Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: st: Error message when trying to regression model with eststo prefix.
From
Amal Khanolkar <[email protected]>
To
"[email protected]" <[email protected]>
Subject
RE: st: Error message when trying to regression model with eststo prefix.
Date
Mon, 11 Feb 2013 13:57:46 +0000
Ok, this is what I get for the version of the estout package:
*! version 1.1.0 05nov2008 Ben Jann
- So, I have an older version comapred to Maarten.
I ran:
ssc install estout, replace
and the above version was installed.
Is there anything else I can do to try and get the 2009 version?
Thanks,
/Amal.
________________________________________
From: [email protected] [[email protected]] on behalf of Maarten Buis [[email protected]]
Sent: 11 February 2013 14:35
To: [email protected]
Subject: Re: st: Error message when trying to regression model with eststo prefix.
You are still mixing up -xi:- and factor variable notation. You should
never use the -xi:- prefix in combination with -ib#.varname-.
The example I sent before works for me, so if you are running an up to
date version -estout- on an up to date version of Stata the problem
you have should not happen. So, all I can think of is that you are
still running an old version of -estout-. If I type -which estout- I
get: *! version 3.13 06aug2009 Ben Jann.
-- Maarten
On Mon, Feb 11, 2013 at 2:14 PM, Amal Khanolkar <[email protected]> wrote:
> Thanks for the inputs - but problem persists:
>
> . eststo: xi: logistic verypreterm i.ethnicity2 sex byear if magecat!=. & parity!=. & education!=. & famsit_new2!=. & smoke1!=. & multibirth==1, vce (robust)
> i.ethnicity2 _Iethnicity_1-22 (naturally coded; _Iethnicity_1 omitted)
>
> Logistic regression Number of obs = 1766026
> Wald chi2(23) = 358.39
> Prob > chi2 = 0.0000
> Log pseudolikelihood = -63492.073 Pseudo R2 = 0.0026
>
> ------------------------------------------------------------------------------
> | Robust
> verypreterm | Odds Ratio Std. Err. z P>|z| [95% Conf. Interval]
> -------------+----------------------------------------------------------------
> _Iethnici~_2 | 1.098215 .2049259 0.50 0.616 .7618228 1.583145
> _Iethnici~_3 | 1.002859 .1235384 0.02 0.982 .7877414 1.276722
> _Iethnici~_4 | .9890319 .2408004 -0.05 0.964 .6137163 1.59387
> _Iethnici~_5 | 1.765255 .3048327 3.29 0.001 1.258398 2.476265
> _Iethnici~_6 | 1.485207 .1278522 4.59 0.000 1.25462 1.758173
> _Iethnici~_7 | .7250081 .1818284 -1.28 0.200 .4434716 1.185277
> _Iethnici~_8 | 1.114882 .1489949 0.81 0.416 .8579709 1.448722
> _Iethnici~_9 | .8845685 .1525027 -0.71 0.477 .6309302 1.240171
> _Iethnici~10 | 1.055989 .2317579 0.25 0.804 .6868251 1.623576
> _Iethnici~11 | .7750467 .188535 -1.05 0.295 .4811358 1.248499
> _Iethnici~12 | .9487346 .1232701 -0.41 0.685 .7354399 1.22389
> _Iethnici~13 | 1.494765 .1870169 3.21 0.001 1.169701 1.910164
> _Iethnici~14 | 1.306816 .2362243 1.48 0.139 .9169563 1.862432
> _Iethnici~15 | 1.121471 .2169946 0.59 0.554 .7675174 1.638657
> _Iethnici~16 | 1.371584 .2082696 2.08 0.037 1.018523 1.84703
> _Iethnici~17 | 1.403515 .3641343 1.31 0.191 .844068 2.333762
> _Iethnici~18 | .5622209 .1563278 -2.07 0.038 .326007 .9695875
> _Iethnici~19 | 1.810028 .3975107 2.70 0.007 1.176923 2.783701
> _Iethnici~20 | 1.673301 .0567692 15.17 0.000 1.565654 1.788349
> _Iethnici~21 | 1.132377 .05108 2.76 0.006 1.03656 1.237051
> _Iethnici~22 | 1.523688 .1012357 6.34 0.000 1.337646 1.735605
> sex | .8768431 .0173419 -6.65 0.000 .843504 .9114999
> byear | 1.000675 .0017452 0.39 0.699 .9972599 1.004101
> ------------------------------------------------------------------------------
> (est1 stored)
>
> .
> end of do-file
>
> . eststo: logistic verypreterm i.ethnicity2 sex byear if magecat!=. & parity!=. & education!=. & famsit_new2!=. & smoke1!=. & multibirth==1, vce (robust)
> factor variables not allowed
>
> The first regression above works when I include the 'xi:' prefix, the exact same regression however does not work when 'xi' is dropped.
>
> I'm running 4 logistic regression models with different confounders and I'm using the eststo command as I would like to get all four models side by side:
>
> eststo clear
> eststo: xi: logistic verypreterm i.ethnicity2 sex byear if magecat!=. & parity!=. & education!=. & famsit_new2!=. & smoke1!=. & multibirth==1, vce (robust)
> eststo: xi: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity if education!=. & famsit_new2!=. & smoke1!=. & multibirth==1
> eststo: xi: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity ib2.education i.famsit_new2 if smoke1!=. & multibirth==1, vce (robust)
> eststo: xi: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity ib2.education i.famsit_new2 i.smoke1 if multibirth==1, vce (robust)
> esttab, eform ci
>
>
> or,
>
> eststo clear
> eststo: logistic verypreterm i.ethnicity2 sex byear if magecat!=. & parity!=. & education!=. & famsit_new2!=. & smoke1!=. & multibirth==1, vce (robust)
> eststo: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity if education!=. & famsit_new2!=. & smoke1!=. & multibirth==1
> eststo: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity ib2.education i.famsit_new2 if smoke1!=. & multibirth==1, vce (robust)
> eststo: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity ib2.education i.famsit_new2 i.smoke1 if multibirth==1, vce (robust)
> esttab, eform ci
>
> Thanks,
>
> Amal Khanolkar
> ________________________________________
> From: [email protected] [[email protected]] on behalf of Maarten Buis [[email protected]]
> Sent: 11 February 2013 13:58
> To: [email protected]
> Subject: Re: st: Error message when trying to regression model with eststo prefix.
>
> On Mon, Feb 11, 2013 at 1:38 PM, Amal Khanolkar wrote:
>> I'm trying to run the regression model below. I get an error message that says 'factor variables' not allowed.
>>
>> This is quite strange, given that I ran the exact same regression model last week and had no problems! Can anyone tell me what's going wrong?
>>
>> . eststo: xi: logistic verypreterm i.ethnicity2 sex byear ib3.magecat i.parity if education!=. & famsit_new2!=. & smoke1!=. & multibirth==1, vce (robust)
>
> It seems that you have two problems:
>
> 1) you are mixing -xi:- syntax with factor variable syntax, this is
> obviously a very bad idea. The easiest solution is just leave the
> -xi:- prefix away and all should work as planned.
>
> 2) You have an outdated version of -estout-. So typing in Stata: -ssc
> install estout, replace- should solve that problem. The following
> works just fine for me:
>
> *------------------ begin example ------------------
> sysuse auto, clear
> recode rep78 1/2=3
> eststo: logit foreign i.rep78##c.trunk turn
> esttab
> *------------------- end example -------------------
> (For more on examples I sent to the Statalist see:
> http://www.maartenbuis.nl/example_faq )
>
> Hope this helps,
> Maarten
>
> ---------------------------------
> Maarten L. Buis
> WZB
> Reichpietschufer 50
> 10785 Berlin
> Germany
>
> http://www.maartenbuis.nl
> ---------------------------------
> *
> * For searches and help try:
> * http://www.stata.com/help.cgi?search
> * http://www.stata.com/support/faqs/resources/statalist-faq/
> * http://www.ats.ucla.edu/stat/stata/
>
> *
> * For searches and help try:
> * http://www.stata.com/help.cgi?search
> * http://www.stata.com/support/faqs/resources/statalist-faq/
> * http://www.ats.ucla.edu/stat/stata/
--
---------------------------------
Maarten L. Buis
WZB
Reichpietschufer 50
10785 Berlin
Germany
http://www.maartenbuis.nl
---------------------------------
*
* For searches and help try:
* http://www.stata.com/help.cgi?search
* http://www.stata.com/support/faqs/resources/statalist-faq/
* http://www.ats.ucla.edu/stat/stata/
*
* For searches and help try:
* http://www.stata.com/help.cgi?search
* http://www.stata.com/support/faqs/resources/statalist-faq/
* http://www.ats.ucla.edu/stat/stata/