Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• Re: st: ML Max Non-Linear
  • From: Steven Archambault <[email protected]>
• Re: st: Tracking Replacements Made to Variables
  • From: Eric Booth <[email protected]>
• st: Table from loop
  • From: Sergio Prada <[email protected]>
• Re: st: Testing for panel-level heteroskedasticity with xtgls
  • From: Clive Nicholas <[email protected]>
• re:Re: st: Filtering methods with short time series
  • From: Christopher Baum <[email protected]>
• Re: st: Tracking Replacements Made to Variables
  • From: Daniel Feenberg <[email protected]>
• Re: st: conditional probabilities after biprobit
  • From: george joseph <[email protected]>
• Re: st: Breaks in ordered probit model
  • From: Maarten buis <[email protected]>
• st: Tracking Replacements Made to Variables
  • From: Christopher Lanoue <[email protected]>
• Re: st: Filtering methods with short time series
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: generating Latex Odds ratio and CI table using esttab
  • From: ann montgomery <[email protected]>
• st: From: ann montgomery <[email protected]>
  • From: [email protected]
• st: Filtering methods with short time series
  • From: kokootchke <[email protected]>
• st: State space representation of ARIMA model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: R: Re: choice of ANOVA for an ecological experiment
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: Sample selection correction models with fixed-effects
  • From: Ivy Kodzi <[email protected]>
• st: Breaks in ordered probit model
  • From: Erik Berwart <[email protected]>
• re: st: choice of ANOVA for an ecological experiment
  • From: "Airey, David C" <[email protected]>
• st: Re: choice of ANOVA for an ecological experiment
  • From: Jacob Felson <[email protected]>
• Re: st: Sample selection correction models with fixed-effects
  • From: Austin Nichols <[email protected]>
• Re: st: conditional probabilities after biprobit
  • From: Austin Nichols <[email protected]>
• Re: re:RE: st: unconditional fixed effect logit
  • From: Austin Nichols <[email protected]>
• RE: st: ICD9 to ICD10 converter utility?
  • From: "Harry Comber" <[email protected]>
• st: Gray's test. R results in Stata ouput.
  • From: Allen Buxton <[email protected]>
• RE: re:RE: st: unconditional fixed effect logit
  • From: Maarten buis <[email protected]>
• st: conditional probabilities after biprobit
  • From: george joseph <[email protected]>
• RE: re:RE: st: unconditional fixed effect logit
  • From: "Noh, Grimm" <[email protected]>
• re: st: choice of ANOVA for an ecological experiment
  • From: "Airey, David C" <[email protected]>
• Re: st: Sample selection correction models with fixed-effects
  • From: Steven Samuels <[email protected]>
• Re: st: Sample selection correction models with fixed-effects
  • From: george joseph <[email protected]>
• st: Spline Garch Model
  • From: Gabriel Nicolás Michelena <[email protected]>
• st: Sample selection correction models with fixed-effects
  • From: Ivy Kodzi <[email protected]>
• st: Cnreg with fixed effect
  • From: Milet Emmanuel <[email protected]>
• st: RE: Changes to two way clustering ivreg2 update
  • From: "Schaffer, Mark E" <[email protected]>
• st: Multilevel modelling: questions about independence, residuals, balance
  • From: Owen Corrigan <[email protected]>
• Re: st: Changes to two way clustering ivreg2 update
  • From: Christopher Baum <[email protected]>
• Re: st: tabdisp doesn't show complete number
  • From: Carsten Sauer <[email protected]>
• st: tabdisp doesn't show complete number
  • From: HARRASSER Alois <[email protected]>
• Re: st: FW: Marginal effects for the two-part model
  • From: Maarten buis <[email protected]>
• RE: re:RE: st: unconditional fixed effect logit
  • From: Maarten buis <[email protected]>
• st: FW: Marginal effects for the two-part model
  • From: "Michael Palmer" <[email protected]>
• Re: st: ML Max Non-Linear
  • From: Maarten buis <[email protected]>
• st: R: choice of ANOVA for an ecological experiment
  • From: "Carlo Lazzaro" <[email protected]>
• st: Testing for panel-level heteroskedasticity with xtgls
  • From: [email protected]
• st: ML Max Non-Linear
  • From: Steven Archambault <[email protected]>
• st: Changes to two way clustering ivreg2 update
  • From: Samuel Bazzi <[email protected]>
• re:RE: re:RE: st: unconditional fixed effect logit
  • From: Christopher Baum <[email protected]>
• st: choice of ANOVA for an ecological experiment
  • From: Jacob Felson <[email protected]>
• RE: re:RE: st: unconditional fixed effect logit
  • From: "Noh, Grimm" <[email protected]>
• re:RE: st: unconditional fixed effect logit
  • From: Christopher Baum <[email protected]>
• st: re: ivreg2* updates
  • From: Christopher Baum <[email protected]>
• RE: st: unconditional fixed effect logit
  • From: "Noh, Grimm" <[email protected]>
• st: RE: ivreg2* updates
  • From: DE SOUZA Eric <[email protected]>
• st: ivreg2* updates
  • From: Christopher Baum <[email protected]>
• re: st: unconditional fixed effect logit
  • From: Kit Baum <[email protected]>
• st: unconditional fixed effect logit
  • From: "Noh, Grimm" <[email protected]>
• Re: st: r(909) error with win7
  • From: Maarten buis <[email protected]>
• st: r(909) error with win7
  • From: PINAR ERDEM <[email protected]>
• Re: st: ICD9 to ICD10 converter utility?
  • From: Kaleb Michaud <[email protected]>
• Antwort: Re: Re: st: Re: Lagged price
  • From: Justina Fischer <[email protected]>
• Re: st: Correcting for self selection
  • From: Alistair Windsor <[email protected]>
• Antwort: Re: st: Re: Lagged price
  • From: Justina Fischer <[email protected]>
• Re: Re: st: Re: Lagged price
  • From: Nick Cox <[email protected]>
• Antwort: Re: st: Re: Lagged price
  • From: Justina Fischer <[email protected]>
• Re: st: Correcting for self selection
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: Re: Lagged price
  • From: Nick Cox <[email protected]>
• Antwort: Re: st: Re: Lagged price
  • From: Justina Fischer <[email protected]>
• RE: Re: st: Correcting for self selection
  • From: [email protected]
• Re: st: Re: Lagged price
  • From: Beatrice Crozza <[email protected]>
• Re: st: Correcting for self selection
  • From: "Clyde Schechter" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Nick Winter <[email protected]>
• Re: st: Re: Lagged price
  • From: Nick Cox <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Sergiy Radyakin <[email protected]>
• Re: st: -svy: mean- with more than 400 subpopulations
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: -svy: mean- with more than 400 subpopulations
  • From: Steven Samuels <[email protected]>
• st: -svy: mean- with more than 400 subpopulations
  • From: Julian Reif <[email protected]>
• st: Re: Lagged price
  • From: "Brad Wright" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Steven Samuels <[email protected]>
• st: Lagged price
  • From: Beatrice Crozza <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: "Mason, Bryce" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Nick Winter <[email protected]>
• RE: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Hartman, Rob" <[email protected]>
• RE: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Steven Samuels <[email protected]>
• Re: st: Re: group classification
  • From: Eric Booth <[email protected]>
• Re: st: editing of a variable content in stata
  • From: "Michael N. Mitchell" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Daniel Feenberg <[email protected]>
• st: editing of a variable content in stata
  • From: [email protected]
• Re: st: RE: Critique on comment syntax and suggestions
  • From: "Mason, Bryce" <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Critique on comment syntax and suggestions
  • From: Nick Cox <[email protected]>
• st: RE: Critique on comment syntax and suggestions
  • From: "David Radwin" <[email protected]>
• st: Critique on comment syntax and suggestions
  • From: "Mason, Bryce" <[email protected]>
• Re: st: combining multiple surveys - adjustment of weights
  • From: Steven Samuels <[email protected]>
• RE: st: creating new variables
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: combining multiple surveys - adjustment of weights
  • From: Steven Samuels <[email protected]>
• Re: st: combining multiple surveys - adjustment of weights
  • From: Steven Samuels <[email protected]>
• RE: st: Beta distribution
  • From: "Hartman, Rob" <[email protected]>
• RES: st: changing from 32 to 64 bits
  • From: José Maria Pacheco de Souza <[email protected]>
• Re: st: changing from 32 to 64 bits
  • From: Daniel Feenberg <[email protected]>
• st: New version of -factmerg- on SSC
  • From: Roger Newson <[email protected]>
• st: New version of -factext- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: RE: selectvars and factor variables
  • From: Nick Cox <[email protected]>
• st: update proprcspline available from SSC
  • From: Maarten buis <[email protected]>
• Re: st: Correcting for self selection
  • From: Maarten buis <[email protected]>
• Re: st: class member function not found - error occurs without obvious pattern
  • From: Maarten buis <[email protected]>
• Re: st: Beta distribution
  • From: Maarten buis <[email protected]>
• st: Correcting for self selection
  • From: [email protected]
• st: class member function not found - error occurs without obvious pattern
  • From: [email protected]
• Re: st: Re: AIC and BIC values after ARIMA estimation
  • From: Robert A Yaffee <[email protected]>
• Re: st: changing from 32 to 64 bits
  • From: Robert A Yaffee <[email protected]>
• st: combining multiple surveys - adjustment of weights
  • From: Dana Shills <[email protected]>
• Re: st: Beta distribution
  • From: Robert A Yaffee <[email protected]>
• Re: st: Beta distribution
  • From: Robert A Yaffee <[email protected]>
• Re: st: Murphy and Topel correction and cluster adjustment
  • From: Stas Kolenikov <[email protected]>
• Re: st: Beta distribution
  • From: Stas Kolenikov <[email protected]>
• st: Troubles with shp2dta
  • From: Dorothy Bridges <[email protected]>
• st: Beta distribution
  • From: "Hartman, Rob" <[email protected]>
• st: Murphy and Topel correction and cluster adjustment
  • From: Hongping Tan <[email protected]>
• re: st: creating new variables
  • From: "Airey, David C" <[email protected]>
• Re: st: RE: Random sorting
  • From: Laurie Molina <[email protected]>
• st: creating new variables
  • From: Debs Majumdar <[email protected]>
• st: RE: Random sorting
  • From: "David Radwin" <[email protected]>
• st: RE: Random sorting
  • From: "Sarah Edgington" <[email protected]>
• st: Random sorting
  • From: Laurie Molina <[email protected]>
• st: Re: group classification
  • From: Jurgen Sidgman <[email protected]>
• Antwort: st: Heckprob error: outcome = y_select > 0 predicts data perfectly
  • From: Justina Fischer <[email protected]>
• Re: st: sampling query
  • From: Richard Goldstein <[email protected]>
• Re: st: sampling query
  • From: Steven Samuels <[email protected]>
• AW: st: RE: on restructuring of panel datasets
  • From: [email protected]
• Re: st: Q1, Median & Q3 for pweighted svy data.
  • From: Steven Samuels <[email protected]>
• RE: st: RE: on restructuring of panel datasets
  • From: Nick Cox <[email protected]>
• st: Heckprob error: outcome = y_select > 0 predicts data perfectly
  • From: Dave Francis <[email protected]>
• Re: st: sampling query
  • From: Richard Goldstein <[email protected]>
• st: RE: on restructuring of panel datasets
  • From: Nick Cox <[email protected]>
• Re: st: Q1, Median & Q3 for pweighted svy data.
  • From: Roger Newson <[email protected]>
• st: changing from 32 to 64 bits
  • From: José Maria Pacheco de Souza <[email protected]>
• st: on restructuring of panel datasets
  • From: [email protected]
• st: Q1, Median & Q3 for pweighted svy data.
  • From: Michael Costello <[email protected]>
• Re: st: sampling query
  • From: Stas Kolenikov <[email protected]>
• Re: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: Nick Cox <[email protected]>
• RE: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Hartman, Rob" <[email protected]>
• st: Re: AIC and BIC values after ARIMA estimation
  • From: Alejandro Mosiño <[email protected]>
• Re: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Airey, David C" <[email protected]>
• RE: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Hartman, Rob" <[email protected]>
• Re: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: Nick Cox <[email protected]>
• Re: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Airey, David C" <[email protected]>
• RE: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Hartman, Rob" <[email protected]>
• Re: st: RE: graphing lines
  • From: Nick Cox <[email protected]>
• Re: st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: Nick Cox <[email protected]>
• st: sampling query
  • From: Richard Goldstein <[email protected]>
• st: Bootstrapped Paired-Samples (Dependent) T-Test
  • From: "Hartman, Rob" <[email protected]>
• RE: st: RE: graphing lines
  • From: "Lim, Raymond" <[email protected]>
• Re: st: AIC and BIC values after ARIMA estimation
  • From: Maarten buis <[email protected]>
• Re: st: Date from Intial visit
  • From: Steven Samuels <[email protected]>
• Re: st: Date from Intial visit
  • From: Sergiy Radyakin <[email protected]>
• Re: st: twoway line with mean and quartiles
  • From: Nick Cox <[email protected]>
• st: twoway line with mean and quartiles
  • From: Morten Støver <[email protected]>
• Re: st: line in front of sequenceindexplot
  • From: Ulrich Kohler <[email protected]>
• st: line in front of sequenceindexplot
  • From: Sonja Bastin <[email protected]>
• st: AIC and BIC values after ARIMA estimation
  • From: Alejandro Mosiño <[email protected]>
• Re: st: Colours for variable names in Stata
  • From: Nick Cox <[email protected]>
• st: Colours for variable names in Stata
  • From: Sid Marera <[email protected]>
• st: how to get the dynamic multiplier for Kalman Filter after sspace
  • From: Edinaldo Tebaldi <[email protected]>
• Re: st: group classification
  • From: Eric Booth <[email protected]>
• Re: st: group classification
  • From: "Ellen Kisker" <[email protected]>
• st: group classification
  • From: Jurgen Sidgman <[email protected]>
• Re: st: RE: graphing lines
  • From: Steven Samuels <[email protected]>
• Re: st: extracting portions of a string variable using observations from another variable
  • From: Daniel Henriksen <[email protected]>
• Re: st: RE: graphing lines
  • From: Scott Merryman <[email protected]>
• st: RE: graphing lines
  • From: Nick Cox <[email protected]>
• st: graphing lines
  • From: "Lim, Raymond" <[email protected]>
• st: RE: Restructuring of data
  • From: Nick Cox <[email protected]>
• st: RE: Date from Intial visit
  • From: Nick Cox <[email protected]>
• st: Restructuring of data
  • From: Mats Martinell <[email protected]>
• st: Date from Intial visit
  • From: "Clinton D. Bullock, RPH, NCPS, CDR, USPHS" <[email protected]>
• Re: st: Time between 2 dates
  • From: Laurie Molina <[email protected]>
• RE: st: Herfindahl, segregation index
  • From: Nick Cox <[email protected]>
• Re: st: Herfindahl, segregation index
  • From: Austin Nichols <[email protected]>
• RE: st: Herfindahl, segregation index
  • From: Nick Cox <[email protected]>
• RE: st: Time between 2 dates
  • From: Nick Cox <[email protected]>
• RE: st: Herfindahl, segregation index
  • From: Nick Cox <[email protected]>
• Re: st: Time between 2 dates
  • From: David Kantor <[email protected]>
• st: Time between 2 dates
  • From: Laurie Molina <[email protected]>
• RE: st: Herfindahl, segregation index
  • From: Nick Cox <[email protected]>
• RE: st: RE: RE: RE: RE: comparing yearly surveys (graphs)
  • From: Lucie Vlach <[email protected]>
• Re: st: Herfindahl, segregation index
  • From: Austin Nichols <[email protected]>
• RE: st: RE: selectvars and factor variables
  • From: Nick Cox <[email protected]>
• Re: st: extracting portions of a string variable using observations from another variable
  • From: Eric Booth <[email protected]>
• st: RE: Herfindahl, segregation index
  • From: Nick Cox <[email protected]>
• Re: st: Herfindahl, segregation index
  • From: Austin Nichols <[email protected]>
• Re: st: extracting portions of a string variable using observations from another variable
  • From: Steven Samuels <[email protected]>
• Re: st: Loops in Mata
  • From: [email protected] (William Gould, StataCorp LP)
• st: RE: Fw: reverse causality and sample size
  • From: "Millimet, Daniel" <[email protected]>
• Re: st: odbc connectivity
  • From: Abhimanyu Arora <[email protected]>
• Re: st: extracting portions of a string variable using observations from another variable
  • From: Daniel Henriksen <[email protected]>
• st: Herfindahl, segregation index
  • From: "Tomeka Davis" <[email protected]>
• Re: st: RE: selectvars and factor variables
  • From: A Loumiotis <[email protected]>
• Re: st: Good spatial manual
  • From: Gordon Hughes <[email protected]>
• Re: st: logit or probit : why one row is missing S.E., z-score, and confidence interval??
  • From: Richard Williams <[email protected]>
• st: -groups- updated on SSC [was: ... tabulate the reversed data]
  • From: Nick Cox <[email protected]>
• st: RE: selectvars and factor variables
  • From: Nick Cox <[email protected]>
• Re: st: selectvars and factor variables
  • From: Maarten buis <[email protected]>
• st: selectvars and factor variables
  • From: A Loumiotis <[email protected]>
• st: Fw: reverse causality and sample size
  • From: Maarten buis <[email protected]>
• st: RE: logit or probit : why one row is missing S.E., z-score, and confidence interval??
  • From: Nick Cox <[email protected]>
• st: RE: Destringing alphanumeric string variables
  • From: Nick Cox <[email protected]>
• Re: st: odbc connectivity
  • From: Abhimanyu Arora <[email protected]>
• AW: Re: AW: st: Creating local from levelsof exceeding 255 characters
  • From: "Palan, Stefan ([email protected])" <[email protected]>
• Re: st: Loops in Mata
  • From: Nick Cox <[email protected]>
• Re: st: Loops in Mata
  • From: Nick Cox <[email protected]>
• st: Loops in Mata
  • From: gsborker <[email protected]>
• st: Project user written
  • From: Alberto R Osella <[email protected]>
• Re: st: logit or probit : why one row is missing S.E., z-score, and confidence interval??
  • From: "Michael N. Mitchell" <[email protected]>
• st: Statalist-digest
  • From: Mats Martinell <[email protected]>
• st: logit or probit : why one row is missing S.E., z-score, and confidence interval??
  • From: "Hong, Sounman" <[email protected]>
• st: Destringing alphanumeric string variables
  • From: Andrew Dyck <[email protected]>
• RE: st: r(610)
  • From: Nick Cox <[email protected]>
• RE: st: r(610)
  • From: "POPE, REBECCA" <[email protected]>
• RE: st: r(610)
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: Destringing alphanumeric string variables
  • From: Austin Nichols <[email protected]>
• Re: st: Good spatial manual
  • From: Austin Nichols <[email protected]>
• Re: st: Good spatial manual
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Date: Tue, 25 Jan 2011 17:37:37 +0000
  • From: Maarten buis <[email protected]>
• st: Good spatial manual
  • From: Dmitriy Krichevskiy <[email protected]>
• st: Destringing alphanumeric string variables
  • From: Dmitriy Krichevskiy <[email protected]>
• st: Date: Tue, 25 Jan 2011 17:37:37 +0000
  • From: alfredo jimenez palmero <[email protected]>
• Re: st: Project user-written
  • From: Robert Picard <[email protected]>
• RE: st: r(610)
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: r(610)
  • From: Nick Cox <[email protected]>
• RE: st: r(610)
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: Can we use the standard binary choice model?
  • From: Steven Samuels <[email protected]>
• Re: st: Can we use the standard binary choice model?
  • From: Steven Samuels <[email protected]>
• Re: st: [ml tolerance (originally)]
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: r(610)
  • From: Sergiy Radyakin <[email protected]>
• Re: st: r(610)
  • From: Neil Shephard <[email protected]>
• Re: st: r(610)
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: Project user-written
  • From: Neil Shephard <[email protected]>
• Re: st: Project user-written
  • From: Jeph Herrin <[email protected]>
• Re: st: Project user-written
  • From: Nick Cox <[email protected]>
• Re: st: r(610)
  • From: Aggie Chidlow <[email protected]>
• Re: st: r(610)
  • From: Nick Cox <[email protected]>
• Re: st: r(610)
  • From: Neil Shephard <[email protected]>
• st: Project user-written
  • From: Alberto R Osella <[email protected]>
• Re: st: r(610)
  • From: Aggie Chidlow <[email protected]>
• RE: st: Multiple graph with stcompet
  • From: gambaaz garnaal <[email protected]>
• Re: st: RE: Retrieving random effect estimates
  • From: Mark McCann <[email protected]>
• Re: st: Sequence index plots, subpopuations
  • From: Sonja Bastin <[email protected]>
• Re: st: r(610)
  • From: Nick Cox <[email protected]>
• Re: st: matrix operators that return matrices not allowed in this context
  • From: Nick Cox <[email protected]>
• st: r(610)
  • From: Aggie Chidlow <[email protected]>
• Re: st: RE: RE: RE: RE: comparing yearly surveys (graphs)
  • From: Nick Cox <[email protected]>
• Re: st: AW: predict residuals in Stata 10
  • From: Marco Buur <[email protected]>
• Re: st: extracting portions of a string variable using observations from another variable
  • From: Eric Booth <[email protected]>
• st: matrix operators that return matrices not allowed in this context
  • From: Joe Case Orsini <[email protected]>
• st: varlist not allowed error when using xtgee with many interaction terms
  • From: Jordan H <[email protected]>
• Re: st: odbc connectivity
  • From: Sergiy Radyakin <[email protected]>
• RE: st:
  • From: "Gregory, Christian" <[email protected]>
• RE: st: round command
  • From: keeler james <[email protected]>
• st: round command
  • From: keeler james <[email protected]>
• st: extracting portions of a string variable using observations from another variable
  • From: Daniel Henriksen <[email protected]>
• st: Mahalanobis distance
  • From: Laurie Molina <[email protected]>
• RE: st: RE: RE: Use 'tab' function to tabulate the reversed data
  • From: keeler james <[email protected]>
• st: RE: RE: RE: RE: comparing yearly surveys (graphs)
  • From: Lucie Vlach <[email protected]>
• Re: st: RE: forval predict values into same column
  • From: Michael Bondegård <[email protected]>
• st: RE: forval predict values into same column
  • From: "Jesper Lindhardsen" <[email protected]>
• st: RE: RE: forval predict values into same column
  • From: Nick Cox <[email protected]>
• Re: st:
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• st: RE: forval predict values into same column
  • From: Nick Cox <[email protected]>
• Re: st: model equation multilevel xtmixed
  • From: Leslie Roche <[email protected]>
• st: RE: RE: RE: comparing yearly surveys (graphs)
  • From: Nick Cox <[email protected]>
• st: forval predict values into same column
  • From: Michael Bondegård <[email protected]>
• RE: st: RE: Use 'tab' function to tabulate the reversed data
  • From: keeler james <[email protected]>
• st: RE: RE: Use 'tab' function to tabulate the reversed data
  • From: Nick Cox <[email protected]>
• st: RE: Use 'tab' function to tabulate the reversed data
  • From: Nick Cox <[email protected]>
• st: RE: RE: comparing yearly surveys (graphs)
  • From: Lucie Vlach <[email protected]>
• st: Use 'tab' function to tabulate the reversed data
  • From: keeler james <[email protected]>
• st: RE: comparing yearly surveys (graphs)
  • From: Nick Cox <[email protected]>
• st: comparing yearly surveys (graphs)
  • From: Lucie Vlach <[email protected]>
• st: RE: new var from an old one if a third var has a certain value
  • From: Nick Cox <[email protected]>
• re:st: new var from an old one if a third var has a certain value
  • From: Christopher F Baum <[email protected]>
• st: new var from an old one if a third var has a certain value
  • From: Caterina Astarita <[email protected]>
• Re: st: ml tolerance
  • From: Klaus Pforr <[email protected]>
• Re: st: RE: Retrieving random effect estimates
  • From: Maarten buis <[email protected]>
• st: RE: Retrieving random effect estimates
  • From: Mark McCann <[email protected]>
• st: ml tolerance
  • From: "Gregory, Christian" <[email protected]>
• Re: st: micombine versus mim
  • From: Anders Alexandersson <[email protected]>
• RE: st: Can we use the standard binary choice model?
  • From: Nick Cox <[email protected]>
• Re: st: Can we use the standard binary choice model?
  • From: Maarten buis <[email protected]>
• Re: st: Can we use the standard binary choice model?
  • From: Quang Nguyen <[email protected]>
• st: confidence interval bands of linear predictions
  • From: Giovanni Abbiati <[email protected]>
• st: RE: Retrieving random effect estimates
  • From: Nick Cox <[email protected]>
• st: Retrieving random effect estimates
  • From: Mark McCann <[email protected]>
• st: design issue with suspect endogeneity
  • From: "[email protected]" <[email protected]>
• RE: st: Can we use the standard binary choice model?
  • From: Nick Cox <[email protected]>
• Re: st: unbalanced panel with xtabond
  • From: Johan Hellstrom <[email protected]>
• Re: st: Can we use the standard binary choice model?
  • From: Maarten buis <[email protected]>
• st: RE: RE: RE: RE: scatter options in -ciplot-
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: scatter options in -ciplot-
  • From: "Trelle Sven" <[email protected]>
• st: RE: RE: scatter options in -ciplot-
  • From: Nick Cox <[email protected]>
• st: RE: scatter options in -ciplot-
  • From: Nick Cox <[email protected]>
• st: scatter options in -ciplot-
  • From: "Trelle Sven" <[email protected]>
• Re: st: odbc connectivity
  • From: Neil Shephard <[email protected]>
• st: Can we use the standard binary choice model?
  • From: Quang Nguyen <[email protected]>
• Re: st: Sequence index plots, subpopuations
  • From: Ulrich Kohler <[email protected]>
• st: model equation multilevel xtmixed
  • From: Hanna Lomander <[email protected]>
• Re: st: Sequence index plots, subpopuations
  • From: Ulrich Kohler <[email protected]>
• Re: st: Sequence index plots, subpopuations
  • From: Jörg Eulenberger <[email protected]>
• Re: st: Area under the ROC curve less than 0.5?
  • From: Roger Newson <[email protected]>
• Re: st: Sequence index plots, subpopuations
  • From: Nick Cox <[email protected]>
• st: Sequence index plots, subpopuations
  • From: Sonja Bastin <[email protected]>
• st: odbc connectivity
  • From: Abhimanyu Arora <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: "Ada Ma" <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: "Ada Ma" <[email protected]>
• RE: st: Panel Data and model specification
  • From: Jan Bryla <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Grethe Søndergaard <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Area under the ROC curve less than 0.5?
  • From: <[email protected]>
• re: st: FW: Joint significance question
  • From: "Airey, David C" <[email protected]>
• Re: st: -nlcom-, delta method, and the derivative
  • From: Kristian Karlson <[email protected]>
• Re: st: -nlcom-, delta method, and the derivative
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• Re: st: interaction graph
  • From: Nick Cox <[email protected]>
• st: -nlcom-, delta method, and the derivative
  • From: Kristian Karlson <[email protected]>
• Re: st: Wald test of coefficient equality
  • From: Steven Samuels <[email protected]>
• RE: st: Strange -robust- results with a dummy variable
  • From: "Liu Yu" <[email protected]>
• Re: st: interaction graph
  • From: Fabio Zona <[email protected]>
• Re: st: interaction graph
  • From: Nick Cox <[email protected]>
• Re: st: ICD9 to ICD10 converter utility?
  • From: Jeanne Sears <[email protected]>
• RE: st: ICD9 to ICD10 converter utility?
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: ICD9 to ICD10 converter utility?
  • From: roland andersson <[email protected]>
• st: FW: Joint significance question
  • From: Saudamini Dabak <[email protected]>
• st: interaction graph
  • From: Fabio Zona <[email protected]>
• st: micombine versus mim
  • From: Elisabetta Petracci <[email protected]>
• RE: st: RE: Unbalancing a panel data set with country pairs
  • From: Matei Frunzetti <[email protected]>
• RE: st: RE: Unbalancing a panel data set with country pairs
  • From: Matei Frunzetti <[email protected]>
• Re: st: Unbalancing a panel data set with country pairs
  • From: Gordon Hughes <[email protected]>
• Re: st: Strange -robust- results with a dummy variable
  • From: "Michael N. Mitchell" <[email protected]>
• st: VAR FORECAST
  • From: michael Agu <[email protected]>
• Re: st: creating a new variable
  • From: Gary Longton <[email protected]>
• Re: Re: st: Predicted events with -xtnbreg- and -xtpoisson-
  • From: Dendy Macaulay <[email protected]>
• st: Strange -robust- results with a dummy variable
  • From: "Liu Yu" <[email protected]>
• st: xtabond2 and postdetermined regressors
  • From: James Shaw <[email protected]>
• Re: st: within estimator as "phyrric-victory" in corporate finance?
  • From: Erasmo Giambona <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Steven Samuels <[email protected]>
• st: standard errors for varience components on a second order polynomial using 3 observations
  • From: "Mustillo, Thomas J" <[email protected]>
• Re: st: Predicted events with -xtnbreg- and -xtpoisson-
  • From: Austin Nichols <[email protected]>
• Re: st: Inverse Mills Ratio after xtprobit
  • From: Austin Nichols <[email protected]>
• st: RE: s: ICD9 to ICD10 converter utility?
  • From: "POPE, REBECCA" <[email protected]>
• RE: st: ICD9 to ICD10 converter utility?
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: Panel Data and model specification
  • From: Chris Hajzler <[email protected]>
• st: Panel Data and model specification
  • From: maaaa saaaaa <[email protected]>
• RE: st: RE: Unbalancing a panel data set with country pairs
  • From: Nick Cox <[email protected]>
• RE: st: Multiple graph with stcompet
  • From: Nick Cox <[email protected]>
• st: RE: Sorting matrix on a column
  • From: Nick Cox <[email protected]>
• st: s: ICD9 to ICD10 converter utility?
  • From: "Harry Comber" <[email protected]>
• Re: st: ci's while adjusting for response rate
  • From: Austin Nichols <[email protected]>
• Re: st: ICD9 to ICD10 converter utility?
  • From: Neil Shephard <[email protected]>
• st: creating a new variable
  • From: "King, Carina" <[email protected]>
• st: Wald test of coefficient equality
  • From: Ari Dothan <[email protected]>
• st: Sorting matrix on a column
  • From: Bert Jung <[email protected]>
• Re: st: Where to update genhw
  • From: Neil Shephard <[email protected]>
• st: Where to update genhw
  • From: BAIJER Jan 212040 <[email protected]>
• st: ci's while adjusting for response rate
  • From: [email protected]
• st: ICD9 to ICD10 converter utility?
  • From: roland andersson <[email protected]>
• st: design issue
  • From: "[email protected]" <[email protected]>
• Re: st: Multiple graph with stcompet
  • From: Phil Clayton <[email protected]>
• st: Inverse Mills Ratio after xtprobit
  • From: Ari Dothan <[email protected]>
• Antwort: Re: Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: Justina Fischer <[email protected]>
• Re: st: RE: Unbalancing a panel data set with country pairs
  • From: Matei Frunzetti <[email protected]>
• Re: st: Area under the ROC curve less than 0.5?
  • From: Roger Newson <[email protected]>
• st: RE: Unbalancing a panel data set with country pairs
  • From: Nick Cox <[email protected]>
• st: Unbalancing a panel data set with country pairs
  • From: Matei Frunzetti <[email protected]>
• st: update and new package on SSC: -njc_stuff- and -roman-
  • From: Nick Cox <[email protected]>
• [no subject]
  • From: Unknown
• RE: st: xml_tab with interactions
  • From: "Ben Hoen" <[email protected]>
• Re: [SPAM] st: xml_tab with interactions
  • From: "Dr. Bartus" <[email protected]>
• st: RE: xml_tab with interactions
  • From: Nick Cox <[email protected]>
• st: Multiple graph with stcompet
  • From: gambaaz garnaal <[email protected]>
• st: problem with print and translate
  • From: Matthijs De Zwaan <[email protected]>
• Re: Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: Christopher Baum <[email protected]>
• Re: st: within estimator as "phyrric-victory" in corporate finance?
  • From: Christopher Baum <[email protected]>
• st: xml_tab with interactions
  • From: "Ben Hoen" <[email protected]>
• Re: st: Calculate "running" standard deviation
  • From: Christopher Baum <[email protected]>
• st: Area under the ROC curve less than 0.5?
  • From: <[email protected]>
• RE: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: "Roman Kasal" <[email protected]>
• Antwort: RE: Antwort: Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: Justina Fischer <[email protected]>
• st: Mixed logistic model with autocorrelation
  • From: Leslie Roche <[email protected]>
• Re: st: Keeping the upper triangle of a matrix.
  • From: Mitch Abdon <[email protected]>
• RE: Antwort: Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: "Schaffer, Mark E" <[email protected]>
• st: Predicted events with -xtnbreg- and -xtpoisson-
  • From: Dendy Macaulay <[email protected]>
• Antwort: Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: Justina Fischer <[email protected]>
• Re: st: RE: Vertical to Horizontal??
  • From: Gary Longton <[email protected]>
• st: unbalanced panel with xtabond
  • From: Caterina Astarita <[email protected]>
• st: RE: Vertical to Horizontal??
  • From: martine etienne <[email protected]>
• st: RE: question test of proportions
  • From: "Visintainer, Paul" <[email protected]>
• st: RE: RE: within estimator as "phyrric-victory" in corporate finance?
  • From: "Millimet, Daniel" <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Steven Samuels <[email protected]>
• Re: st: wald test when I use GMM method in stata 11
  • From: Song Nhac <[email protected]>
• Re: st: RE: Keeping the upper triangle of a matrix.
  • From: Philipp Krueger <[email protected]>
• RE: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• Re: st: wald test when I use GMM method in stata 11
  • From: Austin Nichols <[email protected]>
• st: RE: Keeping the upper triangle of a matrix.
  • From: Nick Cox <[email protected]>
• st: Keeping the upper triangle of a matrix.
  • From: Philipp Krueger <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles in batch mode?
  • From: [email protected] (William Gould, StataCorp LP)
• Re: st: Calculate "running" standard deviation
  • From: Austin Nichols <[email protected]>
• Re: st: How to cluster in 2 x 2 tabulation
  • From: Bo MacInnis <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Austin Nichols <[email protected]>
• Re: st: RE: Use fixed-effects' coefficients in a second regression
  • From: Austin Nichols <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• Re: st: combining two variables of different type
  • From: Nick Cox <[email protected]>
• Re: st: operations with multiple conditions
  • From: Nick Cox <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Ada Ma <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Ada Ma <[email protected]>
• st: combining two variables of different type
  • From: "Kristen Shorette" <[email protected]>
• st: operations with multiple conditions
  • From: "Kristen Shorette" <[email protected]>
• st: RE: Use fixed-effects' coefficients in a second regression
  • From: "Schaffer, Mark E" <[email protected]>
• st: RE: Calculate "running" standard deviation
  • From: Nick Cox <[email protected]>
• st: RE: within estimator as "phyrric-victory" in corporate finance?
  • From: Nick Cox <[email protected]>
• RE: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• st: question test of proportions
  • From: martine etienne <[email protected]>
• Re: st: How can I merge two datasets with multiple unique identifiers?
  • From: Neil Shephard <[email protected]>
• Re: st: How can I merge two datasets with multiple unique identifiers?
  • From: Ulrich Kohler <[email protected]>
• st: How can I merge two datasets with multiple unique identifiers?
  • From: Qursum Qasim <[email protected]>
• st: Calculate "running" standard deviation
  • From: "Poliquin, Christopher" <[email protected]>
• st: RE: within estimator as "phyrric-victory" in corporate finance?
  • From: "Schaffer, Mark E" <[email protected]>
• st: Use fixed-effects' coefficients in a second regression
  • From: Fabien Bertho <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Grethe Søndergaard <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Steven Samuels <[email protected]>
• st: within estimator as "phyrric-victory" in corporate finance?
  • From: Erasmo Giambona <[email protected]>
• st: New version of -bspline- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: svyset simple question
  • From: Steven Samuels <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• st: New version of -bmjcip- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Ada Ma <[email protected]>
• Re: st: Problems with expand og reverting to original dataset
  • From: Nick Cox <[email protected]>
• st: Problems with expand og reverting to original dataset
  • From: Grethe Søndergaard <[email protected]>
• st: wald test when I use GMM method in stata 11
  • From: Song Nhac <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Neil Shephard <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Ada Ma <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Ada Ma <[email protected]>
• RE: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Alex Eapen <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Neil Shephard <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Neil Shephard <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles inbatch mode?
  • From: Alex Eapen <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles in batch mode?
  • From: Neil Shephard <[email protected]>
• st: xtset problem: dublicate panel observations in timeperiods
  • From: [email protected]
• RE: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: "Roman Kasal" <[email protected]>
• st: Testing homogeneity and symmetry in QAIDS model with bootstraped standard errors.
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: svyset simple question
  • From: Hassan Chawdhury <[email protected]>
• Re: st: sampling program help
  • From: Steven Samuels <[email protected]>
• Re: st: RE: Problems with the reshape command
  • From: Syed Basher <[email protected]>
• RE: st: RE: Will Stata/MP speed up running multiple dofiles in batch mode?
  • From: Alex Eapen <[email protected]>
• Re: st: RE: Will Stata/MP speed up running multiple dofiles in batch mode?
  • From: Steven Samuels <[email protected]>
• st: RE: Will Stata/MP speed up running multiple dofiles in batch mode?
  • From: Alex Eapen <[email protected]>
• RE: st: RE: Problems with the reshape command
  • From: "POPE, REBECCA" <[email protected]>
• Re: st: RE: Problems with the reshape command
  • From: Syed Basher <[email protected]>
• Re: st: RE: Problems with the reshape command
  • From: Syed Basher <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Steven Samuels <[email protected]>
• Re: st: merge strategy
  • From: Sergiy Radyakin <[email protected]>
• st: merge strategy
  • From: Dimitri Szerman <[email protected]>
• Re: st: RE: Problems with the reshape command
  • From: Nick Cox <[email protected]>
• st: how does 'predict' command implement 'offset' in logit model?
  • From: Leslie Witter <[email protected]>
• st: RE: graph bar & colour
  • From: Nick Cox <[email protected]>
• st: graph bar & colour
  • From: "Allan Reese (Cefas)" <[email protected]>
• st: RE: Problems with the reshape command
  • From: "POPE, REBECCA" <[email protected]>
• st: RE: Problems with the reshape command
  • From: Nick Cox <[email protected]>
• RE: Antwort: st: Fwd: exponential regression in stata
  • From: Nick Cox <[email protected]>
• Re: RE: st: Fwd: exponential regression in stata
  • From: "Bastian Steingros" <[email protected]>
• st: Problems with the reshape command
  • From: Syed Basher <[email protected]>
• Re: Antwort: st: Fwd: exponential regression in stata
  • From: "Bastian Steingros" <[email protected]>
• RE: st: correlation-like table to dyadic pairs transformation
  • From: Sean Taylor <[email protected]>
• Re: st: correlation-like table to dyadic pairs transformation
  • From: Stas Kolenikov <[email protected]>
• RE: st: Fwd: exponential regression in stata
  • From: Nick Cox <[email protected]>
• st: RE: correlation-like table to dyadic pairs transformation
  • From: Nick Cox <[email protected]>
• RE: st: Fwd: exponential regression in stata
  • From: Nick Cox <[email protected]>
• Re: st: RE: moptimize routine that works with quantile regression?
  • From: Tatyana Deryugina <[email protected]>
• Re: st: ICD10?
  • From: roland andersson <[email protected]>
• Re: st: Fwd: exponential regression in stata
  • From: "Bastian Steingros" <[email protected]>
• st: RE: exponential regression in stata
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: correlation-like table to dyadic pairs transformation
  • From: Sorin Krammer <[email protected]>
• RE: st: Keep observations in panel data
  • From: s <[email protected]>
• Antwort: st: Fwd: exponential regression in stata
  • From: Justina Fischer <[email protected]>
• st: RE: comparing between uneven groups using logistic regression??
  • From: "Mak, Timothy" <[email protected]>
• st: Re: Testing for Autocorrelation after Xtreg?
  • From: Christopher Baum <[email protected]>
• Re: st: Fwd: exponential regression in stata
  • From: Nick Cox <[email protected]>
• st: Fwd: exponential regression in stata
  • From: "Bastian Steingros" <[email protected]>
• st: exponential regression in stata
  • From: "Bastian Steingros" <[email protected]>
• Re: st: differences in the ratios of coeffs of 2 nonlinear models
  • From: Maarten buis <[email protected]>
• Re: st: Oaxaca decomposition for Tobit
  • From: Nils Braakmann <[email protected]>
• Re: st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: Steven Samuels <[email protected]>
• Re: st: How to cluster in 2 x 2 tabulation
  • From: Steven Samuels <[email protected]>
• Re: st: How to cluster in 2 x 2 tabulation
  • From: Bo MacInnis <[email protected]>
• st: comparing between uneven groups using logistic regression??
  • From: Alison McCarthy <[email protected]>
• Re: st: How to cluster in 2 x 2 tabulation
  • From: Stas Kolenikov <[email protected]>
• RE: st: Testing for Autocorrelation after Xtreg?
  • From: "Wright, Brad" <[email protected]>
• RE: st: Testing for Autocorrelation after Xtreg?
  • From: "Wright, Brad" <[email protected]>
• Re: st: RE: Propensity score matching -balancing property
  • From: Nyasha Tirivayi <[email protected]>
• RE: re:st: Testing for Autocorrelation after Xtreg?
  • From: "Wright, Brad" <[email protected]>
• st: differences in the ratios of coeffs of 2 nonlinear models
  • From: Mirko <[email protected]>
• st: How to cluster in 2 x 2 tabulation
  • From: Bo MacInnis <[email protected]>
• Re: st: Re: firthlogit
  • From: Nyasha Tirivayi <[email protected]>
• st: condition on imputed data with multiple imputation
  • From: "Mustillo, Sarah A" <[email protected]>
• re:st: Testing for Autocorrelation after Xtreg?
  • From: Christopher F Baum <[email protected]>
• Re: st: Testing for Autocorrelation after Xtreg?
  • From: Fabio Zona <[email protected]>
• st: Testing for Autocorrelation after Xtreg?
  • From: "Wright, Brad" <[email protected]>
• RE: st: Keep observations in panel data
  • From: Nick Cox <[email protected]>
• Re: st: condition on imputed data with multiple imputation
  • From: Stas Kolenikov <[email protected]>
• re:st: constrained rolling regression
  • From: Christopher F Baum <[email protected]>
• RE: st: Keep observations in panel data
  • From: Nick Cox <[email protected]>
• st: condition on imputed data with multiple imputation
  • From: bichtram huynh <[email protected]>
• RE: Re: st: no room to add more double literals
  • From: Nick Cox <[email protected]>
• st: RE: generalized Dunnett's test?
  • From: "Airey, David C" <[email protected]>
• Re: Re: st: no room to add more double literals
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Keep observations in panel data
  • From: Nick Cox <[email protected]>
• Re: Re: st: no room to add more double literals
  • From: Nick Cox <[email protected]>
• st: RE: generalized Dunnett's test?
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: Re: st: no room to add more double literals
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Keep observations in panel data
  • From: Nick Cox <[email protected]>
• st: Keep observations in panel data
  • From: s <[email protected]>
• Re: st: Keep observations in panel data
  • From: Nick Cox <[email protected]>
• st: Keep observations in panel data
  • From: s <[email protected]>
• Re: Re: st: no room to add more double literals
  • From: Christopher Baum <[email protected]>
• st: generalized Dunnett's test?
  • From: "Airey, David C" <[email protected]>
• Re: st: constrained rolling regression
  • From: Maarten buis <[email protected]>
• RE: st: Stata commands "version" and "saved results"
  • From: Marco Ercolani <[email protected]>
• Re: st: R^2 after an ARIMA and ARCH regression
  • From: Nick Cox <[email protected]>
• st: constrained rolling regression
  • From: "Oliver Brümmer" <[email protected]>
• st: Using expand
  • From: Grethe Søndergaard <[email protected]>
• st: R^2 after an ARIMA and ARCH regression
  • From: "[email protected]" <[email protected]>
• Re: st: Stata commands "version" and "saved results"
  • From: Nick Cox <[email protected]>
• st: Stata commands "version" and "saved results"
  • From: Marco Ercolani <[email protected]>
• RE: st: Oaxaca decomposition for Tobit
  • From: Marco Ercolani <[email protected]>
• RE: st: where next after nl?
  • From: Maarten buis <[email protected]>
• Re: st: some problems with xtreg that I cannot explain
  • From: Johan Hellstrom <[email protected]>
• finding the right tone [was: Re: st: Oaxaca decomposition for Tobit]
  • From: Maarten buis <[email protected]>
• st: ratio of 2 different surveys estimates? svyset , suest , fpc , nlcom
  • From: "Roman Kasal" <[email protected]>
• Re: st: no room to add more double literals
  • From: Sergiy Radyakin <[email protected]>
• RE: st: where next after nl?
  • From: "Keith Dear" <[email protected]>
• Re: st: svy frequency question
  • From: Jet <[email protected]>
• Re: st: RE: Robust instrumental variable regression
  • From: Austin Nichols <[email protected]>
• Re: st: svy frequency question
  • From: Sarah Elizabeth Edgington <[email protected]>
• Re: st: table of correlations
  • From: Rodrigo Briceño <[email protected]>
• st: svy frequency question
  • From: Jet <[email protected]>
• st: svy frequency question
  • From: Jet <[email protected]>
• Re: st: Predicted Odds Following Logistic Regression,
  • From: Melissa King <[email protected]>
• Re: st: Oaxaca decomposition for Tobit
  • From: FARIDA HUSNA <[email protected]>
• RE: st: RE: Comparing fixed effect regression coefficients between two groups
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: moptimize routine that works with quantile regression?
  • From: Maarten buis <[email protected]>
• Re: st: Weighted Averages
  • From: Steven Samuels <[email protected]>
• Re: st: Weighted Averages
  • From: Christopher Steiner <[email protected]>
• st: RE: moptimize routine that works with quantile regression?
  • From: Nick Cox <[email protected]>
• st: moptimize routine that works with quantile regression?
  • From: Tatyana Deryugina <[email protected]>
• st: RE: heckman model
  • From: "Vassilopoulos Achilleas" <[email protected]>
• Re: st: RE: Comparing fixed effect regression coefficients between two groups
  • From: "Dominik Hennen" <[email protected]>
• st: Oaxaca decomposition for Tobit
  • From: Marco Ercolani <[email protected]>
• Re: st: confirmatory factor analysis using gllam in stata
  • From: Stas Kolenikov <[email protected]>
• RE: Re: st: ARDL bounds test
  • From: Nick Cox <[email protected]>
• R: Re: st: ARDL bounds test
  • From: "[email protected]" <[email protected]>
• Re: st: Weighted Averages
  • From: Steven Samuels <[email protected]>
• Re: st: heckman model
  • From: Maarten buis <[email protected]>
• st: heckman model
  • From: "[email protected]" <[email protected]>
• st: RE: Comparing fixed effect regression coefficients between two groups
  • From: "Schaffer, Mark E" <[email protected]>
• st: Error arising using '&' in the cells option of -esttab-
  • From: Jamie Fagg <[email protected]>
• st: Testing for Overidentification in Treatreg Two Step
  • From: "Ross, Justin" <[email protected]>
• st: Comparing fixed effect regression coefficients between two groups
  • From: "Dominik Hennen" <[email protected]>
• Re: st: Predicted Odds Following Logistic Regression
  • From: Maarten buis <[email protected]>
• Re: st: Predicted Odds Following Logistic Regression
  • From: Melissa King <[email protected]>
• RE: st: table of correlations
  • From: Nick Cox <[email protected]>
• st: drawing graph for quantile regression after using multiple imputation (ICE command)
  • From: Elisabetta Petracci <[email protected]>
• RE: st: table of correlations
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: Ivan Png <[email protected]>
• RE: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: DE SOUZA Eric <[email protected]>
• Re: st: ARDL bounds test
  • From: Maarten buis <[email protected]>
• Re: st: where next after nl?
  • From: Maarten buis <[email protected]>
• st: where next after nl?
  • From: "Keith Dear" <[email protected]>
• Re: st: Centering variables for interactions and using mi regress
  • From: Richard Williams <[email protected]>
• Re: st: Re: firthlogit
  • From: "Joseph Coveney" <[email protected]>
• st: confirmatory factor analysis using gllam in stata
  • From: "Hong, Sounman" <[email protected]>
• Re: st: Centering variables for interactions and using mi regress
  • From: Amy S <[email protected]>
• Antwort: st: model fitness test after ivreg
  • From: Justina Fischer <[email protected]>
• st: model fitness test after ivreg
  • From: xueliansharon <[email protected]>
• st: Why Is My Conditional Probability Program Taking So Long to Run?
  • From: "Brad Wright" <[email protected]>
• Re: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: Ivan Png <[email protected]>
• RE: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: "Schaffer, Mark E" <[email protected]>
• st: RE: negative Hausman Test and how to use Xtoverid
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Creating dummy variables for country dataset
  • From: Eric Booth <[email protected]>
• Re: st: Weighted Averages
  • From: Steven Samuels <[email protected]>
• st: MIME-Version: 1.0
  • From: Fabio Zona <[email protected]>
• st: ARDL bounds test
  • From: "[email protected]" <[email protected]>
• RE: st: How to generate conditional random numbers?
  • From: Grace Jessie <[email protected]>
• st: negative Hausman Test and how to use Xtoverid
  • From: May Ster <[email protected]>
• Re: st: Re: firthlogit
  • From: Nyasha Tirivayi <[email protected]>
• Re: st: How to generate conditional random numbers?
  • From: Maarten buis <[email protected]>
• RE: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: DE SOUZA Eric <[email protected]>
• RE: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: "Schaffer, Mark E" <[email protected]>
• st: How to generate conditional random numbers?
  • From: Grace Jessie <[email protected]>
• Re: st: Why does "di round(85*0.7)" equal 59, rather not 60 ?
  • From: Maarten buis <[email protected]>
• RE: st: Why does "di round(85*0.7)" equal 59, rather not 60 ?
  • From: Grace Jessie <[email protected]>
• st: Why does "di round(85*0.7)" equal 59, rather not 60 ?
  • From: Grace Jessie <[email protected]>
• RE: st: Creating dummy variables for country dataset
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Predicted Odds Following Logistic Regression
  • From: Maarten buis <[email protected]>
• Re: st: Creating dummy variables for country dataset
  • From: "Daniel Klein" <[email protected]>
• Re: st: RE: use dummy variable for nonmissing data
  • From: Nick Cox <[email protected]>
• st: RE: Replacing all values
  • From: "Kieran McCaul" <[email protected]>
• Re: st: Creating dummy variables for country dataset
  • From: Eric Booth <[email protected]>
• Re: st: Replacing all values
  • From: Eric Booth <[email protected]>
• st: Replacing all values
  • From: Jonathan Brown <[email protected]>
• Re: st: RE: RE: xtivreg2 -- Instruments dropped
  • From: Ivan Png <[email protected]>
• RE: st: RE: Propensity score matching -balancing property
  • From: "Millimet, Daniel" <[email protected]>
• st: Re: firthlogit
  • From: "Joseph Coveney" <[email protected]>
• st: xtivreg2 -- Instruments dropped
  • From: Ivan Png <[email protected]>
• st: firthlogit
  • From: Nyasha Tirivayi <[email protected]>
• st: Weighted Averages
  • From: Christopher Steiner <[email protected]>
• Re: st: Centering variables for interactions and using mi regress
  • From: Richard Williams <[email protected]>
• RE: st: Creating dummy variables for country dataset
  • From: DE SOUZA Eric <[email protected]>
• st: Centering variables for interactions and using mi regress
  • From: Amy S <[email protected]>
• Antw: st: RE: use dummy variable for nonmissing data
  • From: "Rainald Borck" <[email protected]>
• st: Predicted Odds Following Logistic Regression
  • From: Melissa King <[email protected]>
• Re: st: RE: Propensity score matching -balancing property
  • From: Nyasha Tirivayi <[email protected]>
• st: Creating dummy variables for country dataset
  • From: Saudamini Dabak <[email protected]>
• st: RE: Propensity score matching -balancing property
  • From: "Millimet, Daniel" <[email protected]>
• st: RE: initial values in ivprobit
  • From: "Brian P. Poi" <[email protected]>
• st: RE: RE: xtivreg2 -- Instruments dropped
  • From: "Schaffer, Mark E" <[email protected]>
• st: RE: xtivreg2 -- Instruments dropped
  • From: DE SOUZA Eric <[email protected]>
• st: xtivreg2 -- Instruments dropped
  • From: Ivan Png <[email protected]>
• Re: st: Mean calculation under consideration of different dates
  • From: Nick Cox <[email protected]>
• Re: st: How to input panel data in stata
  • From: Amir Sariaslan <[email protected]>
• st: How to input panel data in stata
  • From: Saudamini Dabak <[email protected]>
• st: Propensity score matching -balancing property
  • From: Nyasha Tirivayi <[email protected]>
• st: Xtoverid and negative Hausman Test
  • From: May Ster <[email protected]>
• Re: st: table of correlations
  • From: Stas Kolenikov <[email protected]>
• st: table of correlations
  • From: Rodrigo Briceño <[email protected]>
• st: Problem with Seemingly Unrelated Regression (SUR)
  • From: Jennifer M Keister <[email protected]>
• Re: st: RE: Robust instrumental variable regression
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• RE: st: xtivreg2 error message
  • From: "Schaffer, Mark E" <[email protected]>
• st: some problems with xtreg that I cannot explain
  • From: Narasimhan Sowmyanarayanan <[email protected]>
• Re: st: Robust instrumental variable regression
  • From: Stas Kolenikov <[email protected]>
• Re: st: Robust instrumental variable regression
  • From: Austin Nichols <[email protected]>
• Re: st: Mean calculation under consideration of different dates
  • From: [email protected]
• RE: st: RE: Robust instrumental variable regression
  • From: Nick Cox <[email protected]>
• RE: st: RE: Robust instrumental variable regression
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: RE: Robust instrumental variable regression
  • From: Steven Samuels <[email protected]>
• Re: st: How to save do-file editor preferences in Stata 11?
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: How to save do-file editor preferences in Stata 11?
  • From: "ali hashemi" <[email protected]>
• RE: st: RE: Robust instrumental variable regression
  • From: Nick Cox <[email protected]>
• st: RE: Basic Questions: Storing multiple results and data for future use
  • From: "Ben Hoen" <[email protected]>
• st: RE: use dummy variable for nonmissing data
  • From: Nick Cox <[email protected]>
• st: initial values in ivprobit
  • From: xueliansharon <[email protected]>
• st: Basic Questions: Storing multiple results and data for future use
  • From: "Ben Hoen" <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: Sergiy Radyakin <[email protected]>
• st: use dummy variable for nonmissing data
  • From: "Rainald Borck" <[email protected]>
• st: Is demeaning variables that cover different time periods, but are used in the same regression, a problem?
  • From: Bertel Teilfeldt Hansen <[email protected]>
• st: RE: Minimum Distance after System-GMM with xtabond2
  • From: "Nelson, Carl" <[email protected]>
• Re: AW: st: Creating local from levelsof exceeding 255 characters
  • From: Roger Newson <[email protected]>
• st: RE: Robust instrumental variable regression
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: estimates replay after exiting STATA
  • From: Maarten buis <[email protected]>
• st: estimates replay after exiting STATA
  • From: Nicolás Rojas <[email protected]>
• Re: AW: st: Creating local from levelsof exceeding 255 characters
  • From: Maarten buis <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: Nick Cox <[email protected]>
• AW: st: Creating local from levelsof exceeding 255 characters
  • From: "Palan, Stefan ([email protected])" <[email protected]>
• RE: st: RE: Robust instrumental variable regression
  • From: Jan Bryla <[email protected]>
• Re: st: RE: Robust instrumental variable regression
  • From: Maarten buis <[email protected]>
• Re: st: xtivreg2 error message
  • From: "Joao Ricardo F. Lima" <[email protected]>
• st: Robust instrumental variable regression
  • From: "Ramiro H. Gálvez" <[email protected]>
• st: RE: Robust instrumental variable regression
  • From: Jan Bryla <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: Maarten buis <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: "Palan, Stefan ([email protected])" <[email protected]>
• Re: st: mata within the loop does not work
  • From: Maarten buis <[email protected]>
• st: mata within the loop does not work
  • From: Oleksandr Shepotylo <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: Nick Cox <[email protected]>
• Re: st: Creating local from levelsof exceeding 255 characters
  • From: Maarten buis <[email protected]>
• st: Minimum Distance after System-GMM with xtabond2
  • From: Murod Aliyev <[email protected]>
• st: Creating local from levelsof exceeding 255 characters
  • From: "Palan, Stefan ([email protected])" <[email protected]>
• st: Re: ## Interaction syntax
  • From: Robin Jeffries <[email protected]>
• Re: st: Margins command
  • From: "Michael N. Mitchell" <[email protected]>
• Re: st: Margins command
  • From: Richard Williams <[email protected]>
• st: Margins command
  • From: Robin Jeffries <[email protected]>
• Re: st: Stata programming question
  • From: Sergiy Radyakin <[email protected]>
• st: how to determine the sample size and assess the validity of a poll
  • From: Xin Lu <[email protected]>
• st: Stata programming question
  • From: "Data Analytics Corp." <[email protected]>
• st: Constraining covariance (HLM)
  • From: "Saul G. Alamilla" <[email protected]>
• st: xtivreg2 error message
  • From: Anastasiya Zavyalova <[email protected]>
• st: Re: Seemingly unrelated estimation
  • From: Austin Nichols <[email protected]>
• [no subject]
  • From: meysam poorkavoos <[email protected]>
• re:st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Fabien Bertho <[email protected]>
• [no subject]
  • From: Unknown
• st: merging variables with labels
  • From: "Ben Hoen" <[email protected]>
• Re: st: margins for 1 standard deviation change
  • From: Maarten buis <[email protected]>
• Re: st: Crosstabs with multiple variables?
  • From: Richard Goldstein <[email protected]>
• re:st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Christopher Baum <[email protected]>
• st: stdp and stdf after glm
  • From: "Abdul Q Memon" <[email protected]>
• Antwort: st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Justina Fischer <[email protected]>
• st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Fabien Bertho <[email protected]>
• RE: st: What determines ytitle distance from graph
  • From: DE SOUZA Eric <[email protected]>
• st: RE: spatwmat for panel data?
  • From: Gordon Hughes <[email protected]>
• re: st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Christopher Baum <[email protected]>
• st: ivreg, ivreg2 and select variables that have to be dropped
  • From: Fabien Bertho <[email protected]>
• RE: st: What determines ytitle distance from graph
  • From: DE SOUZA Eric <[email protected]>
• Re: st: merging variables with labels
  • From: Nick Cox <[email protected]>
• Re: st: What determines ytitle distance from graph
  • From: Nick Cox <[email protected]>
• st: What determines ytitle distance from graph
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Question about blabel
  • From: Nick Cox <[email protected]>
• RE: st: significant figures in regression P values
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Install ado Files on Mac (different from Windows PC?)
  • From: Nils Braakmann <[email protected]>
• st: Question about blabel
  • From: "Vitorino, Maria Ana" <[email protected]>
• Re: st: merging variables with labels
  • From: Sergiy Radyakin <[email protected]>
• st: significant figures in regression P values
  • From: "Delahanty, Ryan" <[email protected]>
• Re: st: Crosstabs with multiple variables?
  • From: David Kantor <[email protected]>
• st: Crosstabs with multiple variables?
  • From: Jonathan Mendelson <[email protected]>
• st: merging variables with labels
  • From: "Ben Hoen" <[email protected]>
• Re: st: graph axis scale
  • From: Friedrich Huebler <[email protected]>
• st: graph axis scale
  • From: Rodrigo Briceño <[email protected]>
• st: Re:Query re. US job search engine in academia/social sciences
  • From: Kay Walker <[email protected]>
• Re: st: reshape value label bug?
  • From: Sergiy Radyakin <[email protected]>
• Re: st: areg - number of categories
  • From: Richard Goldstein <[email protected]>
• st: areg - number of categories
  • From: "Ben Hoen" <[email protected]>
• st: margins for 1 standard deviation change
  • From: David Souther <[email protected]>
• Re: st: reshape value label bug?
  • From: Jeph Herrin <[email protected]>
• Re: st: Install ado Files on Mac (different from Windows PC?)
  • From: Sergiy Radyakin <[email protected]>
• Re: st: Prediction and confidence interval after glm
  • From: Nick Cox <[email protected]>
• Re: st: Mean calculation under consideration of different dates
  • From: Nick Cox <[email protected]>
• st: Prediction and confidence interval after glm
  • From: "Abdul Q Memon" <[email protected]>
• Re: st: Mean calculation under consideration of different dates
  • From: [email protected]
• st: Query re. US job search engine in academia/social sciences
  • From: Eleonora Paesen <[email protected]>
• Re: st: Install ado Files on Mac (different from Windows PC?)
  • From: Neil Shephard <[email protected]>
• st: RE: spatwmat for panel data?
  • From: "Ingham, Hilary" <[email protected]>
• Re: st: Install ado Files on Mac (different from Windows PC?)
  • From: Ronan Conroy <[email protected]>
• st: spatwmat for panel data?
  • From: Natalie Trapp <[email protected]>
• Re: st: Install ado Files on Mac (different from Windows PC?)
  • From: Neil Shephard <[email protected]>
• st: Install ado Files on Mac (different from Windows PC?)
  • From: Nils Braakmann <[email protected]>
• Re: st: RE: -gmm- and incorporate offset/exposure variable?
  • From: David Ward <[email protected]>
• Antwort: Re: st: ## Interaction syntax
  • From: Justina Fischer <[email protected]>
• Re: st: ## Interaction syntax
  • From: "Michael N. Mitchell" <[email protected]>
• st: RE: -gmm- and incorporate offset/exposure variable?
  • From: "Brian P. Poi" <[email protected]>
• st: ## Interaction syntax
  • From: Robin Jeffries <[email protected]>
• Re: st: micombine
  • From: Elisabetta Petracci <[email protected]>
• st: -gmm- and incorporate offset/exposure variable?
  • From: David Ward <[email protected]>
• st: Problem probing interaction
  • From: Kris Anderson <[email protected]>
• Re: st: reshape value label bug?
  • From: Sergiy Radyakin <[email protected]>
• [no subject]
  • From: Murod Aliyev <[email protected]>
• Re: st: GPU use in Stata 12?
  • From: Neil Shephard <[email protected]>
• Re: st: micombine
  • From: Kristen Budd <[email protected]>
• Re: st: micombine
  • From: Maarten buis <[email protected]>
• Re: st: micombine
  • From: Kristen Budd <[email protected]>
• st: micombine
  • From: Elisabetta Petracci <[email protected]>
• st: GPU use in Stata 12?
  • From: László Sándor <[email protected]>
• Re: st: marginal effect Nested Logit regression
  • From: Maarten buis <[email protected]>
• st: reshape value label bug?
  • From: Jeph Herrin <[email protected]>
• st: RE: marginal effect Nested Logit regression
  • From: Jan Bryla <[email protected]>
• st: marginal effect Nested Logit regression
  • From: alfredo jimenez palmero <[email protected]>
• st: Precision in outsheet and outfile
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: testing the joint significance
  • From: Nirina F <[email protected]>
• st: st: Re: st: Re: st: generating variables for group members conditional on member's own values and values for other group members‏
  • From: [email protected]
• Re: st: testing the joint significance
  • From: Maarten buis <[email protected]>
• st: testing the joint significance
  • From: Nirina F <[email protected]>
• st: Exploring the cloud of individuals in two dimensions after MCA in Stata 11
  • From: Tomasz Drabowicz <[email protected]>
• st: granger test
  • From: Rodrigo Briceño <[email protected]>
• st: FW: How to use saved results of spwmatrix in matrix?
  • From: "Renger van Nieuwkoop" <[email protected]>
• Re: st: How do I obtain the Prob > F from the scalars?
  • From: Phil Clayton <[email protected]>
• Re: st: How do I obtain the Prob > F from the scalars?
  • From: Scott Talkington <[email protected]>
• Re: st: Mata not computing eigenvectors/values
  • From: Zachary Neal <[email protected]>
• st: RE: Eststo and Esttab
  • From: Nick Cox <[email protected]>
• Re: st: Eststo and Esttab
  • From: Austin Nichols <[email protected]>
• Re: st: Mata not computing eigenvectors/values
  • From: Steven Samuels <[email protected]>
• st: Time-varying characteristics in a Panel Data.
  • From: natasha agarwal <[email protected]>
• st: Eststo and Esttab
  • From: Claude Francoeur <[email protected]>
• Re: st: Mata not computing eigenvectors/values
  • From: Zachary Neal <[email protected]>
• st: extracting fixed effects from xtabond2
  • From: "Perdikaki, Olga" <[email protected]>
• st: Re: st: Re: st: generating variables for group members conditional on member's own values and values for other group members‏
  • From: Eric Booth <[email protected]>
• RE: Antwort: RE: st: Marginal Effect
  • From: Maarten buis <[email protected]>
• Antwort: RE: st: Marginal Effect
  • From: Justina Fischer <[email protected]>
• Re: st: Mata not computing eigenvectors/values
  • From: Steven Samuels <[email protected]>
• RE: st: Marginal Effect
  • From: Maarten buis <[email protected]>
• RE: st: Marginal Effect
  • From: "[email protected]" <[email protected]>
• R: re:st: R: RE: Quick doubt about the 2-way clustering option used in
  • From: Jordana Rodrigues Cunha <[email protected]>
• Re: st: question about the Roy zelner test of poolability
  • From: amatoallah ouchen <[email protected]>
• st: R: RE: Quick doubt about the 2-way clustering option used in IV_GMM2s
  • From: Jordana Rodrigues Cunha <[email protected]>
• re:st: R: RE: Quick doubt about the 2-way clustering option used in
  • From: Christopher Baum <[email protected]>
• st: RE: Quick doubt about the 2-way clustering option used in IV_GMM2s
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: question about the Roy zelner test of poolability
  • From: Nick Cox <[email protected]>
• Re: st: Sorting relationship dates to get a correct chronological sequence
  • From: Nick Cox <[email protected]>
• Re: st: Sorting relationship dates to get a correct chronological sequence
  • From: Anna Reimondos <[email protected]>
• st: Re: st: generating variables for group members conditional on member's own values and values for other group members‏
  • From: [email protected]
• Re: st: Sorting relationship dates to get a correct chronological sequence
  • From: Nick Cox <[email protected]>
• st: Quick doubt about the 2-way clustering option used in IV_GMM2s
  • From: Jordana Rodrigues Cunha <[email protected]>
• st: Sorting relationship dates to get a correct chronological sequence
  • From: Anna Reimondos <[email protected]>
• Re: st: Mata not computing eigenvectors/values
  • From: Matthew J Baker <[email protected]>
• Re: st: Problem computing eigenvalues, STATA vs. MATA
  • From: Steven Samuels <[email protected]>
• st: Marginal Effect after bioprobit?
  • From: Sergio Prada <[email protected]>
• st: Mata not computing eigenvectors/values
  • From: Zachary Neal <[email protected]>
• Re: st: Problem computing eigenvalues, STATA vs. MATA
  • From: Zachary Neal <[email protected]>
• Re: st: row wise summation in panel data for particular IDs
  • From: Eric Booth <[email protected]>
• Re: st: row wise summation in panel data for particular IDs
  • From: Eric Booth <[email protected]>
• Re: st: row wise summation in panel data for particular IDs
  • From: [email protected]
• st: row wise summation in panel data for particular IDs
  • From: [email protected]
• Re: st: generating variables for group members conditional on member's own values and values for other group members‏
  • From: Eric Booth <[email protected]>
• st: XTSet: Imputed longitudinal panel data
  • From: "Castle, Melissa H" <[email protected]>
• Re: st: Problem computing eigenvalues, STATA vs. MATA
  • From: Herberto Gomez <[email protected]>
• st: question about the Roy zelner test of poolability
  • From: amatoallah ouchen <[email protected]>
• st: Re: xtmelogit questions , thanks!
  • From: Maarten buis <[email protected]>
• Re: st: Problem computing eigenvalues, STATA vs. MATA
  • From: Steven Samuels <[email protected]>
• st: question about the Roy zelner test of poolability
  • From: amatoallah ouchen <[email protected]>
• st: generating variables for group members conditional on member's own values and values for other group members‏
  • From: [email protected]
• Re: st: Problem computing eigenvalues, STATA vs. MATA
  • From: Austin Nichols <[email protected]>
• st: Problem computing eigenvalues, STATA vs. MATA
  • From: Zachary Neal <[email protected]>
• Re: st: How do I obtain the Prob > F from the scalars?
  • From: Phil Clayton <[email protected]>
• st: How do I obtain the Prob > F from the scalars?
  • From: Scott Talkington <[email protected]>
• st: Re: test for unordered multinomial responce of mathed paired samples
  • From: "Joseph Coveney" <[email protected]>
• Re: st: test for unordered multinomial responce of mathed paired samples
  • From: Richard Goldstein <[email protected]>
• st: Fwd: Ranking derived from sports scores
  • From: Austin Nichols <[email protected]>
• st: xtserial
  • From: Fabio Zona <[email protected]>
• st: test for unordered multinomial responce of mathed paired samples
  • From: "Shoryoku Hino" <[email protected]>
• Re: st: hprescott command with by prefix for panel data
  • From: Tirthankar Chakravarty <[email protected]>
• st: hprescott command with by prefix for panel data
  • From: "Andreas Ferrara" <[email protected]>
• Re: st: locally weighted regression with weighted data
  • From: Austin Nichols <[email protected]>
• st: Fwd: Ranking derived from sports scores
  • From: Jeff Davies <[email protected]>
• st: New version of -qqvalue- on SSC
  • From: Roger Newson <[email protected]>
• st: Bootstrapped p-values for regressions with clustered data with few clusters
  • From: Jacob Felson <[email protected]>
• Re: st: New version of -qqvalue- for SSC
  • From: Roger Newson <[email protected]>
• st: New version of -qqvalue- for SSC
  • From: Roger Newson <[email protected]>
• st: Package -couliari- now available in SSC
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: SSC Archive updates
  • From: Christopher Baum <[email protected]>
• Re: st: locally weighted regression with weighted data
  • From: Prashant <[email protected]>
• RE: st: locally weighted regression with weighted data
  • From: Nick Cox <[email protected]>
• Re: st: width() invalid error when using a local macro to loop over years
  • From: Diederik van Liere <[email protected]>
• st: New version of -xrewide- on SSC
  • From: Roger Newson <[email protected]>
• st: Marginal Effect after bioprobit?
  • From: Claudia Berg <[email protected]>
• Re: st: locally weighted regression with weighted data
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: Upcoming NetCourses
  • From: Kerry Kammire <[email protected]>
• st: Re: standard errors in ivreg2
  • From: Christopher Baum <[email protected]>
• Antwort: Re: st: Problems with defining varable interactions in ANOVA
  • From: Justina Fischer <[email protected]>
• Re: st: RE: Refer to specific BLOCK of data for reading in ASCII
  • From: Michael Boehm <[email protected]>
• st: RE: Refer to specific BLOCK of data for reading in ASCII
  • From: Nick Cox <[email protected]>
• st: RE: matrix dissimilarity
  • From: Nick Cox <[email protected]>
• st: RE: Problems with defining varable interactions in ANOVA
  • From: Nick Cox <[email protected]>
• Re: st: Problems with defining varable interactions in ANOVA
  • From: Richard Goldstein <[email protected]>
• RE: st: How to rename a list of all consecutive variables in a data set?
  • From: Nick Cox <[email protected]>
• st: locally weighted regression with weighted data
  • From: Florian Scheuer <[email protected]>
• Re: st: Problems with defining varable interactions in ANOVA
  • From: Neil Shephard <[email protected]>
• st: Problems with defining varable interactions in ANOVA
  • From: "Rom Litwin" <[email protected]>
• Re: st: xtfevd version compatible with Stata 10 needed
  • From: Christopher Baum <[email protected]>
• Re: st: How to rename a list of all consecutive variables in a data set?
  • From: Neil Shephard <[email protected]>
• st: Refer to specific BLOCK of data for reading in ASCII
  • From: Michael Boehm <[email protected]>
• Re: st: How to rename a list of all consecutive variables in a data set?
  • From: Amir Sariaslan <[email protected]>
• st: matrix dissimilarity
  • From: Alp Eren Yurtseven <[email protected]>
• st: How to rename a list of all consecutive variables in a data set?
  • From: Eleonora Paesen <[email protected]>
• Re: st: xtivreg first stage
  • From: Ari Dothan <[email protected]>
• Re: st: width() invalid error when using a local macro to loop over years
  • From: Nick Cox <[email protected]>
• Re: st: A question for those using Mathematica
  • From: Nick Cox <[email protected]>
• Re: st: tempvar in debugging
  • From: Nick Cox <[email protected]>
• st: RE: xtmelogit questions , thanks!
  • From: Maarten buis <[email protected]>
• st: chow test after rologit
  • From: Bart van Rijsbergen <[email protected]>
• Re: st: xtfevd version compatible with Stata 10 needed
  • From: Maarten buis <[email protected]>
• st: xtfevd version compatible with Stata 10 needed
  • From: "Mate Pleic" <[email protected]>
• st: tempvar in debugging
  • From: Wincent <[email protected]>
• Re: st: A question for those using Mathematica
  • From: Quang Nguyen <[email protected]>
• Re: st: Update of cm2in
  • From: David Kantor <[email protected]>
• st: Testing for binary mediation using logit and survey design adjustments (weights, etc.)
  • From: "G. Vazquez" <[email protected]>
• Re: st: forvalues + egen rsum with missing variables
  • From: Florian Seliger <[email protected]>
• st: Package -fdfilter- now available in SSC
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: wald chi2() missing value (null) with xtgee
  • From: Kamyar Baradaran <[email protected]>
• st: width() invalid error when using a local macro to loop over years
  • From: Diederik van Liere <[email protected]>
• st: Re: text file line-end characters in mixed linux /os X / windows environments
  • From: Kevin Geraghty <[email protected]>
• Re: st: Can't get tabxml to work
  • From: Scott Talkington <[email protected]>
• st: Simple Equation in Stata
  • From: Degas Wright <[email protected]>
• re:st: xtivreg first stage
  • From: Christopher F Baum <[email protected]>
• re:RE: st: Multiple nonlinear equations regression with categorical
  • From: Christopher F Baum <[email protected]>
• Re: st: calculation of standard errors using estat mfx after asclogit
  • From: Nick Cox <[email protected]>
• st: calculation of standard errors using estat mfx after asclogit
  • From: Lisa Pfeiffer <[email protected]>
• Re: st: stptime command issue
  • From: [email protected] (Wesley D. Eddings, StataCorp)
• Re: st: Mean calculation under consideration of different dates
  • From: Nick Cox <[email protected]>
• st: Mean calculation under consideration of different dates
  • From: [email protected]
• Re: st: RE: RE: Data Interpolation
  • From: [email protected]
• RE: st: RE: RE: Data Interpolation
  • From: Michelena, Gabriel Nicol s <[email protected]>
• st: xtivreg first stage
  • From: Ari Dothan <[email protected]>
• Re: st: RE: RE: Data Interpolation
  • From: [email protected]
• RE: st: Multiple nonlinear equations regression with categorical variables
  • From: John Kim <[email protected]>
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Steven Samuels <[email protected]>
• Re: st: forvalues + egen rsum with missing variables
  • From: Nick Cox <[email protected]>
• Re: st: Data Interpolation
  • From: Clive Nicholas <[email protected]>
• Re: st: Update of cm2in
  • From: Roger Newson <[email protected]>
• st: forvalues + egen rsum with missing variables
  • From: Florian Seliger <[email protected]>
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Nick Cox <[email protected]>
• Re: st: Update of cm2in
  • From: Nick Cox <[email protected]>
• st: RE: RE: Data Interpolation
  • From: Jan Bryla <[email protected]>
• Re: st: RE: RE: Data Interpolation
  • From: Nick Cox <[email protected]>
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Amanda Fu <[email protected]>
• Re: st: Can't get tabxml to work
  • From: Neil Shephard <[email protected]>
• Re: st: Can't get tabxml to work
  • From: Nick Cox <[email protected]>
• RE: st: Marginal Effect
  • From: Maarten buis <[email protected]>
• st: Update of cm2in
  • From: Ulrich Kohler <[email protected]>
• st: PRESERVING VARIABLE LABELS AFTER REPEATED COLLAPSE
  • From: Giovanna <[email protected]>
• st: Can't get tabxml to work
  • From: Scott Talkington <[email protected]>
• RE: st: Marginal Effect
  • From: "[email protected]" <[email protected]>
• Re: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: [email protected] (Vince Wiggins, StataCorp)
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Steven Samuels <[email protected]>
• Antwort: Re: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Maarten buis <[email protected]>
• Re: st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Nick Cox <[email protected]>
• re:Re: Re: st: Direction of the effect of the cluster command on the
  • From: Christopher Baum <[email protected]>
• st:how to really combine two 3-dimensional graphs (using one x,y,z axis system)
  • From: Amanda Fu <[email protected]>
• st: RE: Data Interpolation
  • From: Michelena, Gabriel Nicol s <[email protected]>
• st: Data Interpolation
  • From: michael Agu <[email protected]>
• Re: st: Data Interpolation
  • From: michael Agu <[email protected]>
• Re: Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Austin Nichols <[email protected]>
• Re: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Austin Nichols <[email protected]>
• AW: st: qcount convergence
  • From: "Grave, Barbara" <[email protected]>
• Re: Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Christopher Baum <[email protected]>
• RE: st:Bundell and Blond: Sargan Test
  • From: Michelena, Gabriel Nicol s <[email protected]>
• RE: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: DE SOUZA Eric <[email protected]>
• Re: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Neil Shephard <[email protected]>
• RE: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: DE SOUZA Eric <[email protected]>
• RE: Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: DE SOUZA Eric <[email protected]>
• Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• Antwort: RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: DE SOUZA Eric <[email protected]>
• RE: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Data Interpolation
  • From: Nick Cox <[email protected]>
• Antwort: st: Data Interpolation
  • From: Justina Fischer <[email protected]>
• st: Data Interpolation
  • From: michael Agu <[email protected]>
• Antwort: Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• Re: st: Ranking derived from sports scores
  • From: Amir Sariaslan <[email protected]>
• Fwd: st: Ranking derived from sports scores
  • From: Jeff Davies <[email protected]>
• Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Austin Nichols <[email protected]>
• Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Stas Kolenikov <[email protected]>
• Re: st: SMCL not showing properly
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Antwort: Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• Re: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Jacob Felson <[email protected]>
• Antwort: st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Justina Fischer <[email protected]>
• Re: st: Rescaling Fast Fourier Transform
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: Ideal band pass filter
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: SMCL not showing properly
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: Direction of the effect of the cluster command on the standard error depends on the inclusion of a control variable
  • From: Jacob Felson <[email protected]>
• Re: st: Programming help
  • From: Sergiy Radyakin <[email protected]>
• st: Programming help
  • From: Sergio Prada <[email protected]>
• st: Fw: Re: Marginal effects for Heckman model
  • From: Maarten buis <[email protected]>
• Re: st: Programming help
  • From: Sergiy Radyakin <[email protected]>
• RE: st: Marginal Effect
  • From: Maarten buis <[email protected]>
• st: Programming help
  • From: Sergio Prada <[email protected]>
• st: box-pierce test for panel data
  • From: "Lim, Raymond" <[email protected]>
• RE: st: Marginal Effect
  • From: "[email protected]" <[email protected]>
• st: stptime command issue
  • From: Elisabetta Petracci <[email protected]>
• Re: st: Ranking derived from sports scores
  • From: Phil Schumm <[email protected]>
• Re: st: Marginal Effect
  • From: Maarten buis <[email protected]>
• Re: st: Ranking derived from sports scores
  • From: Austin Nichols <[email protected]>
• Re: st: Ranking derived from sports scores
  • From: Phil Schumm <[email protected]>
• st: Marginal Effect
  • From: sazas <[email protected]>
• Re: st: Ranking derived from sports scores
  • From: Austin Nichols <[email protected]>
• st: Ranking derived from sports scores
  • From: Jeff Davies <[email protected]>
• Re: st: sampling program help
  • From: george joseph <[email protected]>
• Re: st: qcount convergence
  • From: Alfonso Miranda <[email protected]>
• st: qcount convergence
  • From: "Grave, Barbara" <[email protected]>
• re:st:Bundell and Blond: Sargan Test
  • From: Christopher Baum <[email protected]>
• [no subject]
  • From: Unknown
• st:Bundell and Blond: Sargan Test
  • From: Michelena, Gabriel Nicol s <[email protected]>
• re: st: Zivot-Andrews test
  • From: Christopher Baum <[email protected]>
• [no subject]
  • From: Unknown
• st: weak-instrument-robust tests in ivreg2
  • From: "Ye, Jingjing" <[email protected]>
• Re: st: bootstrapping results from more than one command
  • From: Kaisa Kotakorpi <[email protected]>
• Re: st: xtivreg- stepwise regression models
  • From: Ari Dothan <[email protected]>
• st: Zivot-Andrews test
  • From: "[email protected]" <[email protected]>
• Antwort: Re: st: xtivreg- stepwise regression models
  • From: Justina Fischer <[email protected]>
• Re: st: xtivreg- stepwise regression models
  • From: Maarten buis <[email protected]>
• Re: st: xtivreg- stepwise regression models
  • From: Neil Shephard <[email protected]>
• st: xtivreg- stepwise regression models
  • From: Ari Dothan <[email protected]>
• Antwort: st: Hausman Query
  • From: Justina Fischer <[email protected]>
• st: RE: Hausman Query
  • From: DE SOUZA Eric <[email protected]>
• st: Hausman Query
  • From: "Ross, Andrew" <[email protected]>
• RE: st: why reg3 dropped constant term ? A resent mail NEW QUESTIONS
  • From: KAMAL MANJU <[email protected]>
• Re: st: why reg3 dropped constant term ? A resent mail NEW QUESTIONS
  • From: Neil Shephard <[email protected]>
• st: Estimate CAPM Beta, panel dataset
  • From: Sheldon Marker <[email protected]>
• re:st: Rescaling Fast Fourier Transform
  • From: Christopher Baum <[email protected]>
• st: Rescaling Fast Fourier Transform
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: sampling program help
  • From: Stas Kolenikov <[email protected]>
• st: sampling program help
  • From: george joseph <[email protected]>
• Re: st: simple plot of fitted probabilities
  • From: Tim Wade <[email protected]>
• Re: st: simple plot of fitted probabilities
  • From: Maarten buis <[email protected]>
• re: Antwort: re: Antwort: re: st: xtreg xtregar
  • From: Christopher Baum <[email protected]>
• Antwort: re: Antwort: re: st: xtreg xtregar
  • From: Justina Fischer <[email protected]>
• re: Antwort: re: st: xtreg xtregar
  • From: Christopher Baum <[email protected]>
• Antwort: re: st: xtreg xtregar
  • From: Justina Fischer <[email protected]>
• re: st: xtreg xtregar
  • From: Christopher Baum <[email protected]>
• re: st: Multiple nonlinear equations regression with categorical variables
  • From: Christopher Baum <[email protected]>
• st: Multiple nonlinear equations regression with categorical variables
  • From: John Kim <[email protected]>
• st: xtreg xtregar
  • From: [email protected]
• st: simple plot of fitted probabilities
  • From: Lloyd Dumont <[email protected]>
• Re: st: two-level dataset, binary outcome, 4 level-2 variables
  • From: Amir Sariaslan <[email protected]>
• Re: st: multigroup histogram
  • From: Scott Merryman <[email protected]>
• [no subject]
  • From: Unknown
• st: AR Wald/F and StockWright LM statistics in ivreg2
  • From: "Ye, Jingjing" <[email protected]>
• st: Update of -dirtools-
  • From: Ulrich Kohler <[email protected]>
• Re: st: Update of khb
  • From: Kristian Karlson <[email protected]>
• st: two-level dataset, binary outcome, 4 level-2 variables
  • From: <[email protected]>
• AW: st: Trivariate ordered probit model in Stata?
  • From: "Karabulut, Yigitcan" <[email protected]>
• st: Update of khb
  • From: Ulrich Kohler <[email protected]>
• RE: Antwort: RE: st: why reg3 dropped constant term ?
  • From: KAMAL MANJU <[email protected]>
• st: VAR-Based Simulation Models Problem
  • From: michael Agu <[email protected]>
• Re: st: or option for ologit does not work after mi stimate
  • From: roland andersson <[email protected]>
• Re: st: bootstrapping results from more than one command
  • From: Stas Kolenikov <[email protected]>
• Re: st: Trivariate ordered probit model in Stata?
  • From: Stas Kolenikov <[email protected]>
• Re: st: comparing results from cluster and stratified analysis
  • From: Grethe Søndergaard <[email protected]>
• st: Stata Journal index
  • From: Christopher Baum <[email protected]>
• st: Trivariate ordered probit model in Stata?
  • From: "Karabulut, Yigitcan" <[email protected]>
• st: bootstrapping results from more than one command
  • From: Kaisa Kotakorpi <[email protected]>
• Re: st: Metandi- diagnostic meta-analysis- error calculating cooks distance
  • From: Roger Harbord <[email protected]>
• Re: st: RE: Re: SVAR in Stata11
  • From: Peter Claeys <[email protected]>
• st: Metandi- diagnostic meta-analysis- error calculating cooks distance
  • From: Jannik Helweg-Larsen <[email protected]>
• Re: st: RE: Re: SVAR in Stata11
  • From: Peter Claeys <[email protected]>
• st: UltraEdit goes OS X
  • From: Ronan Conroy <[email protected]>
• RE: st: RE: Re: SVAR in Stata11
  • From: DE SOUZA Eric <[email protected]>
• Re: st: RE: Re: SVAR in Stata11
  • From: Neil Shephard <[email protected]>
• Re: st: RE: Re: SVAR in Stata11
  • From: Peter Claeys <[email protected]>
• st: RE: Re: SVAR in Stata11
  • From: DE SOUZA Eric <[email protected]>
• st: Re: SVAR in Stata11
  • From: Peter Claeys <[email protected]>
• Re: st: Is there a Stata command/program that facilitates the calculation of dynamic conditional correlations per Engle(2002)?
  • From: Neil Shephard <[email protected]>
• st: Scatterplot grouped data- advice to neophytes (was Scatter plot help.)
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: Ideal band pass filter
  • From: Nick Cox <[email protected]>
• st: Error after -predict- in -apc_ie-
  • From: Steven Samuels <[email protected]>
• Re: st: multigroup histogram
  • From: Austin Nichols <[email protected]>
• st: counting observations
  • From: Jurgen Sidgman <[email protected]>
• st: multigroup histogram
  • From: tigerstale <[email protected]>
• st: Re: st: Constructing an Asset Index in Stata‹Discrepancy between predict command and hand calculations
  • From: Friedrich Huebler <[email protected]>
• st: Ideal band pass filter
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: or option for ologit does not work after mi stimate
  • From: Maarten buis <[email protected]>
• st: Is there a Stata command/program that facilitates the calculation of dynamic conditional correlations per Engle(2002)?
  • From: [email protected]
• st: Constructing an Asset Index in Stata‹Discrepancy between predict command and hand calculations
  • From: Jennnifer Callaghan <[email protected]>
• st: or option for ologit does not work after mi stimate
  • From: roland andersson <[email protected]>
• Re: st: RE: nlsur command for a six commodity demand system
  • From: Yonas Alem <[email protected]>
• Re: st: Two different sampling strategies within the same survey
  • From: Etan Lakam <[email protected]>
• Re: st: Scatter plot help.
  • From: Nick Sanders <[email protected]>
• st: Scatter plot help.
  • From: "Richard C. Feiock" <[email protected]>
• Re: st: is there apc_ie predict post-estimation?
  • From: Wincent <[email protected]>
• st: RE: nlsur command for a six commodity demand system
  • From: "Brian P. Poi" <[email protected]>
• Re: st: Interaction and constraint
  • From: Shige Song <[email protected]>
• Antwort: re: Antwort: RE: st: why reg3 dropped constant term ?
  • From: Justina Fischer <[email protected]>
• re:st: Interaction and constraint
  • From: Christopher Baum <[email protected]>
• re: RE: st: why reg3 dropped constant term ?
  • From: Christopher Baum <[email protected]>
• Re: st: Interaction and constraint
  • From: Maarten buis <[email protected]>
• re: Antwort: RE: st: why reg3 dropped constant term ?
  • From: Christopher Baum <[email protected]>
• st: Interaction and constraint
  • From: Shige Song <[email protected]>
• Antwort: RE: st: why reg3 dropped constant term ?
  • From: Justina Fischer <[email protected]>
• Antwort: RE: st: why reg3 dropped constant term ?
  • From: Justina Fischer <[email protected]>
• Antwort: RE: st: why reg3 dropped constant term ?
  • From: Justina Fischer <[email protected]>
• Re: st: Interpreting random effect variance using GLLAMM versus GLLAPRED
  • From: Maarten buis <[email protected]>
• st: Interpreting random effect variance using GLLAMM versus GLLAPRED
  • From: "Denise Duffy" <[email protected]>
• RE: st: why reg3 dropped constant term ?
  • From: KAMAL MANJU <[email protected]>
• st: nlsur command for a six commodity demand system
  • From: Yonas Alem <[email protected]>
• st: SSC activity, Dec 2010 and year-end report
  • From: Christopher Baum <[email protected]>
• re:RE: st: why reg3 dropped constant term ?
  • From: Christopher Baum <[email protected]>
• RE: st: why reg3 dropped constant term ?
  • From: DE SOUZA Eric <[email protected]>
• Re: st: A Statalist glossary
  • From: Roger Harbord <[email protected]>
• Re: st: ICE: Combining proportions using Rubin's rules via mim
  • From: Stas Kolenikov <[email protected]>
• RE: st: why reg3 dropped constant term ?
  • From: KAMAL MANJU <[email protected]>
• st: ICE: Combining proportions using Rubin's rules via mim
  • From: Leslie Phillips <[email protected]>
• Re: st: text file line-end characters in mixed linux /os X / windows environments
  • From: Neil Shephard <[email protected]>
• Re: st: text file line-end characters in mixed linux /os X / windows environments
  • From: Neil Shephard <[email protected]>
• Re: st: text file line-end characters in mixed linux /os X / windows environments
  • From: Phil Schumm <[email protected]>
• st: A Statalist glossary
  • From: Nick Cox <[email protected]>
• st: Thanks to Statalisters
  • From: "Carlo Lazzaro" <[email protected]>
• Re: st: text file line-end characters in mixed linux /os X / windows environments
  • From: Nick Cox <[email protected]>
• RE: st: Re: statistical test and sensitivity analysis for matched pairs with censoring
  • From: "Shoryoku Hino" <[email protected]>