • From: Maarten Buis <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• st: Elimination of outliers
  • From: "Achmed Aldai" <[email protected]>
• Re: st: error r(111)
  • From: Chiara Mussida <[email protected]>
• st: RE: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: "Steve Rothenberg" <[email protected]>
• RE: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: Nick Cox <[email protected]>
• RE: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: "P. Lopes-Monteiro" <[email protected]>
• st: RE: Error message with GMM command
  • From: Nick Cox <[email protected]>
• st: error r(111)
  • From: Chiara Mussida <[email protected]>
• st: Error message with GMM command
  • From: lreine ycenna <[email protected]>
• RE: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: "P. Lopes-Monteiro" <[email protected]>
• RE: st: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: Nick Cox <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: daniel klein <[email protected]>
• st: Difficult wide file
  • From: Guy Mole <[email protected]>
• RE: st: IV command in system GMM
  • From: Humaira Asad <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• RE: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: Nick Cox <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• Re: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: "P. Lopes-Monteiro" <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• Re: st: Sala-i-Martin's Extreme Bound Analaysis
  • From: "Justina Fischer" <[email protected]>
• st: Sala-i-Martin's Extreme Bound Analaysis
  • From: pl344 <[email protected]>
• Re: st: retransformation of ln(Y) coefficient and CI in regression
  • From: Roger Newson <[email protected]>
• Re: st: IV command in system GMM
  • From: Nick Cox <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• Re: st: IV command in system GMM
  • From: lreine ycenna <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• st: RE: IV command in system GMM
  • From: DE SOUZA Eric <[email protected]>
• st: Exporting xtsum results: A Querry
  • From: Muhammad Anees <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• Re: st: IV command in system GMM
  • From: Nick Cox <[email protected]>
• st: IV command in system GMM
  • From: lreine ycenna <[email protected]>
• RE: st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: "Cornelius Nattey" <[email protected]>
• Re: st: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: Maarten Buis <[email protected]>
• Re: st: RE: synthetic ZINB
  • From: Muhammad Anees <[email protected]>
• Re: st: RE: synthetic ZINB
  • From: Ari Samaranayaka <[email protected]>
• Re: st: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: Nick Cox <[email protected]>
• Re: st: RE: synthetic ZINB
  • From: Nick Cox <[email protected]>
• st: RE: synthetic ZINB
  • From: [email protected]
• st: RE: synthetic ZINB
  • From: [email protected]
• Re: st: browse in stata 11 - order of variables
  • From: Eric Booth <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: Eric Booth <[email protected]>
• Re: st: RE: HAC SE in high dimensional regression
  • From: Diana Salvia <[email protected]>
• st: on GLLAMM and geqs
  • From: "Liberini, Federica" <[email protected]>
• st: RE: HAC SE in high dimensional regression
  • From: DE SOUZA Eric <[email protected]>
• st: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: "Steve Rothenberg" <[email protected]>
• st: HAC SE in high dimensional regression
  • From: Diana Salvia <[email protected]>
• st: RE: retransformation of ln(Y) coefficient and CI in regression
  • From: Nick Cox <[email protected]>
• st: How to interprete Wooldridge test for autocorrelation in panel data
  • From: Muhammad Anees <[email protected]>
• st: retransformation of ln(Y) coefficient and CI in regression
  • From: "Steve Rothenberg" <[email protected]>
• st: RE: Drop observations in panel data if equal
  • From: Nick Cox <[email protected]>
• Re: st: Get back to original sample data
  • From: Richard Williams <[email protected]>
• st: Drop observations in panel data if equal
  • From: "Diana Beketova" <[email protected]>
• Re: st: Get back to original sample data
  • From: Steven Samuels <[email protected]>
• st: Panel Data and Dummy Variable to measure recovery
  • From: pl344 <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: daniel klein <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: Sergiy Radyakin <[email protected]>
• Re: st: browse in stata 11 - order of variables
  • From: daniel klein <[email protected]>
• st: ML maximize error message
  • From: antonio martuscelli <[email protected]>
• st: browse in stata 11 - order of variables
  • From: "Laura R." <[email protected]>
• Re: st: Get back to original sample data
  • From: Nick Cox <[email protected]>
• st: Get back to original sample data
  • From: "Achmed Aldai" <[email protected]>
• Re: st: coding of factor variables
  • From: Maarten Buis <[email protected]>
• Re: st: longitudinal data
  • From: Nick Cox <[email protected]>
• Re: st: More elegant code . . .?
  • From: Stas Kolenikov <[email protected]>
• Re: st: longitudinal data
  • From: Eric Booth <[email protected]>
• st: longitudinal data
  • From: Tina Hernandez-Boussard <[email protected]>
• Re: st: More elegant code . . .?
  • From: Richard Williams <[email protected]>
• Re: st: More elegant code . . .?
  • From: Eric Booth <[email protected]>
• Re: st: simulating random numbers from zero inflated negative binomial estimates
  • From: Ari Samaranayaka <[email protected]>
• Re: st: More elegant code . . .?
  • From: Eric Booth <[email protected]>
• st: More elegant code . . .?
  • From: Michael Costello <[email protected]>
• Re: st: Contemporaneous correlation in unbalanced panel
  • From: Clive Nicholas <[email protected]>
• Re: st: Contemporaneous correlation in unbalanced panel
  • From: Steve Samuels <[email protected]>
• st: Contemporaneous correlation in unbalanced panel
  • From: "Guha, Mahua" <[email protected]>
• st: coding of factor variables
  • From: "Sun, Yan (IFPRI)" <[email protected]>
• st: output settings "print header" doesn't work
  • From: Dirk Enzmann <[email protected]>
• st: determinant of correlation matrix
  • From: Fabio Zona <[email protected]>
• Re: st: extracting predicted probabilities
  • From: Richard Williams <[email protected]>
• Re: st: Drop observations of groups with 0 as critical value
  • From: Nick Cox <[email protected]>
• st: Drop observations of groups with 0 as critical value
  • From: "Achmed Aldai" <[email protected]>
• st: extracting predicted probabilities
  • From: Michele Savini Zangrandi <[email protected]>
• st: Confusion about predict after -selmlog-
  • From: dan liu <[email protected]>
• Re: st: transformation of variables
  • From: Nick Cox <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: transformation of variables
  • From: Nick Cox <[email protected]>
• st: transformation of variables
  • From: [email protected]
• Re: st: How to get parts of XB matrix
  • From: Austin Nichols <[email protected]>
• RE: st: RE: Saving Inter-item Correlations or Alphas as New Variables
  • From: "Sarah Edgington" <[email protected]>
• Re: st: RE: Saving Inter-item Correlations or Alphas as New Variables
  • From: Justina Kamiel Grayman <[email protected]>
• Re: st: How to get parts of XB matrix
  • From: Austin Nichols <[email protected]>
• st: How to get parts of XB matrix
  • From: Zhi Su <[email protected]>
• Re: st: Constrained Regression in Stata
  • From: Austin Nichols <[email protected]>
• Re: st: Constrained Regression in Stata
  • From: Austin Nichols <[email protected]>
• Re: st: Constrained Regression in Stata
  • From: Steven Samuels <[email protected]>
• st: Replicating -margins,eydx()- with interactions
  • From: Duha Altindag <[email protected]>
• st: update of Ian Watson's -tabout-
  • From: Christopher Baum <[email protected]>
• Re: st: Including constant?
  • From: Daniel Marcelino <[email protected]>
• Re: st: problem with regexm leading to "regexp: unterminated ()" error for all observations
  • From: Phil Schumm <[email protected]>
• [no subject]
  • From: Unknown
• RE: st: Constrained Regression in Stata
  • From: "Tiago V. Pereira" <[email protected]>
• Re: st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: Jose Pacheco <[email protected]>
• st: RE: Series with two different base years
  • From: Nick Cox <[email protected]>
• Re: st: Using Multiple Imputation in a very large dataset
  • From: Raquel Rangel de Meireles Guimarães <[email protected]>
• Re: st: Nlsur quaids and IV
  • From: Ana <[email protected]>
• Re: st: Nlsur quaids and IV
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Using Multiple Imputation in a very large dataset
  • From: Maarten Buis <[email protected]>
• st: Using Multiple Imputation in a very large dataset
  • From: Raquel Rangel de Meireles Guimarães <[email protected]>
• Re: st: Looping or macro needed??? - Followup question
  • From: Sarah Elizabeth Edgington <[email protected]>
• st: Series with two different base years
  • From: Barbara Engels <[email protected]>
• st: Looping or macro needed??? - Followup question
  • From: Jennifer A Hoff <[email protected]>
• Re: st: simulating random numbers from zero inflated negative binomial estimates
  • From: "E. Paul Wileyto" <[email protected]>
• Re: st: Constrained Regression in Stata
  • From: Austin Nichols <[email protected]>
• Re: st: RE: problem with regexm leading to "regexp: unterminated ()" error for all observations
  • From: Steven Samuels <[email protected]>
• Re: st: panel data xtmixed vs xtreg
  • From: Joerg Luedicke <[email protected]>
• RE: st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: "Cornelius Nattey" <[email protected]>
• st: RE: problem with regexm leading to "regexp: unterminated ()" error for all observations
  • From: Nick Cox <[email protected]>
• R: st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: Maarten Buis <[email protected]>
• st: R: RE: R: SKIN PRICK TEST ANALYSIS
  • From: "Carlo Lazzaro" <[email protected]>
• st: Register Now for Introduction to Stata for Medical Statistics Course
  • From: Timberlake Consultants Training <[email protected]>
• st: problem with regexm leading to "regexp: unterminated ()" error for all observations
  • From: Jamie Fagg <[email protected]>
• st: RE: R: SKIN PRICK TEST ANALYSIS
  • From: "Cornelius Nattey" <[email protected]>
• st: R: SKIN PRICK TEST ANALYSIS
  • From: "Carlo Lazzaro" <[email protected]>
• st: RE: Drop observations of groups with gaps in their data
  • From: Nick Cox <[email protected]>
• st: Drop observations of groups with gaps in their data
  • From: Christopher Baum <[email protected]>
• st: SKIN PRICK TEST ANALYSIS
  • From: "Cornelius Nattey" <[email protected]>
• Re: st: -mi- Suite and Robust Standard Errors?
  • From: daniel klein <[email protected]>
• st: Drop observations of groups with gaps in their data
  • From: "Achmed Aldai" <[email protected]>
• Re: st: predict
  • From: Maarten Buis <[email protected]>
• st: Job Posting (Austin, TX)
  • From: Clinton Thompson <[email protected]>
• Re: st: Constrained Regression in Stata
  • From: Nick Cox <[email protected]>
• Re: st: simulating random numbers from zero inflated negative binomial estimates
  • From: Ari Samaranayaka <[email protected]>
• Re: st: reshape WDI from wide to long format
  • From: JP Azevedo <[email protected]>
• Re: st: Nlsur quaids and IV
  • From: Ana <[email protected]>
• st: -mi- Suite and Robust Standard Errors?
  • From: john metcalfe <[email protected]>
• st: Constrained Regression in Stata
  • From: Meg22 <[email protected]>
• Re: st: set constraints for coefficients of independents in regression
  • From: Austin Nichols <[email protected]>
• Re: st: Looping or macro needed???
  • From: Nick Cox <[email protected]>
• Re: st: plot population distribution over sample histogram
  • From: Nick Cox <[email protected]>
• st: Looping or macro needed???
  • From: Jennifer A Hoff <[email protected]>
• st: plot population distribution over sample histogram
  • From: jacques detiege <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• Re: st: set constraints for coefficients of independents in regression
  • From: John Antonakis <[email protected]>
• Re: st: logarithmic graphing problem
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: panel data xtmixed vs xtreg
  • From: yuying shi <[email protected]>
• Re: st: How to model a positive continuous dependent variable with many zeros?
  • From: Steven Samuels <[email protected]>
• Re: st: predict
  • From: Chiara Mussida <[email protected]>
• re: st: set constraints for coefficients of independents in regression
  • From: Christopher Baum <[email protected]>
• Re: st: How to model a positive continuous dependent variable with many zeros?
  • From: Steven Samuels <[email protected]>
• Re: st: How to model a positive continuous dependent variable with many zeros?
  • From: Hitesh Chandwani <[email protected]>
• st: Re: statalist-digest V4 #4171
  • From: Zhi Su <[email protected]>
• Re: st: SMCL {stata args[:txt]}
  • From: "K D Nash" <[email protected]>
• Re: st: simulating random numbers from zero inflated negative binomial estimates
  • From: "E. Paul Wileyto" <[email protected]>
• st: opreg without exit variable
  • From: Tuki <[email protected]>
• Re: st: Including constant?
  • From: Richard Williams <[email protected]>
• Re: st: predict
  • From: Richard Williams <[email protected]>
• Re: st: reshape WDI from wide to long format
  • From: Sami Alameen <[email protected]>
• st: problem with estout
  • From: Tuki <[email protected]>
• st: predict
  • From: Chiara Mussida <[email protected]>
• st: Notation of the Negative Binomial Model
  • From: Francisco Rowe <[email protected]>
• Re: st: panel data xtmixed vs xtreg
  • From: Joerg Luedicke <[email protected]>
• Re: st: logarithmic graphing problem
  • From: Nick Cox <[email protected]>
• Re: st: Generating a variable to indicate whether an array of variables is in increasing value
  • From: Nick Cox <[email protected]>
• Re: st: Generating a variable to indicate whether an array of variables is in increasing value
  • From: Nick Cox <[email protected]>
• st: Ado for determining structure of UK Postcodes
  • From: Jamie Fagg <[email protected]>
• st: Error: r(603) in Stata 11 while appending
  • From: Rasika Raghavan <[email protected]>
• st: Re: problem with levpet command
  • From: Tuki <[email protected]>
• Re: st: set constraints for coefficients of independents in regression
  • From: John Antonakis <[email protected]>
• Re: st: Including constant?
  • From: Nils Braakmann <[email protected]>
• st: Compare rate of change in proportion with time in 2 groups
  • From: Quinn Leigh <[email protected]>
• st: panel data xtmixed vs xtreg
  • From: yuying shi <[email protected]>
• st: Generating a variable to indicate whether an array of variables is in increasing value
  • From: Mike <[email protected]>
• st: set constraints for coefficients of independents in regression
  • From: Zhi Su <[email protected]>
• Re: st: reshape WDI from wide to long format
  • From: JP Azevedo <[email protected]>
• Re: st: mi estimate using gllamm and pweight
  • From: Stas Kolenikov <[email protected]>
• RE: st: mi estimate using gllamm and pweight
  • From: Richard Williams <[email protected]>
• st: RE: Saving Inter-item Correlations or Alphas as New Variables
  • From: "Sarah Edgington" <[email protected]>
• Re: st: problem with levpet command
  • From: "Brian P. Poi" <[email protected]>
• st: Probing Interactions With MI Data
  • From: Justina Kamiel Grayman <[email protected]>
• st: Saving Inter-item Correlations or Alphas as New Variables
  • From: Justina Kamiel Grayman <[email protected]>
• RE: st: mi estimate using gllamm and pweight
  • From: "Wike, Traci" <[email protected]>
• RE: st: mi estimate using gllamm and pweight
  • From: Richard Williams <[email protected]>
• st: simulating random numbers from zero inflated negative binomial estimates
  • From: Ari Samaranayaka <[email protected]>
• st: logarithmic graphing problem
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: mi estimate using gllamm and pweight
  • From: "Wike, Traci" <[email protected]>
• Re: st: Panel Data XTSUM interpretation
  • From: "Mary E. Mackesy-Amiti" <[email protected]>
• Re: st: SMCL {stata args[:txt]}
  • From: Eric Booth <[email protected]>
• Re: st: SMCL {stata args[:txt]}
  • From: Austin Nichols <[email protected]>
• st: SMCL {stata args[:txt]}
  • From: "K D Nash" <[email protected]>
• Re: RE: st: RE: problems with encode
  • From: "Lukas Bösch" <[email protected]>
• st: using estadd margins after logistic
  • From: "Mary E. Mackesy-Amiti" <[email protected]>
• Re: st: RE: RE: RE: Writing the value of a variable in another variable in a selective way
  • From: Nick Cox <[email protected]>
• st: Panel Data XTSUM interpretation
  • From: Panel Count Data <[email protected]>
• RE: st: RE: RE: RE: Writing the value of a variable in another variable in a selective way
  • From: "Mak, Timothy" <[email protected]>
• Re: st: Re: propensity score
  • From: Zeynal Karaca <[email protected]>
• Re: st: Including constant?
  • From: Maarten Buis <[email protected]>
• RE: st: Including constant?
  • From: Nick Cox <[email protected]>
• RE: st: RE: problems with encode
  • From: Nick Cox <[email protected]>
• Re: st: Two stage least square estimation overidentified Sargan test
  • From: Austin Nichols <[email protected]>
• Re: st: Re: propensity score
  • From: "Ariel Linden. DrPH" <[email protected]>
• Re: st: RE: problems with encode
  • From: Maarten Buis <[email protected]>
• Re: st: Including constant?
  • From: Richard Williams <[email protected]>
• st: xi3 with xtreg?
  • From: "Minson, Julia" <[email protected]>
• Re: st: RE: problems with encode
  • From: "Lukas Bösch" <[email protected]>
• Re: st: Issue on sorting on categorical variables
  • From: Nick Cox <[email protected]>
• st: Issue on sorting on categorical variables
  • From: "Grigolon, Laura" <[email protected]>
• st: Shuffling variables in a structured way
  • From: Emile Locque <[email protected]>
• st: Including constant?
  • From: lreine ycenna <[email protected]>
• st: RE: Including constant?
  • From: Nick Cox <[email protected]>
• st: RE: Display the regression equation for the fitted line in Stata scatter plot?
  • From: Nick Cox <[email protected]>
• st: Display the regression equation for the fitted line in Stata scatter plot?
  • From: Jian Zhang <[email protected]>
• RE: st: RE: RE: RE: Writing the value of a variable in another variable in a selective way
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: RE: Writing the value of a variable in another variable in a selective way
  • From: [email protected]
• st: RE: Missing data in mental health research: a practical approach using Stata
  • From: Nick Cox <[email protected]>
• st: Missing data in mental health research: a practical approach using Stata
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: Writing the value of a variable in another variable in a selective way
  • From: Nick Cox <[email protected]>
• st: Two stage least square estimation overidentified Sargan test
  • From: "[email protected]" <[email protected]>
• st: RE: problems with encode
  • From: Nick Cox <[email protected]>
• st: problems with encode
  • From: "Lukas Bösch" <[email protected]>
• st: problems with encode
  • From: "Lukas Bösch" <[email protected]>
• Re: st:glm with bin family and link probit VS. probit
  • From: Judy You <[email protected]>
• Re: st: How to model a positive continuous dependent variable with many zeros?
  • From: Adriaan Hoogendoorn <[email protected]>